Just another WordPress site - Ruhr-Universität Bochum
2024
- V. Mohles, Y. Jiang, I. Steinbach et al. Microstructure based model for creep of single crystal superalloys in the high temperature and low stress creep regime. Materials Science and Engineering: A, 909, 146780, (2024)
- R. Shoghi, A. Hartmaier. A machine learning constitutive model for plasticity and strain hardening of polycrystalline metals based on data from micromechanical simulations. Machine Learning: Science and Technology, 5, 025008, (2024)
- J. dos Santos, S. Griesemer, N. Dupin et al. Applying the effective bond energy formalism (EBEF) to describe the sigma (σ) phase in the Co-Cr-Ni-Re system. Journal of Phase Equilibria and Diffusion, 45, 330-357, (2024)
- I. Steinbach, M. Uddagiri, H. Salama et al. Highly complex materials processes as understood by phase-field simulations: Additive manufacturing, bainitic transformation in steel and high-temperature creep of superalloys. MRS Bulletin, 49, 1-11, (2024)
- J. Kundin, A. Riyahi khorasgani, R. Schiedung et al. Modeling vacancy-induced porosity in compositionally-graded complex alloys. Acta Materialia, 271, 119905, (2024)
- Y. Cheng, G. Wang, Z. Qiu et al. Multi-physics simulation of non-equilibrium solidification in Ti-Nb alloy during selective laser melting. Acta Materialia, 272, 119923, (2024)
- M. Stricker, D. Weygand. A model for physical dislocation transmission through grain boundaries and its implementation in a discrete dislocation dynamics tool. Journal of Materials Science: Materials Theory, 8, 12, (2024)
- L. Zhang, M. Stricker. MatNexus: A comprehensive text mining and analysis suite for materials discovery. SoftwareX, 26, 101654, (2024)
- H. Salama, M. Ali, O. Shchyglo et al. Phase-field simulation framework for modeling martensite and bainite formation in steel. Computational Materials Science, 241, 113033, (2024)
- S. Hamdani, S. Abdeslam, A. Hartmaier et al. Atomistic simulation of the influence of semi-coherent interfaces in the V/Fe bilayer system on plastic deformation during nanoindentation. Modelling and Simulation in Materials Science and Engineering, 32, 045012, (2024)
- S. Starikov, Petr Grigorev, R. Drautz et al. Large-scale atomistic simulation of diffusion in refractory metals and alloys. Physical Review Materials, 8, 043603, (2024)
- A. Nammalvar Raja Rajan, M. Krochmal, T. Wegener et al. Micro-macro modeling of tensile behavior of a friction stir welded hybrid joint of AlSi10Mg parts produced by powder bed fusion and casting. Welding in the World, 68, 1693–1705, (2024)
- S. Kunzmann, T. Hammerschmidt, G. Schierning et al. Ab initio study of transition paths between (meta)stable phases of Nb and Ta-substituted Nb. Physical Review Materials, 8, 033603, (2024)
- S. Li, L. Shi, Ji. Chen et al. Effect of hierarchical martensitic microstructures on the ductile-brittle transition behavior of friction stir welded reduced activation ferritic/martensitic steel. Materials Science and Engineering: A, 896, 146324, (2024)
- O. Shchyglo, M. Ali, H. Salama. Efficient finite strain elasticity solver for phase-field simulations. npj Computational Materials, 10, 52, (2024)
- Y. Liang, G. Díaz Leines, R. Drautz et al. Structural transformations driven by local disorder at interfaces. Physical Review Materials, 8, 033402, (2024)
- J. Schmidt, A. Hartmaier. A texture-dependent yield criterion. 11th GAMM AG Data Workshop TU Dresden February 06/07, 2024, 18, (2024)
- R. Khachaturyan, Y. Yang, S. Teng et al. Microscopic insights on field induced switching and domain wall motion in orthorhombic ferroelectrics. Physical Review Materials, 8, 024403, (2024)
- H. Jafarzadeh, O. Shchyglo, I. Steinbach. Multi-phase-field approach to fracture demonstrating the role of solid-solid interface energy on crack propagation. International Journal of Fracture, 245, 75-87, (2024)
- R. Namdar, M. Khodsiani, H. Safari et al. Numerical study of convective heat transfer in static arrangements of particles with arbitrary shapes: A monolithic hybrid lattice Boltzmann-finite difference-phase field solver. Particuology, 85, 186-197, (2024)
- R. Shoghi, L. Morand, D. Helm et al. Optimizing machine learning yield functions using query-by-committee for support vector classification with a dynamic stopping criterion. Computational Mechanics, 73, 1-20, (2024)
- A. Sanna, T. Cerqueira, Y. Fang et al. Prediction of ambient pressure conventional superconductivity above 80 K in hydride compounds. npj Computational Materials, 10, 44, (2024)
- M. Khodsiani, R. Namdar, F. Varnik et al. Spatially resolved investigation of flame particle interaction in a two dimensional model packed bed. Particuology, 85, 167-185, (2024)
- S. Starikov, P. Grigorev, P. A.T. Olsson. Angular-dependent interatomic potential for large-scale atomistic simulation of W-Mo-Nb ternary alloys. Computational Materials Science, 233, 112734, (2024)
- I. Steinbach. Concept of introverted space: is multidimensional, extroverted space an illusion?. Zeitschrift für Naturforschung A, 1, 1-8, (2024)
- B. Bian, S. Taheriniya, G. Muralikrishna et al. Coupling of alloy chemistry, diffusion and structure by grain boundary engineering in Ni–Cr–Fe. Acta Materialia, 264, 119602, (2024)
- J. Selisko, M. Amsler, T. Hammerschmidt et al. Extending the variational quantum eigensolver to finite temperatures. Quantum Science and Technology, 9, 015026, (2024)
- M. Rinaldi, M. Mrovec, A. Bochkarev et al. Non-collinear magnetic atomic cluster expansion for iron. npj Computational Materials, 10, 12, (2024)
- A. Subramanyam, J. Jenke, A. Ladines et al. Parametrization protocol and refinement strategies for accurate and transferable analytic bond-order potentials: Application to Re. Physical Review Materials, 8, 013803, (2024)
- K. Gao, W. Cui, J. Shi et al. Prediction of high- Tc superconductivity in ternary actinium beryllium hydrides at low pressure. Physical Review B, 109, 014501, (2024)
- T. Cerqueira, A. Sanna, M. Marques. Sampling the materials space for conventional superconducting compounds. Advanced Materials, 36, 2307085, (2024)
- A. Bezold, J. Vollhüter, N. Karpstein et al. Segregation-induced strength anomalies in complex single-crystalline superalloys. Communications Materials, 5, 8, (2024)
2023
- A. Riyahi khorasgani, J. Kundin, S. Divinski et al. Carbon effect on thermo-kinetics of Co-Cr-Fe-Mn-Ni high entropy alloys: A computational study validated by interdiffusion experiments. Acta Materialia, 261, 119358, (2023)
- S. Starikov, A. Abbass, R. Drautz et al. Disordering complexion transition of grain boundaries in bcc metals: Insights from atomistic simulations. Acta Materialia, 261, 119399, (2023)
- E. Ibrahim, Y. Lysogorskiy, M. Mrovec et al. Atomic cluster expansion for a general-purpose interatomic potential of magnesium. Physical Review Materials, 7, 113801, (2023)
- S. Starikov, V. Jamebozorgi, D. Smirnova et al. Atomistic simulations of pipe diffusion in bcc transition metals. Acta Materialia, 260, 119294, (2023)
- M. Uddagiri, P. Antala, O. Shchyglo et al. Dendrite operating state in directional solidification of AlCu binary system: numerical benchmark test with the OpenPhase software. Physica Scripta, 98, 115014, (2023)
- L. Huo, R. Schiedung, H. Li et al. Multi-phase field modeling and simulation of magnetically driven grain boundary migration in SmCo polycrystals. Journal of Physics D: Applied Physics, 56, 465003, (2023)
- A. N. Ladines, R. Drautz, T. Hammerschmidt. Off-stoichiometric softening and polytypic transformations in the plastic deformation of the C14 Fe2Nb Laves phase. Acta Materialia, 260, 119326, (2023)
- H. Wang, A. Huran, M. Marques et al. Two-dimensional noble metal chalcogenides in the frustrated snub-square lattice. The Journal of Physical Chemistry Letters, 14, 9969-9977, (2023)
- D. Smirnova, S. Starikov. Atomistic study of hydrogen diffusion in presence of defects in bcc and fcc iron. Computational Materials Science, 230, 112433, (2023)
- M. Uddagiri, O. Shchyglo, I. Steinbach et al. Solidification of the Ni-based superalloy CMSX-4 simulated with full complexity in 3-dimensions. Progress in Additive Manufacturing, 8, 1, (2023)
- A. Demirci, D. Steinberger, M. Stricker et al. Statistical analysis of discrete dislocation dynamics simulations: initial structures, cross-slip and microstructure evolution. Modelling and Simulation in Materials Science and Engineering, 31, 075003, (2023)
- J. Schmidt, A. Hartmaier. A new texture descriptor for data-driven constitutive modeling of anisotropic plasticity. Journal of Materials Science, 58, 14029–14050, (2023)
- T. Schmalofski, M. Kroll, H. Dette et al. Towards active learning: A stopping criterion for the sequential sampling of grain boundary degrees of freedom. Materialia, 31, 101865, (2023)
- Y. Liang, M. Mrovec, Y. Lysogorskiy et al. Atomic cluster expansion for Pt-Rh catalysts: From ab initio to the simulation of nanoclusters in few steps. Journal of Materials Research, 01, 11, (2023)
- M. Qamar, M. Mrovec, Y. Lysogorskiy et al. Atomic cluster expansion for quantum-accurate large-scale simulations of carbon. Journal of Chemical Theory and Computation, 19, 5151–5167, (2023)
- L. Duc Pham, P. Sattler, M. Marques et al. Homogeneous electron liquid in arbitrary dimensions beyond the random phase approximation. New Journal of Physics, 25, 083040, (2023)
- T. Neeraj, C. Velten, G. Janiga et al. Modeling gas flows in packed beds with the Lattice Boltzmann method: Validation against experiments. Flow, Turbulence and Combustion, 111, 463-491, (2023)
- N. Hoffmann, T. Cerqueira, P. Borlido et al. Searching for ductile superconducting Heusler X2YZ compounds. npj Computational Materials, 9, 138, (2023)
- Y. Schneider, V. Guski, A. Sahin et al. Investigation of auxetic structural deformation behavior of PBAT polymers using process and finite element simulation. Polymers, 15, 3142, (2023)
- A. Grünebohm, A. Hütten, A. E. Böhmer et al. A unifying perspective of common motifs that occur across disparate classes of materials harboring displacive phase transitions. Advanced Energy Materials, tbc, 2300754, (2023)
- J. Schmidt, N. Hoffmann, H.-C. Weng et al. Machine-learning-assisted determination of the global zero-temperature phase diagram of materials. Advanced Materials, 35, 2210788, (2023)
- M. Zheng, C. Zhao, X. Yan et al. Metal particle composite hardening in Ba0.85Ca0.15Ti0.90Zr0.10O3 piezoceramics. Advanced Functional Materials, tbc, 2301356, (2023)
- A. Nammalvar Raja Rajan, M. Krochmal, M. Shahmardani et al. Micromechanical modeling of the low-cycle fatigue behavior of additively manufactured AlSi10Mg. Materials Science and Engineering: A, 2023, 145232, (2023)
- M. Azadi Tinat, M. Uddagiri, I. Steinbach et al. Numerical simulations to predict the melt pool dynamics and heat transfer during single-track laser melting of Ni-based superalloy (CMSX-4). Metals, 13, 1091, (2023)
- G. Eshlaghi, G. Egels, S. Benito et al. Three-dimensional microstructure reconstruction for two-phase materials from three orthogonal surface maps. Frontiers in Materials, 10, 1-17, (2023)
- S. Shanmugam, M. Peterlechner, M. Iskandar et al. Coherent twin-oriented Al3Sc-based precipitates in Al matrix. Scripta Materialia, 229, 115351, (2023)
- M. Shahmardani Firouzjah, R. Logvinov, T. Babinský et al. Experimental assessment and micromechanical modeling of additively manufactured austenitic steels under cyclic loading. Advanced Engineering Materials, 25, 2300103, (2023)
- A. Grünebohm, S. Teng, M. Marathe. Influence of domain walls and defects on the electrocaloric effect. Journal of Physics: Energy, 5, 034010, (2023)
- J. Kundin, I. Steinbach, S. Chakraborty. Phase-field simulation of texture evolution in magmatic rocks. JGR Solid Earth, 128, 1-19, (2023)
- H. Parida, J. Kundin, C. Alves. Study of the peritectic phase transformation kinetics with elastic effect in the Fe–C system by quantitative phase-field modeling. Computational Materials Science, 224, 112160, (2023)
- Y. Lysogorskiy, A. Bochkarev, M. Mrovec et al. Active learning strategies for atomic cluster expansion models. Physical Review Materials, 7, 043801, (2023)
- S. Starikov, D. Smirnova. Details of structure transformations in pure uranium and U-Mo alloys: insights from classical atomistic simulation. Journal of Nuclear Materials, 576, 154265, (2023)
- A. Chauniyal, R. Janisch. How coherent and semi-coherent interfaces govern dislocation nucleation in lamellar TiAl alloys. Advanced Engineering Materials, -, 2300121, (2023)
- S. Motahari, A. Chauniyal, R. Janisch. Investigating the microplastic behavior of hierarchical polycrystalline γ-TiAl microstructures. Computational Materials Science, 226, 112197, (2023)
- A. Egorov, A. Subramanyam, Z. Yuan et al. Magnetic bond-order potential for iron-cobalt alloys. Physical Review Materials, 7, 044403, (2023)
- M. Uddagiri, O. Shchyglo, I. Steinbach et al. Phase-field study of the history-effect of remelted microstructures on nucleation during additive manufacturing of Ni-based superalloys. Metallurgical and Materials Transactions A, 54, 18, (2023)
- Y. Jiang, M. Ali, I. Roslyakova et al. 3D phase-field simulations to machine-learn 3D information from 2D micrographs. Modelling and Simulation in Materials Science and Engineering, 31, 035005, (2023)
- M. Ali, O. Shchyglo, M. Stricker et al. Coherency loss marking the onset of degradation in high temperature creep of superalloys: phase-field simulation coupled to strain gradient crystal plasticity. Computational Materials Science, 220, 112069, (2023)
- M. Younan. Effect of composition on high temperature creep of ERBO Ni-based superalloys. Master Thesis, Ruhr-Univerisität Bochum, (2023)
- N. Wang, T. Hammerschmidt, T. Hickel et al. Influence of spin fluctuations on structural phase transitions of iron. Physical Review B, 107, 104108, (2023)
- N. Qi. Preparation and characterization of polymer membranes doped with ionic liquids for fuel cells. Master Thesis, Ruhr-Univerisität Bochum, (2023)
- S. Benito, G. Egels, A. Hartmaier et al. Statistical characterization of segregation-driven inhomogeneities in metallic microstructures employing fast first-order variograms. Materials Today Communications, 34, 105016, (2023)
- F. Pütz, N. Fehlemann, V. Göksu et al. A data driven computational microstructure analysis on the influence of martensite banding on damage in DP-steels. Computational Materials Science, 218, 111903, (2023)
- A. Biswas, D. Kurtulan, T. Ngeru et al. Mechanical behavior of austenitic steel under multi-axial cyclic loading. Materials, 16, 1367, (2023)
- V. Nanayakkara. Numerical simulation of laser powder bed fusion additive manufacturing process of multicomponent Ni-based super alloys. Master Thesis, Ruhr-Universität Bochum, (2023)
- L. Zhao, J. Zhang, J. Zhang et al. Numerical simulation of materials-oriented ultra-precision diamond cutting: review and outlook. International Journal of Extreme Manufacturing, 5, 022001, (2023)
- N. Ölcer. Ab initio simulation of solid solutions of BaTiO3: the role of Ti substitution. Master Thesis, Ruhr-Universität Bochum, (2023)
- J. Hufert, A. Grebhardt, Y. Schneider et al. Deformation behavior of 3D printed auxetic structures of thermoplastic polymers: PLA, PBAT, and blends. Polymers, 15, 389, (2023)
- M. Shahmardani Firouzjah, A. Hartmaier. Microstructure-sensitive crystal plasticity modeling for austenitic steel and nickel-based superalloy under isothermal fatigue loading. Metallurgical and Materials Transactions A, Jan 2023, 1-12, (2023)
- P. Huang. Molecular dynamic simulations of Si surfaces and growth. Master Thesis, Ruhr-Univerisität Bochum, (2023)
- M. Bruns. Simulating and characterizing cryogenic thermal cycling of a model glass former via molecular dynamics simulations. PhD Thesis, Ruhr Universität Bochum, (2023)
- D. Gaertner, J. Kundin, I. Steinbach et al. Tracer diffusion under a concentration gradient: a pathway for a consistent development of mobility databases in multicomponent alloys. Journal of Alloys and Compounds, 930, 167301, (2023)
2022
- C. Lauhoff, T. Pham, A. Paulsen et al. A novel thermo-mechanical processing route exploiting abnormal grain growth in Heusler-type Co–Ni–Ga shape memory alloys. Metallurgical and Materials Transactions A, 53, 4139–4142, (2022)
- K. Ciftci, K. Hackl. Model-free data-driven simulation of inelastic materials using structured data sets, tangent space information and transition rules. Computational Mechanics, 70, 425–435, (2022)
- M. Rinaldi. Modelling magnetism from the electronic structure to continuum for iron and its alloys. PhD Thesis, Ruhr-Univerisität Bochum, (2022)
- A. Bochkarev, Y. Lysogorskiy, C. Ortner et al. Multilayer atomic cluster expansion for semilocal interactions. Physical Review Research, 4, L042019, (2022)
- M. Murat. Numerical analysis of anisotropic yield behavior of single phase titanium aluminide constituents γ-TiAl and α2 -Ti3Al by means of finite element models based on crystal plasticity theory. Master Thesis, Ruhr-Univerisität Bochum, (2022)
- A. Riyahi khorasgani, J. Kundin, S. Divinski et al. Reassessment of mobility parameters for Cantor high entropy alloys through an automated procedure. CALPHAD Journal, 79, 102498, (2022)
- O. Sen. Atomistic simulations of crack-tip interface interactions in TiAl microstructures. Master Thesis, Ruhr-Universität Bochum, (2022)
- S. M. Benito. Design, implementation, and application of original methods of the microstructural characterization of powder metallurgy tool steels. PhD Thesis, Ruhr-Univerisität Bochum, (2022)
- A. Kostka, D. Naujoks, T. Oellers et al. Linear growth of reaction layer during in-situ TEM annealing of thin film Al/Ni diffusion couples. Journal of Alloys and Compounds, 922, 165926, (2022)
- I. Pietka, R. Drautz, T. Hammerschmidt. strucscan: a lightweight Python-based framework for high-throughput material simulation. Journal of Open Source Software, 7, 4719, (2022)
- L. Zhao, J. Zhang, Y. Fu et al. Thermal softening-suppressed inter-granular embrittlement of polycrystalline 3C-SiC under diamond cutting. Materials & Design, 223, 111250, (2022)
- N. Sayer, E. Natkowski, P. Sonnweber-Ribic et al. A novel microscale fatigue failure indicator considering plastic irreversibility for microstructure-based lifetime simulation. International Journal of Fatigue, 163, 107115, (2022)
- B. Xiao, Y. Lysogorskiy, A. Savan et al. Correlations of composition, structure, and hardness in the high-entropy alloy system Nb–Mo–Ta–W. High Entropy Alloys and Materials, 1, 1-22, (2022)
- L. Zhao, J. Zhang, J. Zhang et al. Formation of high density stacking faults in polycrystalline 3C-SiC by vibration-assisted diamond cutting. Journal of the European Ceramic Society, 42, 5448-5457, (2022)
- A. Lagogianni, F. Varnik. Temperature rise inside shear bands in a simple model glass. International Journal of Molecular Sciences, 23, 12159, (2022)
- A. Klomp, R. Khachaturyan, T. Wallis et al. Thermal stability of nanoscale ferroelectric domains by molecular dynamics modeling. Physical Review Materials, 6, 104411, (2022)
- F. Shen, S. Münstermann, J. Lian. A unified fracture criterion considering stress state dependent transition of failure mechanisms in bcc steels at –196 °C. International Journal of Plasticity, 159, 103365, (2022)
- D. Szeliga, Y. Chang, L. Madej et al. Correlating the microstructural heterogeneity with local formability of cold‐rolled dual‐phase and complex‐phase steels through hardness gradients. steel research international, 93, 2200130, (2022)
- V. Khalili, C. Sengstock, Y. Kalchev et al. Exploring MgO/HA ceramic nano-composites for biodegradable implants: Exploring biological properties and micromechanics. Surface and Coatings Technology, 445, 128730, (2022)
- A. Dimou, P. Hirel, A. Grünebohm. Pinning of domain walls by strontium layer in BaTiO3 perovskite: an atomic-scale study. Physical Review B, 106, 094104, (2022)
- S. Ramakers, A. Marusczyk, M. Amsler et al. Effects of thermal, elastic, and surface properties on the stability of SiC polytypes. Physical Review B, 106, 075201, (2022)
- M. Meischein, A. Garzón-Manjón, T. Hammerschmidt et al. Elemental (im-)miscibility determines phase formation of multinary nanoparticles co-sputtered in ionic liquids. Nanoscale Advances, 4, 3855–3869, (2022)
- A. Nammalvar Raja Rajan, M. Krochmal, T. Wegener et al. Micromechanical modeling of AlSi10Mg processed by laser-based additive manufacturing: from as-built to heat-treated microstructures. Materials, 15, 5562, (2022)
- M. Morales Cócera. Sampling equilibrium states in 2D Lennard-Jones systems with Boltzmann generators. Master Thesis, Ruhr-Universität Bochum, (2022)
- D. Wingender, D. Balzani. Simulation of crack propagation through voxel-based, heterogeneous structures based on eigenerosion and finite cells. Computational Mechanics, 70, 385–406, (2022)
- M. Kroll, T. Schmalofski, H. Dette et al. Efficient prediction of grain boundary energies from atomistic simulations via sequential design. Advanced Theory and Simulations, 5, 2100615, (2022)
- M. Zar. FE simulation and surrogate modeling of soda-lime-silica glass glass bending process using the finite element method and Gaussian process regression. Master Thesis, Ruhr-Universität Bochum, (2022)
- A. Shetty. Machine-learning based surrogate modeling of indentation. Master Thesis, Ruhr-Univerisität Bochum, (2022)
- A. Durmaz, E. Natkowski, N. Arnaudov et al. Micromechanical fatigue experiments for validation of microstructure-sensitive fatigue simulation models. International Journal of Fatigue, 160, 106824, (2022)
- A. Dash, A. Paul, S. Sen et al. Recent advances in understanding diffusion in multiprincipal element systems. Annual Review of Materials Research, 52, 383-409, (2022)
- A. Sangsefidi, S. Dibajian, J. Kadkhodapour et al. An Abaqus plugin for evaluation of the Auxetic structure performance. Engineering with Computers, 38, 1681–1704, (2022)
- J. Schmidt, A. Biswas, N. Vajragupta et al. Data-oriented description of texture-dependent anisotropic material behavior. Modelling and Simulation in Materials Science and Engineering, 30, 065001, (2022)
- R. Khachaturyan, A. Dimou, A. Grünebohm. Domain wall acceleration by ultrafast field application: an ab initio‐based molecular dynamics study. Physica status solidi (RRL) – Rapid Research Letters, 16, 2200038, (2022)
- M. Bruns, F. Varnik. Enhanced dynamics in deep thermal cycling of a model glass. The Journal of Chemical Physics, 156, 234501, (2022)
- V. Stieve, M. Blaszczyk, K. Hackl. Inverse modeling of cancellous bone using artificial neural networks. ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 102, 202100541, (2022)
- J.-H. Kang, J. Park, K. Song et al. Microstructure analyses and phase-field simulation of partially divorced eutectic solidification in hypoeutectic Mg-Al alloys. Journal of Magnesium and Alloys, 10, 1672-1679, (2022)
- C.-H. Xia, J. Kundin, I. Steinbach et al. Model for non-equilibrium vacancy diffusion applied to study the Kirkendall effect in high-entropy alloys. Acta Materialia, 232, 117966, (2022)
- M. Joulaian. Pyiron workflow for first-principles field evaporation calculations with applications to bcc metals. Master Thesis, Ruhr-Universität Bochum, (2022)
- H. Kulik, T. Hammerschmidt, J. Schmidt et al. Roadmap on machine learning in electronic structure. Electronic Structure, 4, 023004, (2022)
- N. Athanasopoulos. Atomistically-informed crystal plasticity simulations of hydrogen embrittlement in ferrite. Master Thesis, Ruhr-Universität Bochum, (2022)
- M. Ramaswamy Guru Prasad, A. Biswas, N. Vajragupta et al. Identification of texture characteristics for improved creep behavior of a L-PBF fabricated IN738 alloy through micromechanical simulations. Modelling and Simulation in Materials Science and Engineering, 30, 055007, (2022)
- A. Kunzmann, J. Frenzel, U. Wolff et al. The role of electrons during the martensitic phase transformation in NiTi-based shape memory alloys. Materials Today Physics, 24, 100671, (2022)
- S. Starikov, D. Smirnova, T. Pradhan et al. Angular-dependent interatomic potential for large-scale atomistic simulation of the Fe-Cr-H ternary system. Physical Review Materials, 6, 043604, (2022)
- A. Obaied. Developing state of the art materials informatics methods for Calphad modeling of multicomponent materials. PhD Thesis, Ruhr-Universität Bochum, (2022)
- F. Valiente Dies. Development of a machine learning model to reconstruct 3D microstructures from 2D cuts. Master Thesis, Ruhr-Universität Bochum, (2022)
- M. Stricker, M. Ziemann, M. Walter et al. Dislocation structure analysis in the strain gradient of torsion loading: a comparison between modelling and experiment. Modelling and Simulation in Materials Science and Engineering, 30, 035007, (2022)
- C. Wagner, A. Ferrari, J. Schreuer et al. Effects of Cr/Ni ratio on physical properties of Cr-Mn-Fe-Co-Ni high-entropy alloys. Acta Materialia, 227, 117693, (2022)
- C. Anabaraonye. Ferroelectric composites: The impact of morphology on phase stability. Master Thesis, Ruhr-Universität, (2022)
- H. Wang, K. Uhlmann, V. Vedula et al. Fluid-structure interaction simulation of tissue degradation and its effects on intra-aneurysm hemodynamics. Biomechanics and Modeling in Mechanobiology, 21, 671–683, (2022)
- Y. Schneider, D. Rapp, Y. Yang et al. Many-scale investigations of deformation behavior of polycrystalline composites: II—micro-macro simultaneous FE and discrete dislocation dynamics simulation. Materials, 15, 2852, (2022)
- R. Shoghi, A. Hartmaier. Optimal data-generation strategy for machine learning yield functions in anisotropic plasticity. Frontiers in Materials, 9, 879614154, (2022)
- A. Neogi, R. Janisch. Unravelling the lamellar size-dependent fracture behavior of fully lamellar intermetallic γ -TiAl. Acta Materialia, 227, 117698, (2022)
- A. Biswas, S. Kalidindi, A. Hartmaier. A hybrid approach for the efficient computation of polycrystalline yield loci with the accuracy of the crystal plasticity finite element method. Modelling and Simulation in Materials Science and Engineering, 30, 025015, (2022)
- A. Azócar Guzmán. Ab initio study of co-segregation effects of H and C at grain boundaries in ferritic steels. PhD Thesis, Ruhr-Universität Bochum, (2022)
- H. Wang. Computational study of hemodynamic changes associated with morphology, deformability and degradation of blood vessels. PhD Thesis, Ruhr-Universität Bochum, Max-Planck-Institut für Eisenforschung, (2022)
- Y. Schneider, U. Weber, Ch. Xu et al. Experimental and numerical investigations of micro-meso damage evolution for a WC/Co-type tool material. Materialia, 21, 101343, (2022)
- Z. Hamzeh. Finite element modelling of the influence of porosity in indentation tests. Master Thesis, Ruhr-Universität Bochum, (2022)
- I. Gordeev, L. Kolotova, S. Starikov. Formation of metastable aluminum silicide as intermediate stage of Al-Si alloy crystallization. Scripta Materialia, 210, 114481, (2022)
- M. M. Matsuo. Hybrid FEM-ML in open die forging process. Master Thesis, Ruhr-Universität Bochum, (2022)
- U. Nwachukwu, A. Obaied, O. Horst et al. Microstructure property classification of Nickel-based Superalloys using Deep Learning. Modelling and Simulation in Materials Science and Engineering, 30, 025009, (2022)
- P. Thome, M. Schneider, V. Yardley et al. Crystallographic analysis of plate and lath martensite in Fe-Ni Alloys. Crystals, 12, 156, (2022)
- A. Grünebohm, M. Marathe, R. Khachaturyan et al. Interplay of domain structure and phase transitions: theory, experiment and functionality. Journal of Physics: Condensed Matter, 34, 073002, (2022)
- D. Zuo, Y. He, S. Avril et al. A thermodynamic framework for unified continuum models for the healing of damaged soft biological tissue. Journal of the Mechanics and Physics of Solids, 158, 104662, (2022)
- T. Hammerschmidt, J. Rogal, E. Bitzek et al. Atomic-scale modeling of superalloys. Nickel base single crystals across length scales, 341-360, (2022)
- S. Li, N. Vajragupta, A. Biswas et al. Effect of microstructure heterogeneity on the mechanical properties of friction stir welded reduced activation ferritic/martensitic steel. Scripta Materialia, 207, 114306, (2022)
- A. Bochkarev, Y. Lysogorskiy, S. Menon et al. Efficient parametrization of the atomic cluster expansion. Physical Review Materials, 6, 013804, (2022)
- H. Li, X. Wang, J. Zhang et al. Experimental investigation of laser surface texturing and related biocompatibility of pure titanium. The International Journal of Advanced Manufacturing Technology, 119, 5993–6005, (2022)
- V. Vardanyan. Molecular dynamics modeling of machining processes of composite materials. PhD Thesis, University of Kaiserslautern, (2022)
- M. Bruns, F. Varnik. Rejuvenation in deep thermal cycling of a generic model glass: a study of per-particle energy distribution. Materials, 15, 829, (2022)
- L. Heep, D. Bürger, C. Bonnekoh et al. The effect of deviations from precise [001] tensile direction on creep of Ni-base single crystal superalloys. Scripta Materialia, 207, 114274, (2022)
- M. Schröter, H. C. Herper, A. Grünebohm. Tuning the magnetic phase diagram of Ni-Mn-Ga by Cr and Co substitution. Journal of Physics D: Applied Physics, 55, 025002, (2022)
2021
- H. Schaar, I. Steinbach, M. Tegeler. Numerical study of epitaxial growth after partial remelting during selective electron beam melting in the context of Ni–Al. Metals, 11, 2012, (2021)
- H. Wang, D. Balzani, V. Vedula et al. On the potential self-amplification of aneurysms due to tissue degradation and blood flow revealed from FSI simulations. Frontiers in Physiology, 12, 785780, (2021)
- A. Obaied, F. Tang, I. Roslyakova et al. ‘‘2 1/2th’’ generation Calphad databases: Extrapolating heat capacities of elements and compounds to 0K. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 75, 102352, (2021)
- M. Grabowski. Atomistic simulations of vacancy mobility in the γ–phase of Ni-based superalloys. PhD Thesis, Ruhr-Universität Bochum, (2021)
- H. Wang, T. Krüger, F. Varnik. Geometry and flow properties affect the phase shift between pressure and shear stress waves in blood vessels. Fluids, 6, 378, (2021)
- M. Shahmardani Firouzjah, N. Vajragupta, A. Hartmaier. Influence of crystal plasticity parameters on the strain hardening behavior of polycrystals. Crystals, 11, 1473, (2021)
- Y. A. Genenko, M.-H. Zhang, I. S. Vorotiahin et al. Multistep stochastic mechanism of polarization reversal in orthorhombic ferroelectrics. Physical Review B, 104, 184106, (2021)
- F. Frankus. Numerical investigation on the modalities of hydrogen-assisted crack growth in DCB specimen. Master Thesis, Ruhr-Universität Bochum, (2021)
- Y. Chiang. Prediction of anisotropic behavior for porous 316L stainless steel by machine learning methods. Master Thesis, Ruhr-Universität Bochum, (2021)
- E. Fedorov. Accelerated force field development using active learning: the case of advanced electrolytes for Li-ion batteries. Master Thesis, Ruhr-Universität Bochum, (2021)
- S. Menon, Y. Lysogorskiy, J. Rogal et al. Automated free-energy calculation from atomistic simulations. Physical Review Materials, 5, 103801, (2021)
- M. Shahmardani Firouzjah, A. Hartmaier. Constitutive modeling of cyclic plasticity at elevated temperatures for a nickel-based superalloy. International Journal of Fatigue, 151, 106353, (2021)
- S. Kumtamukkula. Exploring deep generative modeling approaches with 2D to 3D polycrystalline icrostructures generation. Master Thesis, Ruhr-Univerisität Bochum, (2021)
- M. Alam, L. Zhao, N. Vajragupta et al. Finite element modeling of brittle and ductile modes in cutting of 3C-SiC. Crystals, 11, 1286, (2021)
- I. Sravani Dandu. Identification of mechanical properties from incremental indentation test. Master Thesis, Ruhr-Universität Bochum, (2021)
- D. El Lahib. Verdichterschaufeln aus faserverstärktem Kunststoff für Turbomaschinen. Bachelor Thesis, Ruhr-Univerisität Bochum, (2021)
- F. Scholz, M. Cevik, P. Hallensleben et al. A 3D analysis of dendritic solidification and mosaicity in Ni-based single crystal superalloys. Materials, 14, 4904, (2021)
- A. Oswal. Design and development of complex stressed polymer-metal hybrid structures. Master Thesis, TU Dortmund, (2021)
- N. Volz, F. Xue, A. Bezold et al. Design of a Co–Al–W–Ta alloy series with varying γ′ volume fraction and their thermophysical properties. Metallurgical and Materials Transactions A, 52, 3931–3944, (2021)
- D. Gunasegaram, I. Steinbach. Modelling of microstructure formation in metal additive manufacturing: recent progress, research gaps and perspectives. Metals, 11, 1425, (2021)
- A. Chauniyal, G. Dehm, R. Janisch. On the role of pre-existing defects in influencing hardness in nanoscale indentations — insights from atomistic simulations. Journal of Mechanics and Physics of Solids, 154, 104511, (2021)
- S. Starikov, D. Smirnova. Optimized interatomic potential for atomistic simulation of Zr-Nb alloy. Computational Materials Science, 197, 110581, (2021)
- Y. Lee. Prediciton of the load-path dependent bahavior of a polycrystalline material by micromechanical modeling. Master Thesis, Ruhr-Universität Bochum, (2021)
- L. Romaner, T. Pradhan, A. Kholtobina et al. Theoretical investigation of the 70.5 mixed dislocations in body-centered cubic transition metals. Acta Materialia, 217, 117154, (2021)
- M. Rinaldi, M. Mrovec, M. Fähnle et al. Determination of spin-wave stiffness in the Fe-Si system using first-principles calculations. Physical Review B, 104, 064413, (2021)
- A. Neogi, H. Askari, N. Abdolrahim. Elastic and plastic deformation behavior of helium nano-bubbled single crystal copper: an atomistic simulation study. Journal of Nuclear Materials, 552, 152988, (2021)
- N. Volz, F. Xue, C. H. Zenk et al. Understanding creep of a single-crystalline Co-Al-W-Ta superalloy by studying the deformation mechanism, segregation tendency and stacking fault energy. Acta Materialia, 214, 117019, (2021)
- P. Stoyanov, R. Merz, M. Stricker et al. Achieving ultra-low friction with diamond/metal systems in extreme environments. Materials, 14, 3791, (2021)
- A. Paiva do Nascimento. An optimized method to determine advanced yield surface initial parameters for sheet metal forming applications. Master Thesis, Ruhr-Univerisität Bochum, (2021)
- O. Aliyev. Analyse des Dämpfungsverhaltens von faserverstärkten Polymermatrix-Verbundwerkstoffen mit Hilfe der Finite-Elemente-Methode. Bachelor Thesis, Ruhr-Universität Bochum, (2021)
- K. Abrahams, S. Zomorodpoosh, A. Riyahi khorasgani et al. Automated assessment of a kinetic database for fcc Co-Cr-Fe-Mn-Ni high entropy alloys. Modelling and Simulation in Materials Science and Engineering, 29, 055007, (2021)
- M. Ahmed, O. Horst, A. Obaied et al. Automated image analysis for quantification of materials microstructure evolution. Modelling and Simulation in Materials Science and Engineering, 29, 055012, (2021)
- A. Chauniyal. Deformation behavior of lamellar TiAl alloys – an atomistic study. PhD Thesis, Ruhr-Universität Bochum, (2021)
- Y. Schneider, R. Zielke, C. Xu et al. Experimental investigations of micro-meso damage evolution for a Co/WC-type tool material with application of digital image correlation and machine learning. Materials, 14, 3562, (2021)
- J. Schmidt. Prediction of Yld2004-18p anisotropic coefficients using ML methods. Master Thesis, Ruhr-Universität Bochum, (2021)
- A. Neogi, R. Janisch. Twin-boundary assisted crack tip plasticity and toughening in lamellar γ -TiAl. Acta Materialia, 213, 116924, (2021)
- S. Starikov, D. Smirnova, T. Pradhan et al. Angular-dependent interatomic potential for large-scale atomistic simulation of iron: development and comprehensive comparison with existing interatomic models. Physical Review Materials, 5, 063607, (2021)
- A. Ferrari, Y. Lysogorskiy, R. Drautz. Design of refractory compositionally complex alloys with optimal mechanical properties. Physical Review Materials, 5, 063606, (2021)
- A. Schratt, I. Steinbach, V. Mohles. Grain boundary energy landscape from the shape analysis of synthetically stabilized embedded grains. Computational Materials Science, 193, 110384, (2021)
- A. Paulsen, H. Dumlu, D. Piorunek et al. Laboratory-scale processing and performance assessment of Ti–Ta high-temperature shape memory spring actuators. Shape Memory and Superelasticity, 7, 222–234, (2021)
- Y. Lysogorskiy, C. van der Oord, A. Bochkarev et al. Performant implementation of the atomic cluster expansion (PACE) and application to copper and silicon. npj Computational Materials, 7, 97, (2021)
- F. Habiyaremye, A. Guitton, F. Schäfer et al. Plasticity induced by nanoindentation in a CrCoNi medium-entropy alloy studied by accurate electron channeling contrast imaging revealing dislocation-low angle grain boundary interactions. Materials Science and Engineering: A, 817, 141364, (2021)
- E. Tamsen, D. Balzani, B. Tas Kavakbasi. A general, implicit, finite-strain FE2 framework for the simulation of dynamic problems on two scales. Computational Mechanics, 67, 1375–1394, (2021)
- P. Metsch, R. Schiedung, I. Steinbach et al. Benchmark for the coupled magneto-mechanical boundary value problem in magneto-active elastomers. Materials, 14, 2380, (2021)
- D. Tian, Z. Xu, L. Liu et al. In situ investigation of nanometric cutting of 3C-SiC using scanning electron microscope. The International Journal of Advanced Manufacturing Technology, 115, 2299–2312, (2021)
- M. Ramaswamy Guru Prasad, A. Neogi, N. Vajragupta et al. Influence of temperature on void collapse in single crystal nickel under hydrostatic compression. Materials, 14, 2369, (2021)
- S. Syubaev, E. Mitsai, S. Starikov et al. Laser-printed hemispherical silicon Mie resonators. Optics Letters, 46, 2304-2307, (2021)
- J. Kundin, I. Steinbach, K. Abrahams et al. Pair-exchange diffusion model for multicomponent alloys revisited. Materialia, 16, 101047, (2021)
- S. Li, X. Yang, N. Vajragupta et al. The influence of post-weld tempering temperatures on microstructure and strength in the stir zone of friction stir welded reduced activation ferritic/martensitic steel. Materials Science and Engineering: A, 814, 141224, (2021)
- S. Motaman, C. Haase. The microstructural effects on the mechanical response of polycrystals: a comparative experimental-numerical study on conventionally and additively manufactured metallic materials. International Journal of Plasticity, 140, 102941, (2021)
- A. Gupta, B. Tas, D. Korbmacher et al. A combined experimental and first-principles based assessment of finite-temperature thermodynamic properties of intermetallic Al3Sc. Materials, 14, 1837, (2021)
- J. Wu, W. Liu, N. Vajragupta et al. A numerical investigation on the effects of porosity on the plastic anisotropy of additive manufactured stainless steel with various crystallographic textures. ESAFORM 2021, (2021)
- Y. Schneider, W. Wasserbäch, S. Schmauder et al. A numerical method to improve the representativeness of real microstructure cut-outs applied in finite element simulations. Crystals, 11, 382, (2021)
- S. Hurain. Anisotropic grain growth in ceramics in presence of grain boundary segregations. Master Thesis, Ruhr-Universität Bochum, (2021)
- P. Maffettone, L. Banko, P. Cui et al. Crystallography companion agent for high-throughput materials discovery. Nature Computational Science, 1, 290-297, (2021)
- S. Lu, J. Zhang, Z. Li et al. Cutting path-dependent machinability of SiCp/Al composite under multi-step ultra-precision diamond cutting. Chinese Journal of Aeronautics, 34, 241-252, (2021)
- J. Kundin, H. Farhandi, K. Ganesan et al. Phase-field modeling of grain growth in presence of grain boundary diffusion and segregation in ceramic matrix mini-composites. Computational Materials Science, 190, 110295, (2021)
- A. Tiwari. Thermal stress calculation of SPS coatings by FEM analysis. Master Thesis, Ruhr-Universität Bochum, (2021)
- O. Horst, D. Schmitz, J. Schreuer et al. Thermoelastic properties and γ’-solvus temperatures of single-crystal Ni-base superalloys. Journal of Materials Science, 56, 7637–7658, (2021)
- B. Medghalchi. Concentration-dependent finite temperature effects in metallic alloys. Master Thesis, Ruhr-Universität Bochum, (2021)
- M. Bruns, M. Hassani, F. Varnik et al. Decelerated aging in metallic glasses by low temperature thermal cycling. Physical Review Research, 3, 013234, (2021)
- D. Piorunek, O. Oluwaseyi, J. Frenzel et al. Effect of off-stoichiometric compositions on microstructures and phase transformation behavior in Ni-Cu-Pd-Ti-Zr-Hf high entropy shape memory alloys. Journal of Alloys and Compounds, 857, 157467, (2021)
- F. Musil, M. Veit, A. Goscinski et al. Efficient implementation of atom-density representations. The Journal of Chemical Physics, 154, 114109, (2021)
- X. Zhang, B. Mao, L. Mushongera et al. Laser powder bed fusion of titanium aluminides: an investigation on site-specific microstructure evolution mechanism. Materials & Design, 201, 109501, (2021)
- S. Vakili. Multi-Phase-Field modelling of structure formation in metallic foams. PhD Thesis, Ruhr-Universität Bochum, Max-Planck-Institut für Eisenforschung, (2021)
- T. Muslubas. Optimierung der mechanischen Belastbarkeit von Überspannungsableitern im GFK-Kreuzwickeldesign. Bachelor Thesis, Ruhr-Univerisität Bochum, (2021)
- S. Sidrah. Scale-sensitive modeling of fracture and brittle-to-ductile transition in visco-plastic materials. Master Thesis, Ruhr-Universität Bochum, (2021)
- H. Dumlu, A. Marquardt, E. Mahmoudinezhad Zirdehi et al. A mechanical analysis of chemically stimulated linear shape memory polymer actuation. Materials, 14, 481, (2021)
- W. Hu. Generative deep neural networks for x-ray diffractograms decomposition. Master Thesis, Ruhr-Universität Bochum, (2021)
- V. Lenz. Implementierung und Evaluation einer intuitiven Benutzeroberfläche für komplexes High-Performance Computing. Bachelor Thesis, Fernuniversität Hagen, (2021)
- R. Srinivas Varanasi. Mechanismsm of refinement and deformation of novel ultrafine-grained medium manganese steels with improved mechanical properties. PhD Thesis, Ruhr-Universität Bochum, (2021)
- M. Ramaswamy Guru Prasad. Microstructure-sensitive modeling of mechanical behavior of polycrystalline metals and superalloys. PhD Thesis, Ruhr-Universität Bochum, (2021)
- S. Farzaneh Kalourazi. Python based automated data correlation on aluminum cast alloys. Master Thesis, Ruhr-Universität Bochum, (2021)
- J. Jenke, A. Ladines, T. Hammerschmidt et al. Tight-binding bond parameters for dimers across the periodic table from density-functional theory. Physical Review Materials, 5, 023801, (2021)
- L. Zhao, J. Zhang, J. Zhang et al. Atomistic investigation of machinability of monocrystalline 3C–SiC in elliptical vibration-assisted diamond cutting. Ceramics International, 47, 2358-2366, (2021)
- J. Jeon. Crystal structure and mechanical properties of Cr-rich hard phases of type M7C3 in Fe-based alloys - simulation and experimental validation. Master Thesis, Ruhr-Universität Bochum, (2021)
- V. Khalili, J. Frenzel, G. Eggeler. Degradation behavior of the MgO/HA surface ceramic nano-composites in the simulated body fluid and its use as a potential bone implant. Materials Chemistry and Physics, 258, 123965, (2021)
- L. Zhao, J. Zhang, J. Pfetzing et al. Depth-sensing ductile and brittle deformation in 3C-SiC under Berkovich nanoindentation. Materials & Design, 197, 109223, (2021)
- L. Heep, C. Schwalbe, C. Heinze et al. Dislocation networks in gamma/gamma’-microstructures formed during selective laser melting of a Ni-base superalloy. Scripta Materialia, 190, 121–125, (2021)
- J. He, L. Cao, S. Makineni et al. Effect of interface dislocations on mass flow during high temperature and low stress creep of single crystal Ni-base superalloys. Scripta Materialia, 191, 23–28, (2021)
- M. Hassan. Influence of W-concentration on creep-behavior and phase stability in polycrystalline Ni-based superalloys. Master Thesis, Ruhr-Universität Bochum, (2021)
- J. Wu, Z. Wu, L. Liu et al. MD simulation study on defect evolution and doping efficiency of p-type doping of 3C-SiC by Al ion implantation with subsequent annealing. Journal of Materials Chemistry C, 7, 2258-2275, (2021)
- S. Iseni, M. Ramaswamy Guru Prasad, A. Hartmaier et al. Micro-, macromechanical and aeroelastic investigation of glass-fiber based, lightweight turbomachinery components. Asme Turbo Expo 2020: Power for land, sea and air, 10A Structures and Dynamics, (2021)
- E. Mahmoudinezhad Zirdehi, H. Dumlu, G. Eggeler et al. On the size effect of additives in amorphous shape memory polymers. Materials, 14, 327, (2021)
- E. Zirdehi, H. Dumlu, G. Eggeler et al. On the size effect of additives in amorphous shape memory polymers. Materials, 14, 327, (2021)
- T. Kalfhaus, H. Schaar, F. Thaler et al. Path to single-crystalline repair and manufacture of Ni-based superalloy using directional annealing. Surface and Coatings Technology, 405, 126494, (2021)
- H. Wang, S. Botti, M. Marques. Predicting stable crystalline compounds using chemical similarity. npj Computational Materials, 7, 12, (2021)
- V. Khalili, S. Moslemi, B. Ruttert et al. Surface metal matrix nano-composite of magnesium/hydroxyapatite produced by stir-centrifugal casting. Surface and Coatings Technology, 406, 126654, (2021)
2020
- A. Azócar Guzmán, J. Jeon, A. Hartmaier et al. Hydrogen embrittlement at cleavage planes and grain boundaries in bcc iron—revisiting the first-principles cohesive zone model. Materials, 13, 5785, (2020)
- M. Ramaswamy Guru Prasad, S. Gao, N. Vajragupta et al. Influence of trapped gas on pore healing under hot isostatic pressing in nickel-base superalloys. Crystals, 10, 1147, (2020)
- W. Amin. Micromechanical modeling of metals using strain gradient crystal plsticity-coupled phase field model. PhD Thesis, Ruhr-Universität Bochum, (2020)
- P. Ståhle, M. Shahmardani Firouzjah, S. Kao-Walter. On buckling and fracture of thin elastic-plastic foils. Procedia Structural Integrity, 28, 2065-2071, (2020)
- Z. Wang, J. Zhang, A. Ma et al. On the crystallographic anisotropy of plastic zone size in single crystalline copper under Berkovich nanoindentation. Materials Today Communications, 25, 101314, (2020)
- Z. Wang, J. Zhang, A. Ma et al. On the crystallographic anisotropy of plastic zone size in single crystalline copper under Berkovich nanoindentation. Materials Today Communications, 25, 101314, (2020)
- J. Kundin, R. S. M. Almeida, H. Salama et al. Phase-field simulation of abnormal anisotropic grain growth in polycrystalline ceramic fibers. Computational Materials Science, 185, 109926, (2020)
- M. Stricker, W. A. Curtin. Prismatic slip in Magnesium. Journal of Physical Chemistry C, 124, 27230-27240, (2020)
- S. Zomorodpoosh, B. Bocklund, A. Obaied et al. Statistical approach for automated weighting of datasets: application to heat capacity data. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 71, 101994, (2020)
- Q. Ali. Ab initio informed Monte Carlo simulation for magnetic and thermodynamic properties of rare earth based alloys. Master Thesis, Ruhr-Universität Bochum, (2020)
- M. Fathidoost. Accelerated exploration of microstructure-property-relation in composites via feature-based and voxel-based machine learning techniques. Master Thesis, Ruhr-Universität Bochum, (2020)
- A. Grünebohm, M. Marathe. Impact of domains on the orthorhombic-tetragonal transition of BaTiO3: an ab initio study. Physical Review Materials, 4, 114417, (2020)
- S. Vakili, I. Steinbach, F. Varnik. Multi‑phase‑field simulation of microstructure evolution in metallic foams. Scientific Reports, 10, 19987, (2020)
- S. Starikov, I. Gordeev, Y. Lysogorskiy et al. Optimized interatomic potential for study of structure and phase transitions in Si-Au and Si-Al systems. Computational Materials Science, 184, 109891, (2020)
- E. Norouzi. Analysis and application of machine learning approaches to identify parameters of a visco-plastic material model based on numerical and experimental data of copper. Master Thesis, Ruhr-Universität Bochum, (2020)
- E. Norouzi. Analysis and application of machine learning aproaches to identify parameters of a visco-plastic material model based on numerical and experimental data of copper. Master Thesis, Ruhr-Universität Bochum, (2020)
- O. Hedge, M. Grabowski, X. Zhang et al. Atomic relaxation around defects in magnetically disordered materials computed by atomic spin constraints within an efficient Lagrange formalism. Physical Review B, 102, 144101, (2020)
- M. A. Korneva, S. Starikov, A. P. Zhilyaev et al. Atomistic modeling of grain boundary migration in nickel. Advanced Engineering Materials, 22, 2000115, (2020)
- S. Mirgilani. Evaluation of the influence of material thickness on the relevant parameters for the generation of FEM material cards. Master Thesis, Ruhr Universität Bochum, (2020)
- A. Chauniyal, R. Janisch. Influence of lattice misfit on the deformation behaviour of α2/γ lamellae in TiAl alloys. Materials Science and Engineering: A, 796, 140053, (2020)
- M. Stricker, B. Yin, E. Mak et al. Machine learning for metallurgy II. A neural-network potential for magnesium. Physical Review Materials, 4, 103602, (2020)
- E. Mahmoudinezhad Zirdehi. Shape memory polymers and effects of chemo-mechanical coupling: a molecular dynamic study. PhD Thesis, Ruhr Universität Bochum, (2020)
- Y. Schneider, U. Weber, W. Wasserbäch et al. A numerical method for the generation of hierarchical Poisson Voronoi microstructures applied in micromechanical finite element simulations—part I: method. Computational Mechanics, 66, 651–667, (2020)
- A. Neogi, M. Alam, A. Hartmaier et al. Anisotropic failure behavior of ordered intermetallic TiAl alloys under pure mode-I loading. Modelling and Simulation in Materials Science and Engineering, 28, 065016, (2020)
- A. Schratt, V. Mohles. Efficient calculation of the ECO driving force for atomistic simulations of grain boundary motion. Computational Materials Science, 182, 109774, (2020)
- R. Drautz. From electrons to interatomic potentials for materials simulations. Topology, Entanglement, and Strong Correlations Modeling and Simulation, 10, Chapter 3, (2020)
- A. Biswas. Micromechanical modeling of mechanical behavior of additively manufactured components. PhD Thesis, Ruhr-Universität Bochum, (2020)
- S. Menon, G. Díaz Leines, R. Drautz et al. Role of pre-ordered liquid in the selection mechanism of crystal polymorphs during nucleation. The Journal of Chemical Physics, 153, 104508, (2020)
- R. Schiedung, M. Tegeler, D. Medvedev et al. Simulation of capillary-driven kinetics with multi-phase-field and lattice Boltzmann method. Modelling and Simulation in Materials Science and Engineering, 28, 065008, (2020)
- C. Bonnekoh, J. Reiser, A. Hartmaier et al. The brittle-to-ductile transition in cold-rolled tungsten sheets: the rate-limiting mechanism of plasticity controlling the BDT in ultrafine-grained tungsten. Journal of Materials Science, 55, 12314–12337, (2020)
- A. Biswas. Ab initio simulations of (Ba, Sr)TiO3 solid solutions. Master Thesis, Ruhr-Universität Bochum, (2020)
- D. Ivanova. Atomistic modelling of the interface between fcc and σ phases. Master Thesis, Ruhr-Universität Bochum, (2020)
- S. Amariamir. Combining active and transfer learning for data-guided search of new materials. Master Thesis, Ruhr-Universität Bochum, (2020)
- H. Sajjad. Constitutive modeling of cyclic plasticity and parameter assessment by inverse methods. PhD Thesis, Ruhr-Universität Bochum, (2020)
- S. Tumminello, M. Palumbo, J. Koßmann et al. DFT-CEF approach for the thermodynamic properties and volume of stable and metastable Al–Ni compounds. Metals, 10, 1142, (2020)
- M. Ali, I. Lopez-Galilea, W. Amin et al. Effect of γ′ precipitate size on hardness and creep properties of Ni-base single crystal superalloys: experiment and simulation. Materialia, 12, 100692, (2020)
- M. Ramaswamy Guru Prasad, A. Biswas, W. Amin et al. Influence of pore characteristics on anisotropic mechanical behavior of L‐PBF manufactured metal by micromechanical modeling. Advanced Engineering Materials, 2000641, (2020)
- A. Saxena. Machine learning the formation of defect phases in aluminium alloys. Master Thesis, Ruhr-Universität Bochum, (2020)
- X. Zhang, H. Wang, T. Hickel et al. Mechanism of collective interstitial ordering in Fe-C alloys. Nature Materials, 19, 849-854, (2020)
- Y. A. Genenko, R. Khachaturyan, I. S. Vorotiahin et al. Multistep stochastic mechanism of polarization reversal in rhombohedral ferroelectrics. Physical Review B, 102, 064107, (2020)
- P. Ghaemmaghamifardaraghi. Phase stability in Al16 G21-x Fe21 Co21 Ni21 Mox compositionally complex alloys. Master Thesis, Ruhr-Universität Bochum, (2020)
- U. Rehman. The effect of Vanadium on the microstructure and mechanical properties of micro-alloyed steel. Master Thesis, Ruhr-Universität Bochum, (2020)
- Aslam Ahmed. Thermodynamics of binary alloys at atomistic scale. Master Thesis, Ruhr-Universität Bochum, (2020)
- S. Zomorodpoosh, N. Volz, S. Neumeier et al. Application of change-point analysis to the selection of representative data in creep experiments. Journal of Physics Communications, 4, 075024, (2020)
- R. Drautz. Atomic cluster expansion of scalar, vectorial, and tensorial properties including magnetism and charge transfer. Physical Review B, 102, 024104, (2020)
- H. Sajjad, H. Hassan, M. Kuntz et al. Inverse method to determine fatigue properties of materials by combining cyclic indentation and numerical simulation. Materials, Special Issue Recent Advances in Mechanisms of Fracture and Fatigue, 13, 3126, (2020)
- M. Ahmed. Machine learning based prediction and optimization of mechanical properties in industrial manufacturing of steel. Master Thesis, Ruhr-Univesität Bochum, (2020)
- B. Schaefer. Micromechanical modelling of fatigue crack initiation in the martensitic high-strength steel SAE 4150. PhD Thesis, Ruhr-Universität Bochum, (2020)
- A. Ezeabasili. The influence of bond coat (BC) surface characteristics on the lifetime of thermal barrier coatings (TBCs). Master Thesis, Ruhr-Universität Bochum, (2020)
- L. Zhao, M. Alam, J. Zhang et al. Amorphization-governed elasto-plastic deformation under nanoindentation in cubic (3C) silicon carbide. Ceramics International, 46, 12470–12479, (2020)
- Z. Wang, J. Zhang, G. Li et al. Anisotropy‑related machining characteristics in ultra‑precision diamond cutting of crystalline copper. Nanomanufacturing and Metrology, 3, 123–132, (2020)
- M. Uddagiri, S. Hubig, J. Spee et al. Columnar-equiaxed transition in continuous casting based on a micromacro solidification model with long-range solutal mixing. IOP conference series: Materials science and engineering, 861, 012014, (2020)
- S. Pemma. Detection of hydrogen in Ti/Mo carbides of steels: an atom probe study combined with atomistic simulation. Master Thesis, Ruhr Universität Bochum, (2020)
- K. Abrahams. From atomic mobilities to multi-component interdiffusion simulations in solids: model development and automated data assessment. PhD Thesis, Ruhr Universität Bochum, (2020)
- Y. Liang, G. Díaz Leines, R. Drautz et al. Identification of a multi-dimensional reaction coordinate for crystal nucleation in Ni3Al. The Journal of Chemical Physics, 152, 224504, (2020)
- E. van der Giessen, P. A. Schultz, N. Bertin et al. Roadmap on multiscale materials modeling. Modelling and Simulation in Materials Science and Engineering, 28, 043001, (2020)
- Y. Tang, Y. Li, W. Zhao et al. Thermodynamic descriptions of quaternary Mg-Al-Zn-Bi system supported by experiments and their application in descriptions of solidification behavior in Bi-additional AZ casting alloys. Journal of Magnesium and Alloys, (2020)
- A. Obaied, B. Bocklund, S. Zomorodpoosh et al. Thermodynamic re-assessment of pure chromium using modified segmented regression model. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 69, 101762, (2020)
- S. Starikov, V. Tseplyaev. Two-scale simulation of plasticity in molybdenum: combination of atomistic simulation and dislocation dynamics with non-linear mobility function. Computational Materials Science, 179, 109585, (2020)
- M. Ali, W. Amin, O. Shchyglo et al. 45-degree rafting in Ni-based superalloys: a combined phase-field and strain gradient crystal plasticity study. International Journal of Plasticity, 128, 102659, (2020)
- F. Okoro. Atomistic diffusion processes in Ni-based superalloys - model systems with up to four components. Master Thesis, Ruhr-Universität Bochum, (2020)
- Z. Wang, J. Zhang, Z. Xu et al. Crystal anisotropy-dependent shear angle variation in orthogonal cutting of single crystalline copper. Precision Engineering, 63, 41-48, (2020)
- A. Biswas, M. Ramaswamy Guru Prasad, N. Vajragupta et al. Effect of grain statistics on micromechanical modeling: the example of additively manufactured materials examined by electron backscatter diffraction. Advanced Engineering Materials, 22, 1901416, (2020)
- D. Naujoks, M. Schneider, S. Salomon et al. Experimental and theoretical investigation on phase formation and mechanical properties in Cr-Co-Ni alloys processed using a novel thin-film quenching technique. ACS Combinatorial Science, 22, 232-247, (2020)
- M. Stratmann. Intergrated phase-field model with redistributation and long-range diffusion on sublattices. PhD Thesis, Ruhr-Univesität Bochum, (2020)
- A. Y. Zhizhchenko, P. Tonkaev, D. Gets et al. Light-emitting nanophotonic designs enabled by ultrafast laser processing of halide perovskites. Small, 16, 2000410, (2020)
- C. L. M. Alves, J. Rezende, D. Senk et al. Phase-field simulation of peritectic steels solidification with transformation-induced elastic effect. Journal of Materials Research and Technology, 9, 3805-3816, (2020)
- H. Schaar. Simulation of solidification on the macro- and microscale in context of Ni-based superalloys. PhD Thesis, Ruhr-Univesität Bochum, (2020)
- V. Mohles. 3-D front tracking model for interfaces with anisotropic energy. Computational Materials Science, 176, 109534, (2020)
- A. Hartmaier. Data-oriented constitutive modeling of plasticity in metals. Materials, 13, 1600, (2020)
- R. Halver, J. H. Meinke, G. Sutmann. Kokkos implementation of an Ewald Coulomb solver and analysis of performance portability. Journal of Parallel and Distributed Computing, 138, 48-54, (2020)
- N. Vajragupta, S. Maassen, T. Clausmeyer et al. Micromechanical modeling of DP600 steel: from microstructure to the sheet metal forming process. Procedia Manufacturing, 47, 1540-1547, (2020)
- E. Mahmoudinezhad Zirdehi, T. Voigtmann, F. Varnik. Multiple character of non-monotonic size-dependence for relaxation dynamics in polymer-particle and binary mixtures. Journal of Physics - Condensed Matter, 32, 275104, (2020)
- L.-F. Zhu, F. Körmann, A. V. Ruban et al. Performance of the standard exchange-correlation functionals in predicting melting properties fully from first principles: application to Al and magnetic Ni. Physical Review B, 101, 144108, (2020)
- H. Salama, J. Kundin, O. Shchyglo et al. Role of inclination dependence of grain boundary energy on the microstructure evolution during grain growth. Acta Materialia, 188, 641-651, (2020)
- S. Starikov, M. Mrovec, R. Drautz. Study of grain boundary self-diffusion in iron with different atomistic models. Acta Materialia, 188, 560-569, (2020)
- N. Paulson, S. Zomorodpoosh, I. Roslyakova et al. Comparison of statistically-based methods for automated weighting of experimental data in CALPHAD-type assessment. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 68, 101728, (2020)
- R. Halver, J. Meinke, G. Sutmann. Examining performance portability with Kokkos for an Ewald sum Coulomb solver. Parallel Processing and Applied Mathematics, 12044, 35-45, (2020)
- A. Stamminger, B. Ziebarth, M. Mrovec et al. Fast diffusion mechanism in Li4P2S6 via a concerted process of interstitial Li ions. RSC Advances, 10, 10715-10722, (2020)
- H. Sözen, T. Hickel, J. Neugebauer. Impact of magnetism on the phase stability of rare-earth based hard magnetic materials. Calphad, 68, 101731, (2020)
- S. Gao, M. Ali, A. Hartmaier. Influence of rafted microstructures on creep in Ni-base single crystal superalloys: a 3D discrete dislocation dynamics study. Modelling and Simulation in Materials Science and Engineering, 28, 025001, (2020)
- R. Hubek, M. Seleznev, I. Binkowski et al. Intrinsic heterogeneity of shear banding: hints from diffusion and relaxation measurements of Co micro-alloyed PdNiP-based glass. Journal of Applied Physics, 127, 115109, (2020)
- L. Banko, Y. Lysogorskiy, D. Grochla et al. Predicting structure zone diagrams for thin film synthesis by generative machine learning. Communications Materials, 1, 15, (2020)
- P. Wang, T. Hammerschmidt, U. R. Kattner et al. Structural stability of Co–V intermetallic phases and thermodynamic description of the Co–V system. Calphad, 68, 101729, (2020)
- A. S. Everhardt, T. Denneulin, A. Grünebohm et al. Temperature-independent giant dielectric response in transitional BaTiO3 thin films. Applied Physics Reviews, 7, 011402, (2020)
- A. Ladines, T. Hammerschmidt, R. Drautz. BOPcat software package for the construction and testing of tight-binding models and bond-order potentials. Computational Materials Science, 173, 109455, (2020)
- J. Reiser, A. Hartmaier. Elucidating the dual role of grain boundaries as dislocation sources and obstacles and its impact on toughness and brittle-to-ductile transition. Scientific Reports, 10, 2739, (2020)
- A. Biswas, M. Ramaswamy Guru Prasad, N. Vajragupta et al. Kanapy: synthetic polycrystalline microstructure generator with geometry and texture. Zenodo Repository, (2020)
- Z. Xu, F. Fang, L. Liu et al. Nanocutting mechanism of 6H-SiC investigated by scanning electron microscope online observation and stress-assisted and ion implant-assisted approaches. The International Journal of Advanced Manufacturing Technology, 106, 3869–3880, (2020)
- A. Biswas, N. Vajragupta, R. Hielscher et al. Optimized reconstruction of the crystallographic orientation density function based on a reduced set of orientations. Journal of Applied Crystallography, 53, 178-187, (2020)
- J. Kundin, I. Steinbach. Quantum-phase-field: from the Broglie–Bohm double-solution program to doublon networks. Zeitschrift für Naturforschung, 75, 155-170, (2020)
- M. Shahmardani Firouzjah, N. Vajragupta, A. Hartmaier. Robust optimization scheme for inverse method for crystal plasticity model parametrization. Materials, 13, 735, (2020)
- M. Shoaib. Sustainable secondary packaging materials: tribology and wear. Master Thesis, Ruhr Universität Bochum, (2020)
- Z. Wang, J. Zhang, J. Zhang et al. Towards an understanding of grain boundary step in diamond cutting of polycrystalline copper. Journal of Materials Processing Technology, 276, 116400, (2020)
- N. Kusampudi. Using machine learning and data-driven approaches to predict damage initiation in dual-phase steel. Master Thesis, Ruhr-Universität Bochum, (2020)
- S. Schulz, G. Sutmann. A consistent boundary method for the material point method – using image particles to reduce boundary artefacts. Particles 2019, 522-533, (2020)
- M. Hassani, M. Bruns, F. Varnik. A crossover in spatio-temporal correlations of strain fluctuations in glass forming liquids. Journal of Statistical Mechanics: Theory and Experiment (JSTAT), 2020, 014002, (2020)
- M. Slapakova, A. Zendegani, C. Liebscher et al. Atomic scale configuration of planar defects in the Nb-rich C14 Laves phase NbFe2. Acta Materialia, 183, 362-376, (2020)
- D. Smirnova, S. Starikov, G. Díaz Leines et al. Atomistic description of self-diffusion in molybdenum: a comparative theoretical study of non-Arrhenius behavior. Physical Review Materials, 4, 013605, (2020)
- S. E. Restrepo, D. Di Stefano, M. Mrovec et al. Density functional theory calculations of iron - vanadium carbide interfaces and the effect of hydrogen. International Journal of Hydrogen Energy, 45, 2382-2389, (2020)
- K. P. Ganesan. Effect of grain boundary diffusion on the grain growth on ceramic matrix composites. Master Thesis, Ruhr-Univesität Bochum, (2020)
- H. Wang, T. Krüger, F. Varnik. Effects of size and elasticity on the relation between flow velocity and wall shear stress in side-wall aneurysms: A lattice Boltzmann-based computer simulation study. PLOS ONE, 15, e0227770, (2020)
- O. Mirzakhmedov. Inverse method for determining the flow curve of steels from indentation test. Master Thesis, Ruhr-Universität Bochum, (2020)
- A. O. Larin, A. Nominé, E. I. Ageev et al. Plasmonic nanosponges filled with silicon for enhanced white light emission. Nanoscale, 12, 1013-1021, (2020)
- M. Ali, J. V. Görler, I. Steinbach. Role of coherency loss on rafting behavior of Ni-based superalloys. Computational Materials Science, 171, 109279, (2020)
- A. Jana, S. Sridar, S. Fries et al. Thermodynamic modelling of the Ni–Zr system. Intermetallics, 116, 106640, (2020)
- S. Mu, R. J. Olsen, B. Dutta et al. Unfolding the complexity of phonon quasi-particle physics in disordered materials. npj Computational Materials, 6, 4, (2020)
2019
- I. Lopez-Galilea, B. Ruttert, J. He et al. Additive manufacturing of CMSX-4 Ni-base superalloy by selective laser melting: influence of processing parameters and heat treatment. Additive Manufacturing, 30, 100874, (2019)
- N. Wang. Atomistic modelling and simulations of magnetic transition metals. PhD Thesis, Ruhr-Univesität Bochum, (2019)
- A. Ferrari. Atomistic understanding and design of Ti-Ta-based shape memory alloys. PhD Thesis, Ruhr-Universität Bochum, (2019)
- J. Kundin, I. Steinbach. Comparative study of different anisotropy and potential formulations of phase-field models for dendritic solidification. Computational Materials Science, 170, 109197, (2019)
- R. Drautz. Erratum: Atomic cluster expansion for accurate and transferable interatomic potentials. Physical Review B, 100, 249901, (2019)
- S. Katnagallu, L. T. Stephenson, I. Mouton et al. Imaging individual solute atoms at crystalline imperfections in metals. New Journal of Physics, 21, 123020, (2019)
- A. Karami. Mathematical description and numerical estimation of aging behavior of high temperature PCB resins. Master Thesis, Ruhr Universität Bochum, (2019)
- J. Rogal, E. Schneider, M. Tuckerman. Neural-network-based path collective variables for enhanced sampling of phase transformations. Physical Review Letters, 123, 245701, (2019)
- D. Matschkal-Amberger, M. Kolb, S. Neumeier et al. New flat-punch indentation creep testing approach for characterizing the local creep properties at high temperatures. Materials & Design, 183, 108090, (2019)
- A. Ferrari, M. Schröder, Y. Lysogorskiy et al. Phase transitions in titanium with an analytic bond-order potential. Modelling and Simulation in Materials Science and Engineering, 27, 085008, (2019)
- Z. Wang, T. Sun, H. Zhang et al. The interaction between grain boundary and tool geometry in nanocutting of a bi-crystal copper. International Journal of Extreme Manufacturing, 1, 045001, (2019)
- J. Engels. An inverse analysis approach for parameterization of non-local crystal plasticity modeling using sphero-conical nanoindentation. PhD Thesis, Ruhr-Universität Bochum, (2019)
- R. Schiedung. Capillary driven effects in fluids and solids. PhD Thesis, Ruhr-Universität Bochum, (2019)
- C. Sutton, L. M. Ghiringhelli, T. Yamamoto et al. Crowd-sourcing materials-science challenges with the NOMAD 2018 Kaggle competition. npj Computational Materials, 5, 111, (2019)
- Y. Ikeda, I. Tanaka, J. Neugebauer et al. Impact of interstitial C on phase stability and stacking-fault energy of the CrMnFeCoNi high-entropy alloy. Physical Review Letters, 3, 113603, (2019)
- A. Stamminger, B. Ziebarth, M. Mrovec et al. Ionic conductivity and its dependence on structural disorder in halogenated argyrodites Li6PS5X (X = Br, Cl, I). Chemistry of Materials, 31, 8673-8678, (2019)
- M. Ramaswamy Guru Prasad, N. Vajragupta, A. Hartmaier. Kanapy: a Python package for generating complex synthetic polycrystalline microstructures. Journal of Open Source Software, 4, 1732, (2019)
- B. Schaefer, P. Sonnweber-Ribic, H. Hassan et al. Micromechanical modeling of fatigue crack nucleation around non-metallic inclusions in martensitic high-strength steels. Metals, 9, 1258, (2019)
- M. Hassani, A. Lagogianni, F. Varnik. Probing the degree of heterogeneity within a shear band of a model glass. Physical Review Letters, 123, 195502, (2019)
- S. Menon, G. Díaz Leines, J. Rogal. Pyscal: a Python module for structural analysis of atomic environments. Journal of Open Source Software, 4, 1824, (2019)
- A. Ferrari, A. Paulsen, D. Langenkämper et al. Discovery of omega-free high-temperature Ti-Ta-X shape memory alloys from first principles calculations. Physical Review Materials, 3, 103605, (2019)
- A. Ferrari, A. Paulsen, D. Langenkämper et al. Discovery of ω-free high-temperature Ti-Ta-X shape memory alloys from first-principles calculations. Physical Review Materials, 3, 103605, (2019)
- G. Sutmann. Multi-level load balancing for parallel particle simulations. Particles 2019, 80-92, (2019)
- M. Boeff, H. Hassan, A. Hartmaier. On the numerical modeling of nucleation and growth of microstructurally short cracks in polycrystals under cyclic loading. Journal of Materials Research, 34, 3523-3534, (2019)
- J. Engels, N. Vajragupta, A. Hartmaier. Parameterization of a non-local crystal plasticity model for tempered lath martensite using nanoindentation and inverse method. Frontiers in Materials, 6, 247, (2019)
- B. Schaefer, P. Sonnweber-Ribic, A. Hartmaier. Micromechanical modelling of the influence of strain ratio on fatigue crack initiation in a martensitic steel. Materials, 12, 2852, (2019)
- X. Huang, R. Janisch. Partitioning of interstitial segregants during decohesion: a DFT case study of the Σ3 symmetric tilt grain boundary in ferritic steel. Materials, 12, 2971, (2019)
- H. Hijar, R. Halver, G. Sutmann. Spontaneous fluctuations in mesoscopic simulations of nematic liquid crystals. Fluctuation and Noise Letters, 18, 1950011, (2019)
- W. Amin, M. Ali, N. Vajragupta et al. Studying grain boundary strengthening by dislocation-based strain gradient crystal plasticity coupled with a multi-phase-field model. Materials, 12, 2977, (2019)
- D. Sangiovanni, J. Klarbring, D. Smirnova et al. Superioniclike diffusion in an elemental crystal: bcc titanium. Physical Review Letters, 123, 105501, (2019)
- Y. Jiang, S. Zomorodpoosh, I. Roslyakova et al. Thermodynamic re-assessment of the binary Cr–Ta system down to 0 K. International Journal of Materials Research, 110, 797-807, (2019)
- C. Wang, M. Ali, S. Gao et al. Combined phase-field crystal plasticity simulation of P- and N-type rafting in Co-based superalloys. Acta Materialia, 175, 21-34, (2019)
- D. Reimann, K. Nidadavolu, H. Hassan et al. Modeling macroscopic material behavior with machine learning algorithms trained by micromechanical simulations. Frontiers in Materials, 6, 181, (2019)
- O. Shchyglo, G. Du, J. Engels et al. Phase-field simulation of martensite microstructure in low-carbon steel. Acta Materialia, 175, 415-425, (2019)
- Z. Wang, H. Zhang, Z. Li et al. Crystal plasticity finite element simulation and experiment investigation of nanoscratching of single crystalline copper. Wear, 430-431, 100-107, (2019)
- A. Biswas, M. R. G. Prasad, N. Vajragupta et al. Influence of microstructural features on the strain hardening behavior of additively manufactured metallic components. Advanced Engineering Materials, 21, 1900275, (2019)
- L. Liu, Z. Xu, D. Tian et al. MD simulation of stress-assisted nanometric cutting mechanism of 3C silicon carbide. Industrial Lubrication and Tribology, 71, 686-691, (2019)
- M. Hassani. Shear banding in amorphous solids: from correlations of local plastic deformation to percolating shear bands, a molecular dynamics study. PhD Thesis, Ruhr-Universität Bochum, (2019)
- A. Sutton, R. Drautz, V. Vitek. Biographical memoirs of fellows of the royal society. David Godfrey Pettifor. 9 March 1945—16 October 2017, 66, 20180038, (2019)
- B. Bocklund, R. Otis, A. Egorov et al. ESPEI for efficient thermodynamic database development, modification, and uncertainty quantification: application to Cu–Mg. MRS Communications: Artificial Intelligence Research Letter, 9, 618-627, (2019)
- S. Gao, Z. Yang, M. Grabowski et al. Influence of excess volumes induced by Re and W on dislocation motion and creep in Ni-base single crystal superalloys: a 3D discrete dislocation dynamics study. Metals, 9, 637, (2019)
- M. Uddagiri. Modeling of solidification microstructure to predict CET (columnar to equiaxed transition) in continuously cast steels. Modeling of Solidification Microstructure to Predict CET (Columnar to Equiaxed Transition) in Continuously Cast Steels, 1, 55, (2019)
- H. Sajjad, S. Hanke, Sedat Güler et al. Modelling cyclic behaviour of martensitic steel with J2 plasticity and crystal plasticity. Journal of Materials MDPI, 12, 1767, (2019)
- J. Janssen, S. Surendralal, Y. Lysogorskiy et al. Pyiron: an integrated development environment for computational materials science. Computational Materials Science, 163, 24-36, (2019)
- Y. Schneider, A. Bertram, T. Böhlke. Three-dimensional simulation of local and global behaviour of αFe-Cu composites under large plastic deformation. Technische Mechanik, 33, 34-51, (2019)
- K. Reuther, S. Hubig, I. Steinbach et al. Solute trapping in non-equilibrium solidification: a comparative model study. Materialia, 6, 100256, (2019)
- H. C. Wang, C. Somsen, Y. J. Li et al. Effect of Nb on improving the impact toughness of Mo-containing low-alloyed steels. Journal of Materials Science, 54, 7307–7321, (2019)
- S. Hubig, R. Schiedung, I. Steinbach. Thin interface limit for phase-field models of solidification with local mobility correction. arXiv:1905.02965 [physics], -, 13, (2019)
- J. Jenke. Automated parametrization and validation of simplified models of the interatomic interaction. PhD Thesis, Ruhr-Universität Bochum, (2019)
- J. Kundin, A. Ramazani, U. Prahl et al. Microstructure evolution of binary and multicomponent manganese steels during selective laser melting: phase-field modeling and experimental validation. Metallurgical and Materials Transactions A, 50, 2022-2040, (2019)
- T. Kalfhaus, M. Schneider, B. Ruttert et al. Repair of Ni-based single-crystal superalloys using vacuum plasma spray. Materials and Design, 168, 107656, (2019)
- C. Meid, M. Eggeler, P. Watermeyer et al. Stress-induced formation of TCP phases during high temperature low cycle fatigue loading of the single-crystal Ni-base superalloy ERBO/1. Acta Materialia, 168, 343-352, (2019)
- A. Subramanyam, A. Azócar Guzmán, S. Vincent et al. Ab initio study of the combined effects of alloying elements and H on grain boundary cohesion in ferritic steels. Metals, 9, 291, (2019)
- N. Wang, T. Hammerschmidt, J. Rogal et al. Accelerating spin-space sampling by auxiliary spin dynamics and temperature-dependent spin-cluster expansion. Physical Review B, 99, 094402, (2019)
- D. Sergeev, B. H. Reis, M. Ziegner et al. Comprehensive analysis of thermodynamic properties of calcium nitrate. J. Chem. Thermodynamics, 134, 187-194, (2019)
- D. Gaertner, K. Abrahams, J. Kottke et al. Concentration-dependent atomic mobilities in FCC CoCrFeMnNi high-entropy alloys. Acta Materialia, 166, 357-370, (2019)
- J. Park, R. Darvishi Kamachali, S.-D. Kim et al. First evidence for mechanism of inverse ripening from in-situ TEM and phase-field study of δ′ precipitation in an Al-Li alloy. Scientific Reports, 9, 3981, (2019)
- B. J. Schäfer, X. Song, P. Sonnweber-Ribic et al. Micromechanical modelling of the cyclic deformation behavior of martensitic SAE 4150—a comparison of different kinematic hardening models. Metals, 9, 368, (2019)
- B. Schaefer, X. Song, P. Sonnweber-Ribic et al. Micromechanical modelling of the cyclic deformation behavior of martensitic SAE 4150—a comparison of different kinematic hardening models. Metals, 9, 368, (2019)
- P. Hallensleben, F. Scholz, P. Thome et al. On crystal mosaicity in single crystal Ni-based superalloys. Crystals, 9, 149, (2019)
- C. Teijeiro Barjas, T. Hammerschmidt, R. Drautz et al. Optimized parallel simulations of analytic bond-order potentials on hybrid shared/distributed memory with MPI and OpenMP. International Journal of High Performance Computing Applications, 33, 227-241, (2019)
- A. Ferrari, P. Kadletz, T. Chakraborty et al. Reconciling experimental and theoretical data in the structural analysis of Ti-Ta shape memory alloys. Shape Memory and Superelasticity, 5, 6-15, (2019)
- P. Wang, J. Koßmann, U. R. Kattner et al. Thermodynamic assessment of the Co-Ta system. Calphad, 64, 205-212, (2019)
- S. Rooein. Experimental analysis and micromechanical modeling of gas diffusion layers (GDL) for PEM fuel cell application. (2019)
- A. Ferrari, D. Sangiovanni, J. Rogal et al. First-principles characterization of reversible martensitic transformations. Physical Review B, 99, 094107, (2019)
- T. Hammerschmidt, B. Seiser, M. Ford et al. BOPfox program for tight-binding and analytic bond-order potential calculations. Computer Physics Communications, 235, 221-233, (2019)
- X. W. Liu, G. Laplanche, A. Kostka et al. Columnar to equiaxed transition and grain refinement of cast CrCoNi medium-entropy alloy by microalloying with titanium and carbon. Journal of Alloys and Compounds, 775, 1068-1076, (2019)
- M. Afshar, F. Mao, H. Jiang et al. Modelling of differential scanning calorimetry heating curves for precipitation and dissolution in an Al-Mg-Si alloy. Computational Materials Science, 158, 235-242, (2019)
- J. Kundin, A. Ramazani, U. Prahl et al. Phase-field modeling of microstructure evolution of binary and multicomponent alloys during selective laser melting (SLM). TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings, -, 301-309, (2019)
- U. Solanki. Influence of the process parameters on melt flow behavior in low pressure sand casting applying numerical and experimental method. (2019)
- D. Qiu, P. Zhao, C. Shen et al. Predicting grain boundary structure and energy in BCC metals by integrated atomistic and phase-field modeling. Acta Materialia, 164, 799-809, (2019)
- N. S. Moghaddam, S. Saedi, A. Amerinatanzi et al. Achieving superelasticity in additively manufactured NiTi in compression without post-process heat treatment. Scientific Reports, 9, 41, (2019)
- R. Drautz. Atomic cluster expansion for accurate and transferable interatomic potentials. Physical Review B, 99, 014104, (2019)
- Z. Wang, J. Zhang, Z. Xu et al. Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper. Journal of Manufacturing Processes, 38, 187-195, (2019)
- Z. Zhou, S. Sun, L. Zou et al. Enhanced strength and high temperature resistance of 25Cr20Ni ODS austenitic alloy through thermo-mechanical treatment and addition of Mo. Fusion Engineering and Design, 138, 175–182, (2019)
- A. Müller, I. Roslyakova, M. Sprenger et al. MultOpt++: a fast regression-based model for the development of compositions with high robustness against scatter of element concentrations. Modelling and Simulation in Materials Science and Engineering, 27, 024001, (2019)
- E. Mahmoudinezhad Zirdehi, F. Varnik. Non-monotonic effect of additive particle size on the glass transition in polymers. The Journal of Chemical Physics, 150, 024903, (2019)
- C. L. M. Alves, J. Rezende, D. Senk et al. Peritectic phase transformation in the Fe–Mn and Fe–C system utilizing simulations with phase-field method. Journal of Materials Research and Technology, 8, 233-242, (2019)
- C. Bonnekoh, U. Jäntsch, J. Hoffmann et al. The brittle-to-ductile transition in cold rolled tungsten plates: impact of crystallographic texture, grain size and dislocation density on the transition temperature. International Journal of Refractory Metals and Hard Materials, 78, 146-163, (2019)
- Y. Lysogorskiy, T. Hammerschmidt, J. Janssen et al. Transferability of interatomic potentials for molybdenum and silicon. Modelling and Simulation in Materials Science and Engineering, 27, 025007, (2019)
- H. Ganesan. Highly parallel molecular dynamics/Monte Carlo coupling towards solutes segregation modeling. PhD Thesis, Ruhr-Universität Bochum, (2019)
- J. Kottke, M. Laurent-Brocq, A. Fareed et al. Tracer diffusion in the Ni-CoCrFeMn system: transition from a dilute solid solution to a high entropy alloy. Scripta Materialia, 159, 94-98, (2019)
2018
- R. Darvishi Kamachali, C. Schwarze, M. Lin et al. Numerical benchmark of phase-field simulations with elastic strains: Precipitation in the presence of chemo-mechanical coupling. Computational Materials Science, 155, 541-553, (2018)
- H. Ganesan, C. Teijeiro Barjas, G. Sutmann. Parallelization comparison and optimization of a scale-bridging framework to model Cottrell atmospheres. Computational Materials Science, 155, 439-449, (2018)
- T. Schaffner, A. Hartmaier, M. Pohl. Prediction of the hydrogen-induced damage to ultra-high strength steel concepts. Materials Science Forum, 941, 124-129, (2018)
- S. Katnagallu, B. Gault, B. Grabowski et al. Advanced data mining in field ion microscopy. Materials Characterization, 146, 307-318, (2018)
- M. Vaidya, G. M. Muralikrishna, S. Divinski et al. Experimental assessment of the thermodynamic factor for diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys. Scripta Materialia, 157, 81-85, (2018)
- M. Grabowski, J. Rogal, R. Drautz. Kinetic Monte Carlo simulations of vacancy diffusion in nondilute Ni-X (X = Re, W, Ta) alloys. Physical Review Materials, 2, 123403, (2018)
- S. Gupta, A. Ma, A. Hartmaier. Mechanical twinning induced alteration in the kinetics of martensitic phase transformation in TRIP-maraging steels. International Journal of Solids and Structures, 155, 213-224, (2018)
- H. Salama. Orientation distribution of grain boundary in a multigrain structure with anisotropic interface energy. Master thesis, (2018)
- X. Zhang, B. Grabowski, F. Körmann et al. Temperature dependence of the stacking-fault Gibbs energy for Al, Cu, and Ni. Physical Review B, 98, 224106, (2018)
- A. G. Kiiamov, Y. Lysogorskiy, F. G. Vagizov et al. Vibrational properties and magnetic specific heat of the covalent chain antiferromagnet RbFeSe2. Physical Review B, 98, 214411, (2018)
- A. Obaied. Application of machine learning for thermo-physical properties of transition metals. Master thesis, (2018)
- W. Amin, J. A. Qayyum, K. Altaf et al. Metal injection molding process parameters as a function of filling performance of 3D printed polymer mold. MATEC Web of Conferences, 225, 6, (2018)
- K. Gillner, S. Becker, K. Lang et al. A method to numerically predict the loading ratio dependency of long crack propagation rates under cyclic loading. International Journal of Fatigue, 116, 234-244, (2018)
- Setareh Medghalchi. Advanced characterization of dendritic microstructures in Ni-base superalloys using EBSD, serial sectioning and new image processing techniques. (2018)
- J. Möller, E. Bitzek, R. Janisch et al. Fracture ab initio: A force-based scaling law for atomistically informed continuum models. Journal of Materials Research, 33, 3750 - 3761, (2018)
- N. Dupin, U. Kattner, B. Sundman et al. Implementation of an effective bond energy formalism in the multicomponent Calphad approach. Journal of Research of National Institute of Standards and Technology, 123, 123020, (2018)
- R. Halver, W. Homberg, G. Sutmann. Benchmarking molecular dynamics with OpenCL on many-core architectures. Parallel Processing and Applied Mathematics, 10778, 244-253, (2018)
- J. Jenke, A. Subramanyam, M. Densow et al. Electronic structure based descriptor for characterizing local atomic environments. Physical Review B, 98, 144102, (2018)
- M. Hassani, E. Mahmoudinezhad Zirdehi, K. Krok et al. Long-range strain correlations in 3D quiescent glass forming liquids. Europhysics Letters, 124, 18003, (2018)
- G. Díaz Leines, J. Rogal. Maximum likelihood analysis of reaction coordinates during solidification in Ni. The Journal of Physical Chemistry B, 122, 10934-10942, (2018)
- H. Hassan, K. Govind, A. Hartmaier. Micromechanical modelling of coupled crystal plasticity and hydrogen diffusion. Philosophical Magazine, 99, 92-115, (2018)
- J. Görler. Phase-field simulation of microstructure evolution coupled to plastic deformation: Application to Ni-base superalloys and low carbon steel. (2018)
- D. Gaertner, J. Kottke, G. Wilde et al. Tracer diffusion in single crystalline CoCrFeNi and CoCrFeMnNi high entropy alloys. Journal of Materials Research, 33, 3184-3191, (2018)
- J. Lian, F. Shen, X. Jia et al. An evolving non-associated Hill48 plasticity model accounting for anisotropic hardening and r-value evolution and its application to forming limit prediction. International Journal of Solids and Structures, 151, 20-44, (2018)
- T. Li, D. Kent, G. Sha et al. Nucleation driving force for ω-assisted formation of α and associated ω morphology in β-Ti alloys. Scripta Materialia, 155, 149-154, (2018)
- Z. Wang, J. Zhang, H. Hassan et al. Coupled effect of crystallographic orientation and indenter geometry on nanoindentation of single crystalline copper. International Journal of Mechanical Sciences, 148, 531–539, (2018)
- M. Markl, A. Müller, N. Ritter et al. Development of single-crystal Ni-base superalloys based on multi-criteria numerical optimization and efficient use of refractory elements. Metallurgical and Materials Transactions A, 49, 4134-4145, (2018)
- J. Engels, S. Gao, W. Amin et al. Indentation size effects in spherical nanoindentation analyzed by experiment and non-local crystal plasticity. Materialia, 3, 21-30, (2018)
- B. Ruttert, O. Horst, I. Lopez-Galilea et al. Rejuvenation of single-crystal Ni-base superalloy turbine blades: Unlimited service life?. Metallurgical and Materials Transactions A, 49, 4262–4273, (2018)
- Y. Jiang, S. Zomorodpoosh, I. Roslyakova et al. Thermodynamic re-assessment of binary Cr-Nb system down to 0 K. CALPHAD, 62, 109-118, (2018)
- N. Volz, C. H. Zenk, R. Cherukuri et al. Thermophysical and mechanical properties of advanced single crystalline Co-base superalloys. Metallurgical and Materials Transactions A, 49, 4099–4109, (2018)
- J. Möller, M. Mrovec, I. Bleskov et al. {110} planar faults in strained bcc metals: Origins and implications of a commonly observed artifact of classical potentials. Physical Review Materials, 2, 093606, (2018)
- C. Gu, Y. Bao, P. Gan et al. An experimental study on the impact of deoxidation methods on the fatigue properties of bearing steels. Steel Research International, 89, 1800129, (2018)
- I. Stockem, A. Bergman, A. Glensk et al. Anomalous phonon lifetime shortening in paramagnetic CrN caused by spin-lattice coupling: A combined spin and ab initio molecular dynamics study. Physical Review Letters, 121, 125902, (2018)
- H. Ganesan, C. Begau, G. Sutmann. MC/MD coupling for scale bridging simulations of solute segregation in solids: An application study. Communications in Computer and Information Science, 889, 112-127, (2018)
- D. Smirnova, S. Starikov, A. Vlasova. New interatomic potential for simulation of pure magnesium and magnesium hydrides. Computational Materials Science, 154, 295-302, (2018)
- S. Starikov, M. Korneva. Description of phase transitions through accumulation of point defects: UN, UO2 and UC. Journal of Nuclear Materials, 510, 373-381, (2018)
- Y. Ikeda, F. Körmann, I. Tanaka et al. Impact of chemical fluctuations on Stacking-Fault energies of CrCoNi and CrMnFeCoNi high-entropy alloys from first principles. Entropy, 20, 655, (2018)
- S. Divinski, A. Pokoev, N. Esakkiraja et al. A mystery of sluggish diffusion in high-entropy alloys: The truth or a myth?. Diffusion Foundations, 17, 69-104, (2018)
- G. Diyoke. Effect of gravity on dendritic solidification kinetics of binary Al-Mg alloy. Master Thesis, Ruhr-Universität Bochum, (2018)
- J. Kundin, R. Schiedung, H. Sohaib et al. Phase-field modeling of pores and precipitates in polycrystalline systems. Modelling and Simulation in Materials Science and Engineering, 26, 065003, (2018)
- H. Sohaib. The study of the effect of porosity on the grain growth in polycrystalline ceramic fibers. Master Thesis, Ruhr-Universität Bochum, (2018)
- Z. Xu, Z. He, Y. Song et al. Topic Review: Application of Raman spectroscopy characterization in micro/nano-machining. Micromechanics, 2018, 361, (2018)
- A. Ferrari, A. Paulsen, J. Frenzel et al. Unusual composition dependence of transformation temperatures in Ti-Ta-X shape memory alloys. Physical Review Materials, 2, 073609, (2018)
- A. Gupta, V. Kulitcki, B. T. Kavakbasi et al. Non-monotonic effect of precipitation on grain boundary diffusion in Al-based alloys. Physical Review Materials, 2, 073801, (2018)
- A. Gupta, V. Kulitcki, B. Kavakbasi et al. Precipitate-induced nonlinearities of diffusion along grain boundaries in Al-based alloys. Physical Review Materials, 2, 073801, (2018)
- K. Gillner, M. Henrich, S. Münstermann. Numerical study of inclusion parameters and their influence on fatigue lifetime. International Journal of Fatigue, 111, 70-80, (2018)
- X. Zhang, B. Grabowski, T. Hickel et al. Calculating free energies of point defects from ab initio. Computational Materials Science, 148, 249-259, (2018)
- C. Hüter, P. Shanthraj, E. McEniry et al. Multiscale modelling of hydrogen transport and segregation in polycrystalline steels. Metals, 8, 430, (2018)
- G. Eggeler, P. Wollgramm, K. Neuking et al. On shear testing of single crystal Ni-base superalloys. Metallurgical and Materials Transactions A, 49, 3951-3962, (2018)
- B. Weise, B. Dutta, N. Teichert et al. Role of disorder when upscaling magnetocaloric Ni-Co-Mn-Al Heusler alloys from thin films to ribbons. Scientific Reports, 8, 9147, (2018)
- Y. Gong, B. Grabowski, A. Glensk et al. Temperature dependence of the Gibbs energy of vacancy formation of fcc Ni. Physical Review B, 97, 214106, (2018)
- C. Schwarze, R. Darvishi Kamachali, C. Mießen et al. Computationally efficient phase-field simulation studies using RVE sampling and statistical analysis. Computational Materials Science, 147, 204-216, (2018)
- D. Smirnova, S. Starikov, I. S. Gordeev . Evaluation of the structure and properties for the high-temperature phase of zirconium from the atomistic simulations. Computational Materials Science, 152, 51–59, (2018)
- M. Ali. High temperature creep in Ni-based superalloys. Master Thesis, Ruhr-Universität Bochum, (2018)
- S. Makarov, L. Kolotova, S. Starikov et al. Resonant silicon nanoparticles with controllable crystalline states and nonlinear optical responses. Nanoscale, 10, 11403–11409, (2018)
- M. Gross, F. Varnik. Shear-density coupling for a compressible single-component yield-stress fluid. Soft Matter, 14, 4577-4590, (2018)
- M. Radek, J.-G. Tenberge, S. Hilke et al. STEMcl–A multi-GPU multislice algorithm for simulation of large structure and imaging parameter series. Ultramicroscopy, 188, 24-30, (2018)
- R. Cherukuri. Study of thermodynamic and mechanical properties relationship using first-principles CALPHAD amd experimental data for Ni 3%X, X=Re, W, Ru alloys. Master Thesis, Ruhr-Universität Bochum, (2018)
- E. Ghobadi, A. Marquardt, E. Mahmoudinezhad Zirdehi et al. The influence of water and solvent uptake on functional properties of shape-memory polymers. International Journal of Polymer Science, 2018, 7819353, (2018)
- S. Gao, P. Wollgramm, G. Eggeler et al. A phenomenological creep model for nickelbase single crystal superalloys at intermediate temperatures. Modelling and Simulation in Materials Science and Engineering, 26, 055001, (2018)
- E. McEniry, T. Hickel, J. Neugebauer. Ab initio simulation of hydrogen-induced decohesion in cementite-containing microstructures. Acta Materialia, 150, 53-58, (2018)
- A. Waske, B. Dutta, N. Teichert et al. Coupling phenomena in magnetocaloric materials. Energy Technology, 6, 1429-1447, (2018)
- C. Richter, U. Krupp, M. Zeißig. Ein validiertes Auslegungsverfahren gegen Reibermüdung unter Berücksichtigung plastischer Effekte Teil 1: Versuch und Berechnung. Konstruktion, 5, 83-89, (2018)
- F. Emeis, M. Peterlechner, S. Divinski et al. Grain boundary engineering parameters for ultrafine grained microstructures: Proof of principles by a systematic composition variation in Cu-Ni system. Acta Materialia, 150, 262-272, (2018)
- R. Stern, T. Wang, J. Carrete et al. Influence of point defects on the thermal conductivity in FeSi. Physical Review B, 97, 195201, (2018)
- S. Kirsch, F. Welsch, N. Michaelis et al. NiTi-based elastocaloric cooling on the macroscale: From basic concepts to realization. Energy Technology, 6, 1567-1587, (2018)
- A. Katre, J. Carrete, T. Wang et al. Phonon transport unveils the prevalent point defects in GaN. Physical Review Materials, 2, 050602, (2018)
- E. Ghobadi, A. Marquardt, E. Zirdehi et al. The influence of water and solvent uptake on functional properties of shape-memory polymers. International Journal of Polymer Science, 2018, 7819353, (2018)
- R. Halver, W. Homberg, G. Sutmann. Function portability of molecular dynamics on heterogeneous parallel architectures with OpenCL. The journal of supercomputing, 74, 1522-1533, (2018)
- X. Fu, Z. Xu, Z. He et al. Molecular dynamics simulation of silicon ion implantation into diamond and subsequent annealing. Nuclear Instruments and Methods in Physics Research B, (2018)
- J. Frenzel, G. Eggeler, E. Quandt et al. High-performance elastocaloric materials for the engineering of bulk- and micro-cooling devices. Materials Research Society, 43, 280-284, (2018)
- R. Hadian, B. Grabowski, M. Finnis et al. Migration mechanisms of a faceted grain boundary. Physical Review Materials, 2, 043601, (2018)
- D. Korbmacher, J. von Pezold, S. Brinckmann et al. Modeling of phase equilibria in Ni-H: Bridging the atomistic with the continuum scale. Metals, 8, 280, (2018)
- S. Gupta, P. Kucharczyk, S. Münstermann et al. Prestraining induced enhancement in the fatigue limit obtained by load increasing thermal method for metastable austenitic stainless steel. Steel Research International, 89, 1700434, (2018)
- V.I. Razumovskiy, S. Divinski, L. Romaner. Solute segregation in Cu: DFT vs. experiment. Acta Materialia, 147, 122-132, (2018)
- S. Noori. Effect of Si on pearlite transformation in steel. Master Thesis, Ruhr-Universität Bochum, (2018)
- J. Albina, A. Marusczyk, T. Hammerschmidt et al. Finite-temperature property-maps of Li-Mn-Ni-O cathode materials from ab initio calculations. Journal of Materials Chemistry A, 6, 5687-5694, (2018)
- M. Tian. Microstructural and mechanical investigation of a selective electron beam melted in single crystal Ni-base superalloy. Master Thesis, Ruhr-Universität Bochum, (2018)
- M. Hassani, P. Engels, F. Varnik. Wall effects on spatial correlations of non-affine strain in a 3D model glass. EPL Journal, 121, 18005, (2018)
- M. Vaidya, K. G. Pradeep, B. S. Murty et al. Bulk tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys. Acta Materialia, 146, 211-224, (2018)
- J. Tenkamp, A. Koch, S. Knorrre et al. Defect-correlated fatigue assessment of A356-T6 aluminum cast alloy using computed tomography based Kitagawa-Takahashi diagrams. International Journal of Fatigue, 108, 25-34, (2018)
- G. Liang, S. Schmauder, M. Lyu et al. An investigation of the influence of initial roughness on the friction and wear behavior of ground surfaces. Materials, 11, 237, (2018)
- T. Schaffner, A. Hartmaier, V. Kokotin et al. Analysis of hydrogen diffusion and trapping in ultra-high strength steel grades. Journal of Alloys and Compounds, 746, 557-566, (2018)
- D. Edström, D. Sangiovanni, L. Hultman et al. Elastic properties and plastic deformation of TiC- and VC-based pseudobinary alloys. Acta Materialia, 144, 376-385, (2018)
- Z. Zhang, J. Cui, B. Wang et al. In situ TEM observation of rebonding on fractured silicon carbide. Nanoscale, 10, 6261-6269, (2018)
- U. Krupp, K. Jahns, K. Balinski et al. Numerical analysis of diffusion-controlled internal corrosion by the cellular automata approach. Defect and Diffusion Forum, 383, 51-58, (2018)
- B. Dutta, F. Körmann, T. Hickel et al. Impact of Co and Fe doping on the martensitic transformation and the magnetic properties in Ni-Mn-based Heusler alloys. Physica Status Solidi b, 255, 1700455, (2018)
- Y. Ikeda, F. Körmann, B. Dutta et al. Temperature-dependent phonon spectra of magnetic random solid solutions. Computational Materials, 4, 7, (2018)
- C. Liebscher, M. Yao, P. Dey et al. Tetragonal fcc-Fe induced by kappa-carbide precipitates: Atomic scale insights from correlative electron microscopy, atom probe tomography, and density functional theory. Physiacal Review Materials, 2, 023804, (2018)
- M. Rajendran. γ − γ ′ Microstructure Evolution in Single Crystal (SX) Ni-base superalloys. PhD Thesis, Ruhr-Universität Bochum, (2018)
- M. Almodallaleh. Anwendungen von automatisierter Datenverarbeitung auf Doppelscherversuche von Nickelbasissuperlegierung. (2018)
- D. Sangiovanni, A. B. Mei, D. Edström et al. Effects of surface vibrations on interlayer mass transport: Ab initio molecular dynamics investigation of Ti adatom descent pathways and rates from TiN/TiN(001) islands. Physical Review B, 97, 035406, (2018)
- J. Wang, G. Madsen, R. Drautz. Grain boundaries in bcc-Fe: A density-functional theory and tight-binding study. Modelling and simulation in materials science and engineering, 26, 025008, (2018)
- R. Schiedung, I. Steinbach, F. Varnik. Multi-phase-field method for surface tension induced elasticity. Physical Review B, 97, 035410, (2018)
- T. Waurischk, M. Söker, A. Giertler et al. Slip band formation and crack initiation during very high cycle fatigue of duplex stainless steel – part 1: Mechanical testing and microstructural investigations. Fatigue of materials at very high numbers of loading cycles, 95-110, (2018)
2017
- T. Chakraborty. Atomistic modelling of phase transitions in Ti-Ta high-temperature shape memory alloys. (2017)
- T. Pradhan. Comparison of various interatomic potentials for point-defect migration in transition metals. (2017)
- Y. Schneider, W. Wasserbäch, S. Schmauder. Experimental and micro‐macro integrated FE investigation of texture and microstructure evolution in polycrystalline Ag‐SnO2 metal matrix composites. PAMM, 17, 461–462, (2017)
- A. Mishra. First principles calculations on field evaporation from metal surfaces. (2017)
- A. Izardar. Investigation of self-diffusion in Mo using classical molecular dynamics simulations. (2017)
- K. Gillner, S. Münstermann. Numerically predicted high cycle fatigue properties through representative volume elements of the microstructure. International Journal of Fatigue, 105, 219-234, (2017)
- E. Pogorelov, J. Kundin. Programs for the calculation of the spinodal decomposition growth rate and the spinodal gap in nanoparticles. Comp. Mater Sci. Data in Brief, 15, 840-850, (2017)
- L. Zhu, B. Grabowski, J. Neugebauer. Efficient approach to compute melting properties fully from ab initio with application to Cu. Physical Review B, 96, 224202, (2017)
- M. Tegeler. Massively parallel multiphase field simulations. PhD thesis, (2017)
- S. Gao, U. Gogilan, A. Ma et al. Numerically efficient microstructure-based calculation of internal stresses in superalloys. Modelling and Simulation in Materials Science and Engineering, 26, 025001, (2017)
- C. Schwarze. Simulation and Investigation of Precipitation in Aluminium Alloys. PhD Thesis, Ruhr-Universität Bochum, (2017)
- M. Naderi, M. Peterlechner, S. Divinski et al. The effect of pre-annealing on defects, microstructure and recrystallization of ultra-fine grained Al produced by high-pressure torsion. Materials Science and Engineering A, 708, 171-180, (2017)
- N. Vajragupta, H. Hassan, A. Hartmaier. Towards prediction of springback in deep drawing using a micromechanical modeling scheme. Procedia Engineering, 207, 60-65, (2017)
- M. Ipekoglu, O. Erbas, H. Hassan. Comparison of deep drawability of AA5754-H22 and AA6061-T6 aluminum alloys for automotive applications. Materials Testing, Materialprüfung, 59, 1003-1008, (2017)
- A. Leineweber, T. Hickel, B. Azimi-Manavi et al. Crystal structures of Fe4C vs. Fe4N analysed by DFT calculations: Fcc-based interstitial superstructures explored. Acta Materialia, 140, 433-442, (2017)
- U. Krupp, A. Giertler, K. Koschella. Microscopic damage evolution during very‐high‐cycle fatigue (VHCF) of tempered martensitic steel. Fatigue and Fracture of Engineering Materials and Structures, 40, 1731-1740, (2017)
- Q. Zheng, A. B. Mei, M. Tuteja et al. Phonon and electron contributions to the thermal conductivity of VNχ epitaxial layers. Physical Review Materials, 1, 065002, (2017)
- M. J. Yao, E. Welsch, D. Ponge et al. Strengthening and strain hardening mechanisms in a precipitation-hardened high-Mn lightweight steel. Acta Materialia, 140, 258-273, (2017)
- D. Alfaouri. Atomistic modeling of interfaces between topologically close-packed and cubic structures. (2017)
- M. Boeff, H. Hassan, A. Hartmaier. Micromechanical modeling of fatigue crack initiation in polycrystals. Journal of Materials Research, 32, 4375-4386, (2017)
- H. Alvaro Galue, G. Díaz Leines. Origin of spectral band patterns in the cosmic unidentified infrared emission. Physical Review Letters, 119, 171102, (2017)
- D. Liu, D. Huang, S. Liu et al. Composition-dependent tracer diffusion coefficients in the B2 Ni–Al–Ti alloy via a combination of radiotracer and diffusion couple techniques. Journal of Alloys and Compounds, 720, 332-339, (2017)
- Z. Li, F. Körmann, B. Grabowski et al. Ab initio assisted design of quinary dual-phase high-entropy alloys with transformation-induced plasticity. Acta Materialia, 136, 262-270, (2017)
- E. Pogorelov, J. Kundin, M. Fleck. Analysis of the dependence of spinodal decomposition in nanoparticles on boundary reaction rate and free energy of mixing. Computational Materials Science, 140, 105-112, (2017)
- J. Burow, J. Frenzel, C. Somsen et al. Grain nucleation and growth in deformed NiTi shape memory alloys: An in situ TEM study. Shape Memory and Superelasticity, 3, 347–360, (2017)
- N. Vajragupta, S. Ahmed, M. Boeff et al. Micromechanical modeling approach to derive the yield surface for BCC and FCC steels using statistically informed microstructure models and nonlocal crystal plasticity. Physical Mesomechanics, 20, 100-108, (2017)
- M. Kanani, A. Hartmaier, R. Janisch. The shear instability energy: A new parameter for materials design?. Modelling and Simulation in Materials Science and Engineering, 25, 075009, (2017)
- D. Gambino, D. Sangiovanni, B. Alling et al. Nonequilibrium ab initio molecular dynamics determination of Ti monovacancy migration rates in B1 TiN. Physical Review B, 96, 104306, (2017)
- F. Körmann, Y. Ikeda, B. Grabowski et al. Phonon broadening in high entropy alloys. Computational Materials, 3, 36, (2017)
- P. Hallensleben, H. Schaar, P. Thome et al. On the evolution of cast microstructures during processing of single crystal Ni-base superalloys using a Bridgman seed technique. Materials & Design, 128, 98-111, (2017)
- T. Hammerschmidt, A. Bialon, R. Drautz. Structure map including off-stoichiometric and ternary sp-d-valent compounds. Modelling and Simulation in Materials Science and Engineering, 25, 074002, (2017)
- H. Maier, E. Karsten, A. Paulsen et al. Mircrostructural evolution and functional fatigue of a Ti-25Ta high-temperature shape memory alloy. International Journal of Materials Research, 32, 4287-4295, (2017)
- Z. B. Wang, S. Divinski, Z. P. Luo et al. Revealing interfacial diffusion kinetics in ultra-fine laminated Ni with low-angle grain boundaries. Materials Research Letters, 5, 577-583, (2017)
- M. Kulosa, M. Neumann, M. Boeff et al. A study on microstructural parameters for the characterization of granular porous ceramics using a combination of stochastic and mechanical modeling. International Journal of Applied Mechanics, 09, 1750069, (2017)
- A. Marusczyk. Ab-initio modeling of HE-NCM as cathode materials for Lithium-Ion batteries. (2017)
- G. Sutmann, H. Ganesan, C. Begau. Cluster formation in stochastic disk systems. AIP Conference Proceedings, 1863, 560089, (2017)
- M. Tegeler, A. Monas, O. Shchyglo et al. Effect of microstructure during dendritic solidification on melt flow: A phase-field lattice-Boltzmann study. Proceedings of the 6th Decennial International Conference on Solidification Processing, (2017)
- D. Naujoks, Y. M. Eggeler, P. Hallensleben et al. Identification of a ternary μ-phase in the Co-Ti-W system – An advanced correlative thin-film and bulk combinatorial materials investigation. Acta Materialia, 138, 100-110, (2017)
- Y. Liang. Nucleation in Ni-Al alloys - an atomistic study. (2017)
- A. Marusczyk, J. Albina, T. Hammerschmidt et al. Oxygen activity and peroxide formation as charge compensation mechanisms in Li2MnO3. Journal of Materials Chemistry A, 5, 15183-15190, (2017)
- A. Giertler, N. Heilemann, B. Dönges et al. Evaluation of three-dimensional microstructural effects on damage evolution during VHCF loading of a duplex stainless steel – Mechanisms of damage evolution and corresponding fatigue life. Proceedings of the International Conference on Very High Cycle Fatigue VHCF7, Dresden, (2017)
- E. McEniry, T. Hickel, J. Neugebauer. Hydrogen behaviour at twist {110} grain boundaries in α-Fe. Philosophical Transactions of The Royal Society A, 375, 20160402, (2017)
- C. Hüter, J. Neugebauer, G. Boussinot et al. Modelling of grain boundary dynamics using amplitude equations. Continuum Mechanics and Thermodynamics, 29, 895-911, (2017)
- R. Schiedung, R. Darvishi Kamachali, I. Steinbach et al. Multi-phase-field model for surface and phase-boundary diffusion. Physical Review E, 96, 012801, (2017)
- T. Ungar, J. Frenzel, S. Gollerthan et al. On the competition between the stress-induced formation of martensite and dislocation plasticity during crack propagation in pseudoelastic NiTi shape memory alloys. Journal of Materials Research, 32, 4433-4442, (2017)
- M. Vaidya, K. G. Pradeep, B. S. Murty et al. Radioactive isotopes reveal a non sluggish kinetics of grain boundary diffusion in high entropy alloys. Scientific Reports, 7, 12273, (2017)
- T. A. Timmerscheidt, P. Dey, D. Bogdanovski et al. The role of κ-carbides as hydrogen traps in high-Mn steels. Metals, 7, 264, (2017)
- U. Krupp, A. Giertler, K. Koschella. The significance of microstructure inhomogeneities during VHCF of tempered martensitic steel. Proceedings of the International Conference on Very High Cycle Fatigue VHCF7, Dresden, (2017)
- T. Schablitzki, J. Rogal, R. Drautz. A kinetic Monte Carlo approach to diffusion-controlled thermal desorption spectroscopy. Philosophical Transactions of The Royal Society A, 375, 20160404, (2017)
- I. Roslyakova. Modeling thermodynamical properties by segmented non-linear regression. PhD Thesis, (2017)
- S. Münstermann, J. Lian, B. Wu. Modelling of ductile fracture under non-proportional strain paths. Proceedings of the 14th International Conference on Fracture, Rhodes, 1, (2017)
- S. Tumminello, N. Del Negro, C. Carrascal et al. Multiphase characterization of Cu-In-Sn alloys with 17 at.% Cu and comparison with calculated phase equilibria. Journal of Phase Equilibria and Diffusion, 38, 276-287, (2017)
- S. Vakili, I. Steinbach, F. Varnik. On the numerical evaluation of local curvature for diffuse interface models of microstructure evolution. Procedia Computer Science, 108, 1852-1862, (2017)
- X. Zhang, T. Hickel, J. Rogal et al. Origin of structural modulations in ultrathin Fe films on Cu(001). Physical Review Letters, 118, 236101, (2017)
- M. Tegeler, O. Shchyglo, R. Darvishi Kamachali et al. Parallel multiphase field simulations with OpenPhase. Computer Physics Communications, 215, 173 - 187, (2017)
- L. Huber, B. Grabowski, M. Militzer et al. Ab initio modelling of solute segregation energies to a general grain boundary. Acta Materialia, 132, 138-148, (2017)
- F. Körmann, A. Ruban, M. Sluiter. Long-ranged interactions in bcc NbMoTaW high-entropy alloys. Materials Research Letters, 5, 35-40, (2017)
- E. Mahmoudinezhad Zirdehi, A. Marquardt, G. Eggeler et al. Molecular dynamics simulations of entangled polymers: The effect of small molecules on the glass transition temperature. Procedia Computer Science, 108, 265-271, (2017)
- C. Freysoldt. On-the-fly parameterization of internal coordinate force constants for quasi-Newton geometry optimization in atomistic calculations. Computational Materials Science, 133, 71-81, (2017)
- C. Richter, U. Krupp, M. Zeißig. Plastic effects on high cycle fatigue at the edge of contact of turbine blade fixtures. Proceedings of ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition, Charlotte, U.S.A, 7A, V07AT31A008, (2017)
- K. Koschella, A. Giertler, U. Krupp. Significance of the microstructure hierarchy on VHCF crack initiation and propagation in tempered martensitic steel. Proceedings of the 14th International Conference on Fracture, Rhodes, 1, (2017)
- C. Schwarze, A. Gupta, T. Hickel et al. Phase-field study of ripening and rearrangement of precipitates under chemomechanical coupling. Physical Review B, 95, 174101, (2017)
- B. Wu, N. Vajragupta, J. Lian et al. Prediction of plasticity and damage initiation behaviour of C45E + N steel by micromechanical modelling. Materials & Design, 121, 154-166, (2017)
- C. Teijeiro Barjas, H. Ganesan, R. Halver et al. Towards a flexible cell-based framework for parallel scale-bridging simulations in materials science: A first case study. Proceedings of the 5th International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering, Hungary, Paper 24, (2017)
- J. Kundin, A. Choudhary. Application of the anisotropic phase-field crystal model to investigate the lattice systems of different anisotropic parameters and orientations. Modelling and Simulation in Materials Science and Engineering, 25, 055004, (2017)
- M. Densow. Accessing descriptions for transferability using high-throughput calculations. (2017)
- G. Díaz Leines, R. Drautz, J. Rogal. Atomistic insight into the non-classical nucleation mechanism during solidification in Ni. The Journal of Chemical Physics, 146, 154702, (2017)
- R. Darvishi Kamachali, C. Schwarze. Inverse ripening and rearrangement of precipitates under chemomechanical coupling. Computational Materials Science, 130, 292-296, (2017)
- J. Kundin. Numerical investigation of the recrystallization kinetics by means of the KWC phase-field model with special order parameters. Modelling and Simulation in Materials Science and Engineering, 25, 045008, (2017)
- K. Schacht, A. H. Motaman, U. Prahl et al. A unified dislocation density-dependent physical-based constitutive model for cold metal forming. Proceedings of the 20th International ESAFORM Conference on Material Forming: ESAFORM 2017, 1896, 160020, (2017)
- X. Zhang, B. Grabowski, F. Körmann et al. Accurate electronic free energies of the 3d, 4d, and 5d transition metals at high temperatures. Physical Review B, 95, 165126, (2017)
- S. Divinski. Defects and diffusion in ordered compounds. Handbook of Solid State Diffusion: Volume 1, Diffusion Fundamentals and Techniques, 449-517, (2017)
- A. Paul, T. Launila, S. Divinski. Defects, driving forces and definitions of diffusion coefficients in solids. Handbook of Solid State Diffusion: Volume 1, Diffusion Fundamentals and Techniques, 1-54, (2017)
- G. Laplanche, T. Birk, S. Schneider et al. Effect of temperature and texture on the reorientation of martensite variants in NiTi shape memory alloys. Acta Materialia, 127, 143-152, (2017)
- D. Gaertner, G. Wilde, S. Divinski. Grain boundary diffusion and segregation of 57Co in high-purity copper: Radiotracer measurements in B and C diffusion regimes. Acta Materialia, 127, 407-415, (2017)
- V. Hieronymus-Schmidt, H. Rösner, A. Zaccone et al. Shear banding in metallic glasses described by alignments of Eshelby quadrupoles. Physical Review B, 95, 134111, (2017)
- S. Divinski. Tracer diffusion and understanding the atomic mechanisms of diffusion. Handbook of Solid State Diffusion: Volume 1, Diffusion Fundamentals and Techniques, 55-78, (2017)
- A. Hartmaier. Vom Atom zum Bauteil und zurück. Physik in unserer Zeit, 48, 190-197, (2017)
- S. Gao, M. Fivel, A. Ma et al. 3D discrete dislocation dynamics study of creep behavior in Ni-base single crystal superalloys by a combined dislocation climb and vacancy diffusion model. Journal of the Mechanics and Physics of Solids, 102, 209-223, (2017)
- P. Dey, R. Nazarov, B. Dutta et al. Ab initio explanation of disorder and off-stoichiometry in Fe-Mn-Al-C κ carbides. Physical Review B, 95, 104108, (2017)
- A. Gupta, B. T. Kavakbasi, B. Dutta et al. Low-temperature features in the heat capacity of unary metals and intermetallics for the example of bulk aluminum and Al3Sc. Physical Review B, 95, 094307, (2017)
- A. Ladines, R. Drautz, T. Hammerschmidt. Ab-initio study of C and N point defects in the C14-Fe2Nb phase. Journal of Alloys and Compounds, 693, 1315-1322, (2017)
- Y. Buranova, V. Kulitskiy, M. Peterlechner et al. Al3(Sc,Zr)-based precipitates in Al–Mg alloy: Effect of severe deformation. Acta Materialia, 124, 210-224, (2017)
- A. Kwiatkowski da Silva, G. Leyson, M. Kuzmina et al. Confined chemical and structural states at dislocations in Fe–9wt%Mn steels: A correlative TEM-atom probe study combined with multiscale modelling. Acta Materialia, 124, 305-315, (2017)
- K. Jahns, M. Landwehr, J. Wübbelmann et al. Modelling of intergranular oxidation by the cellular automata approach. Oxidation of Metals, 87, 285-295, (2017)
- J. Görler, I. Lopez-Galilea, L. Mujica et al. Topological phase inversion after long-term thermal exposure of nickel-base superalloys: Experiment and phase-field simulation. Acta Materialia, 124, 151-158, (2017)
- Z. Pei, X. Zhang, T. Hickel et al. Atomic structures of twin boundaries in hexagonal close-packed metallic crystals with particular focus on Mg. Computational Materials, 3, 6, (2017)
- V. Khalili, J. Khalil-Allafi, J. Frenzel et al. Bioactivity and electrochemical behavior of hydroxyapatite-silicon-multi walled carbon nano-tubes composite coatings synthesized by EPD on NiTi alloys in simulated body fluid. Materials Science and Engineering C, 71, 473-482, (2017)
- H. Dette, J. Gösmann, C. Greiff et al. Efficient sampling in materials simulation - Exploring the parameter space of grain boundaries. Acta Materialia, 125, 145-155, (2017)
- N. Ibrahim, M. Peterlechner, F. Emeis et al. Mechanical alloying via high-pressure torsion of the immiscible Cu50Ta50 system. Materials Science and Engineering A, 685, 19-30, (2017)
- A. Wieczorek, J. Frenzel, M. Schmidt et al. Optimizing Ni-Ti-based shape memory alloys for ferroic cooling. Functional Materials Letters, 10, 1740001, (2017)
- J. Hiebeler. Recovery and Recrystallization during hot deformation in austenitic steel. PhD Thesis, Ruhr-Universität Bochum, (2017)
- T. Wang, J. Carrete, A. Roekeghem et al. Ab initio phonon scattering by dislocations. Physical Review B, 95, 7, (2017)
- B. Dongre, T. Wang, G. Madsen. Comparison of the Green–Kubo and homogeneous non-equilibrium molecular dynamics methods for calculating thermal conductivity. Modelling and Simulation in Materials Science and Engineering, 25, 8, (2017)
- Y. Lin, M. Mrovec, V. Vitek. Development of bond-order potentials for bcc transition metals. Solid State Phenomena, 258, 3-10, (2017)
- P.B. Straumal, M. Wegner, D.V. Shangina et al. Diffusion of 63Ni in the severely deformed ultrafine grained Cu-base alloys. Scripta Materialia, 127, 141-145, (2017)
- D. Edström, D. Sangiovanni, L. Hultman et al. Effects of incident N atom kinetic energy on TiN/TiN(001) film growth dynamics: A molecular dynamics investigation. Journal of Applied Physics, 121, 025302, (2017)
- M. Mikula, M. Truchlý, D. Sangiovanni et al. Experimental and computational studies on toughness enhancement in Ti-Al-Ta-N quaternaries. Journal of Vacuum Science & Technology A, 35, 060602, (2017)
- B. Konkena, J. Masa, A. J. Botz et al. Metallic NiPS3@NiOOH core-shell heterostructures as highly efficient and stable electrocatalyst for the oxygen evolution reaction. ACS Catalysis, 7, 229–237, (2017)
- D. Guedes, S. Barrez, F. Thébault et al. Modeling and experimental insights of sulfide stress cracking corrosion mechanism. NACE International Corrosion 2017 Conference Proceedings, 9328, (2017)
- C. Brecher, W. Bleck, J. Feldhusen et al. Multi-technology platforms (MTPs). Integrative Production Technology: Theory and Applications, 369-514, (2017)
- H. Kobayashi, R. Halver, G. Sutmann et al. Polymer conformations in ionic microgels in the presence of salt: Theoretical and mesoscale simulation results. Polymers, 9, 1-19, (2017)
- I. Steinbach. Quantum-phase-field concept of matter: Emergent gravity in the dynamic universe. Zeitschrift fur Naturforschung A, 72, 51–58, (2017)
- R. Stern. Thermal effects on electrical and dynamical properties of solids. (2017)
- M. Mikula, D. Sangiovanni, D. Plašienka et al. Thermally induced age hardening in tough Ta-Al-N coatings via spinodal decomposition. Journal of Applied Physics, 121, 155304, (2017)
- S. Menon. Transition path sampling of seeded nucleation during solidification in nickel. (2017)
- J. Carrete, B. Vermeersch, A. Katre et al. almaBTE: A solver of the space-time dependent Boltzmann transport equation for phonons in structured materials. Computer Physics Communications, 220, 351-362, (2017)
- W. Ko, S. Maisel, B. Grabowski et al. Atomic scale processes of phase transformations in nanocrystalline NiTi shape-memory alloys. Acta Materialia, 123, 90-101, (2017)
- P. B. Straumal, M. Wegner, D. V. Shangina et al. Diffusion of 63Ni in the severely deformed ultrafine grained Cu-base alloys. Scripta Materialia, 127, 141-145, (2017)
- V. V. Popov, E. N. Popova, D. D. Kuznetsov et al. Evolution of Ni structure under ECAP and DCAP and further annealing. Materials Science Forum, 879, 1507-1512, (2017)
- W. Bleck, C. Brecher, M. Herty et al. Integrated computational materials and production engineering (ICMPE). Integrative Production Technology: Theory and Applications, 253-364, (2017)
- I. Häusler, C. Schwarze, M. Bilal et al. Precipitation of T1 and θ′ phase in Al-4Cu-1Li-0.25Mn during age hardening: Microstructural investigation and phase-field simulation. Materials, 10, 117, (2017)
- M. Q. Jiang, G. Wilde, L. H. Dai. Shear band dilatation in amorphous alloys. Scripta Materialia, 127, 54-57, (2017)
2016
- J. Wang. Structural transformations in Fe-C alloys: Atomistic modeling of grain boundaries and segregation in α iron. PhD Thesis, Ruhr-Universität Bochum, (2016)
- A. K. Vatti. An ab initio study of muscovite mica and formation energy of ions in liquid water. PhD Thesis, Ruhr-Universität Bochum, (2016)
- I. Roslyakova, B. Sundman, H. Dette et al. Modeling of Gibbs energies of pure elements down to 0 K using segmented regression. CALPHAD Journal, 55, 165-180, (2016)
- M. Vaidya, S. Trubel, B. S. Murty et al. Ni tracer diffusion in CoCrFeNi and CoCrFeMnNi high entropy alloys. Journal of Alloys and Compounds, 688, 994-1001, (2016)
- P. Schaffnit, C. Stallybrass, H. Schaar et al. Phase field modeling of the phase transformation in the coarse-grained heat-affected zone of large diameter linepipes. Mathematical Modelling of Weld Phenomena 11, 11, 123-134, (2016)
- U. Krupp, A. Giertler, M. Söker et al. The influence of microstructure heterogeneities on the very high cycle fatigue behavior of duplex stainless steel. Solid State Phenomena, 258, 255-258, (2016)
- B. Sundman, U. Kattner, C. Sigli et al. The OpenCalphad thermodynamic software interface. Computational Materials Science, 125, 188-196, (2016)
- D. Sopu, J. Rogal, R. Drautz. Thermodynamic and kinetic solid-liquid interface properties from transition path sampling. The Journal of Chemical Physics, 145, 244703, (2016)
- T. Chakraborty, J. Rogal, R. Drautz. Unraveling the composition dependence of the martensitic transformation temperature: A first-principles study of Ti-Ta alloys. Physical Review B, 94, 224104, (2016)
- A. Ma, A. Hartmaier. A crystal plasticity smooth-particle hydrodynamics approach and its application to equalchannel angular pressing simulation. Modelling and Simulation in Materials Science and Engineering, 24, 085011, (2016)
- S. Bhattacharya, G. Madsen. A novel p-type half-Heusler from high-throughput transport and defect calculations. Journal of Materials Chemistry C, 4, 11261-11268, (2016)
- F. Kazemi. Effect of boron additions during dendritic solidification on the microstructure and mechanical properties. Master Thesis, Ruhr-Universität Bochum, (2016)
- H. Heyn. Molecular Dynamics Simulation of nanoindentation of cc and bcc systems: Influence of hydrogen on vacancies. Master Thesis, Ruhr-Universität Bochum, (2016)
- H. Hassan, F. Maqbool, A. Güner et al. Springback prediction and reduction in deep drawing under influence of unloading modulus degradation. International Journal of Material Forming, 9, 619–633, (2016)
- R. Stern, G. Madsen. Ab initio investigation of the anomalous phonon softening in FeSi. Physical Review B, 94, 144304, (2016)
- R. Scholz, R.-M. Mittendorf, J. Engels et al. Direction-dependent mechanical characterization of cellulose-based composite vulcanized fiber. Materials Testing, 58, 813-817, (2016)
- P.A.T. Olsson, M. Mrovec, M. Kroon. First principles characterisation of brittle transgranular fracture of titanium hydrides. Acta Materialia, 118, 362-373, (2016)
- E. Borukhovich, M. Boeff, A. Monas et al. Full-field simulation of solidification and forming of polycrystals. MATEC Web of Conferences, 80, 02014, (2016)
- Y. Lin, M. Mrovec, V. Vitek. Importance of inclusion of the effect of s electrons into bond-order potentials for transition bcc metals with d-band mediated bonding. Modelling and Simulation in Materials Science and Engineering, 24, 085001, (2016)
- M. Kulosa. Modellierung der elastischen und thermischen Eigenschaften sowie des Schädigungsverhaltens poröser partikelbasierter Keramiken. PhD Thesis, Ruhr-Universität Bochum, (2016)
- J. Hiebeler, K. Khlopkov, O. Shchyglo et al. Modelling of flow behaviour and dynamic recrystallization during hot deformation of MS-W 1200 using the phase field framework. MATEC Web of Conferences, 80, 01003, (2016)
- G. Du. Phase-field simulation of lath martensite in low-carbon steel. PhD Thesis, Ruhr-Universität Bochum, (2016)
- A. Monas. Phase-field simulation of morphology evolution during eutectic solidification. PhD Thesis, Ruhr-Universität Bochum, (2016)
- R. Sivanesapillai, N. Falkner, A. Hartmaier et al. A CSF-SPH method for simulating drainage and imbibition at pore-scale resolution while tracking interfacial areas. Advances in Water Resources, 1, 212-234, (2016)
- M. Bilal. Growth kinetics and coherency loss from θ´ to θ in Al-Cu alloy: A phase-field study. Master Thesis, Ruhr-Universität Bochum, (2016)
- X. Zhang, T. Hickel, J. Rogal et al. Interplay between interstitial displacement and displacive lattice transformations. Physical Review B, 94, 104109, (2016)
- R. Hameed. Micromechanical modeling of strength of tempered martensitic steels based on crystal plasticity. PhD Thesis, Ruhr-Universität Bochum, (2016)
- N. Alemayehu, I. Steinbach. Phase field modeling of intercalation kinetics: A finite interface dissipation approach. MRS Communications, 6, 270-282, (2016)
- T. Hammerschmidt, J. Koßmann, C. Zenk et al. The role of local chemical composition for TCP phase precipitation in Ni-base and Co-base superalloys. Superalloys 2016: Proceedings of the 13th International Symposium on Superalloys, 89-96, (2016)
- C. Zenk, S. Neumeier, M. Kolb et al. The role of the base element in γ-strengthened cobalt/nickel-base superalloys. Superalloys 2016: Proceedings of the 13th International Symposium on Superalloys, 971-980, (2016)
- O. Shchyglo, T. Hammerschmidt, M. Čák et al. Atomistically informed extended Gibbs energy description for phase-field simulation of tempering of martensitic steel. Materials, 9, 669, (2016)
- J. Wang, R. Janisch, G. Madsen et al. First-principles study of carbon segregation in bcc iron symmetrical tilt grain boundaries. Acta Materialia, 115, 259-268, (2016)
- V. Bhogireddy. Liquid metal induced grain boundary embrittlement: A multi-scale study. PhD Thesis, Ruhr-Universität Bochum, (2016)
- M. Hassani, P. Engels, D. Raabe et al. Localized plastic deformation in a model metallic glass: A survey of free volume and local force distributions. Journal of Statistical Mechanics: Theory and Experiment, 2016, 084006, (2016)
- E. Borukhovich, G. Du, M. Stratmann et al. Microstructure design of tempered martensite by atomistically informed full-field simulation: From quenching to fracture. Materials, 9, 673, (2016)
- C. Teijeiro Barjas, T. Hammerschmidt, R. Drautz et al. Efficient parallelization of analytic bond-order potentials for large-scale atomistic simulations. Computer Physics Communications, 204, 64-73, (2016)
- R. Stern, B. Dongre, G. Madsen. Extrinsic doping of the half-Heusler compounds. Nanotechnology, 27, 334002, (2016)
- J. Leuthold, G. Reglitz, M. Wegner et al. Local texture-microstructure correlation due to deformation localization in ECAP-processed nickel. Materials Science and Engineering A, 669, 196-204, (2016)
- S. Bhattacharya, R. Chmielowski, G. Dennler et al. Novel ternary sulfide thermoelectric materials from high throughput transport and defect calculations. Journal of Materials Chemistry A, 4, 11086-11093, (2016)
- P. Camargos Macieira. Simulation of the microstructure evolution during hot rolling of VDM® alloy 718. Master Thesis, Ruhr-Universität Bochum, (2016)
- G. Sutmann. Green’s function enriched Poisson solver for electrostatics in many-particle systems. Proceedings of the International Conference on Numerical Analysis and Applied Mathematics, 1738, 480092, (2016)
- M. Schröder. Lattice dynamics in hybrid-perovskites. Master Thesis, Ruhr-Universität Bochum, (2016)
- S. Schreiber. Simulation of plastic deformation in α-FeC with analytic bond-order potentials. PhD Thesis, Ruhr-Universität Bochum, (2016)
- S. Abbas. Size effect in mechanical properties of multilayered material by accumulative roll bonding. Master Thesis, Ruhr-Universität Bochum, (2016)
- V. Paidar, M. Čák. Three types of dislocation core structure in B2 alloys. Intermetallics, 73, 21-25, (2016)
- A. Subramanyam. A first principles study of effects of manganese on hydrogen embrittlement of a carbon segregated E5 (310)[00]) grain boundary in α iron. Master Thesis, Ruhr-Universität Bochum, (2016)
- D. Di Stefano, R. Nazarov, T. Hickel et al. First-principles investigation of hydrogen interaction with TiC precipitates in α-Fe. Physical Review B, 93, 184108, (2016)
- A. Breidi, S. Fries, M. Palumbo et al. First-principles modeling of energetic and mechanical properties of Ni–Cr, Ni–Re and Cr–Re random alloys. Computational Materials Science, 117, 45-53, (2016)
- M. Boeff. Micromechanical modelling of fatigue crack initiation and growth. PhD Thesis, Ruhr-Universität Bochum, (2016)
- R. Sivanesapillai. Pore-scale study of non-Darcian fluid flow in porous media using smoothed-particle hydrodynamics. PhD Thesis, Ruhr-Universität Bochum, (2016)
- I. Binkowski, J. Horbach, S. Divinski et al. Shear band relaxation in a deformed bulk metallic glass. Acta Materialia, 109, 330-340, (2016)
- A. Breidi, S. Fries, A. Ruban. Ideal compressive strength of fcc Co, Ni, and Ni-rich alloys along the ⟨001⟩ direction: A first-principles study. Physical Review B, 93, 144106, (2016)
- B. Reinholz, S. Brinckmann, A. Hartmaier et al. Influence of the twin microstructure on the mechanical properties in magnetic shape memory alloys. Acta Materialia, 108, 197-206, (2016)
- R. Halver, G. Sutmann. Multi-threaded construction of neighbour lists for particle systems in OpenMP. Parallel Processing and Applied Mathematics, 9574, 153-165, (2016)
- K. Cheng, L. Zhang, C. Schwarze et al. Phase-field simulation of liquid phase migration in the WC–Co system during liquid phase sintering. International Journal of Materials Research, 107, 309-314, (2016)
- A. Bialon, T. Hammerschmidt, R. Drautz. Three-parameter crystal-structure prediction for sp-d‐valent compounds. Chemistry of Materials, 28, 2550-2556, (2016)
- E. Turchenko. Automated data proceeding and its application to creep experiments. Master Thesis, Ruhr-Universtität Bochum, (2016)
- E. Turchenko. Automated data proceeding and its application to creep experiments. Master thesis, (2016)
- S. Neumeier, H. U. Rehman, J. Neuner et al. Diffusion of solutes in fcc cobalt investigated by diffusion couples and first principles kinetic Monte Carlo. Acta Materialia, 106, 304-312, (2016)
- P. Veluvali. Influence of interstitial defects on the structural and mechanical properties of lamellar TiAl alloys. Master Thesis, Ruhr-Universität Bochum, (2016)
- M. Dakshinamurthy. Micromechanical modeling of the effect of transformation induced plasticity on crack propagation in multiphase steels. Master Thesis, Ruhr-Universität Bochum, (2016)
- C. Schwarze, R. Darvishi Kamachali, I. Steinbach. Phase-field study of Zener drag and pinning of cylindrical particles in polycrystalline materials. Acta Materialia, 106, 59-65, (2016)
- Y. Buranova, H. Rösner, S. Divinski et al. Quantitative measurements of grain boundary excess volume from HAADF-STEM micrographs. Acta Materialia, 106, 367-373, (2016)
- M. Kanani, A. Hartmaier, R. Janisch. Stacking fault based analysis of shear mechanisms at interfaces in lamellar TiAl alloys. Acta Materialia, 106, 208-218, (2016)
- Y. Di, J. Lian, B. Wu et al. The second blind Sandia Fracture Challenge: Improved MBW model predictions for different strain rates. International Journal of Fracture, 198, 149-165, (2016)
- B. L. Boyce, S. L. B. Kramer, T. R. Bosiljevac et al. The second Sandia Fracture Challenge: Predictions of ductile failure under quasi-static and moderate-rate dynamic loading. International Journal of Fracture, 198, 5-100, (2016)
- I. Lopez-Galilea, J. Koßmann, A. Kostka et al. The thermal stability of topologically close-packed phases in the single-crystal Ni-base superalloy ERBO/1. Journal of Materials Science, 51, 2653-2664, (2016)
- S. Surendralal. Automated calculations for charged point defects in magnesium oxide and iron oxides. Master Thesis, Ruhr-Universität Bochum, (2016)
- G. Díaz Leines, J. Rogal. Comparison of minimum-action and steepest-descent paths in gradient systems. Physical Review E, 93, 022307, (2016)
- C. Teijeiro Barjas, T. Hammerschmidt, B. Seiser et al. Complexity analysis of simulations with analytic bond-order potentials. Modelling and Simulation in Materials Science and Engineering, 24, 025008, (2016)
- T. Hammerschmidt, A. Ladines, J. Koßmann et al. Crystal-structure analysis with moments of the density-of-states: Application to intermetallic topologically close-packed phases. Crystals, 6, 18, (2016)
- R. Chmielowski, S. Bhattacharya, W. Xie et al. High thermoelectric performance of tellurium doped paracostibite. Journal of Materials Chemistry C, 15, 3094-3100, (2016)
- C. Zenk, S. Neumeier, N. M. Engl et al. Intermediate Co/Ni-base model superalloys — Thermophysical properties, creep and oxidation. Scripta Materialia, 112, 83-86, (2016)
- H. Hajiyani. Mechanical and electrochemical properties of mixed transition metal oxides in cathode materials. PhD Thesis, Ruhr-Universität Bochum, (2016)
- A. Asaadi. Molecular dynamics simulations of nano-indentation in lamellar γ-γ' microstructures of TiAl. Master Thesis, Ruhr-Universität Bochum, (2016)
- V. Begum. Parallelization of Wolff single-cluster algorithm in 2D Ising model with MPI. Master Thesis, Ruhr-Universität Bochum, (2016)
- S. Sampath, R. Rementeria, X. Huang et al. The role of silicon, vacancies, and strain in carbon distribution in low temperature bainite. Journal of Alloys and Compounds, 673, 289-294, (2016)
- M. Wambach, R. Stern, S. Bhattacharya et al. Unraveling self-doping effects in thermoelectric TiNiSn half-Heusler compounds by combined theory and high-throughput experiments. Advanced Electronic Materials, 2, 1500208, (2016)
- S. Gao. 3D discrete dislocation dynamics study on fundamental creep mechanisms in single crystal superalloys. PhD Thesis, Ruhr-Universität Bochum, (2016)
- P. Engels. A multi-phase-field simulation approach incorprating finite, elasto-plastic deformations. PhD Thesis, Ruhr-Universität Bochum, (2016)
- J. Duncan, A. Harjunmaa, R. Terrell et al. Collective atomic displacements during complex phase boundary migration in solid-solid phase transformations. Physical Review Letters, 116, 035701, (2016)
- I. S. Golovin, V. V. Palacheva, A. I. Bazlov et al. Diffusionless nature of D03 → L12 transition in Fe3Ga alloys. Journal of Alloys and Compounds, 656, 897-902, (2016)
- N. Nollmann, I. Binkowski, V. Schmidt et al. Impact of micro-alloying on the plasticity of Pd-based bulk metallic glasses. Scripta Materialia, 111, 119-122, (2016)
- X. Pang, R. Janisch, A. Hartmaier. Interplanar potential for tension-shear coupling at grain boundaries derived from ab initio calculations. Modelling and Simulation in Materials Science and Engineering, 24, 015007, (2016)
- T. Lyu. Microstructure and micromechanical modelling of AI-Cu dissimilar material connections. Master Thesis, Ruhr-Universität Bochum, (2016)
- C. Steger. Optimierung des Lagenaufbaus für ein Monocoque in Sandwichbauweise. Master Thesis, Ruhr-Universität Bochum, (2016)
- S. Papenkort. Simulation von Ermüdungsrisswachstum in polykristallinen Mikrostrukturen unter zyklischer Belastung / Simulation of fatigue crack growth in polycrystalline microstructures under cyclic loading conditions. Master Thesis, Ruhr-Universität Bochum, (2016)
- V. Kulitskiy, S. Malopheyev, Y. Buranova et al. Ultrafine-grained structure produced by FSW and ECAP in Al-Mg-Sc-Zr alloy: Comparison. Materials Science Forum, 838, 379-384, (2016)
2015
- L. Poggenpohl. Entwicklung eines mechanischen Ersatzmodells zur Beschreibung gesinterter Keramiken. Master Thesis, Ruhr-Universität Bochum, (2015)
- J. Görler, S. Brinckmann, O. Shchyglo et al. Gamma-channel stabilization mechanism in Ni-base superalloys. Philosophical Magazine Letters, 95, 519-525, (2015)
- D. Novokshanov, B. Döbereiner, M. Sharaf et al. A new model for upper shelf impact toughness assessment with a computationally efficient parameter identification algorithm. Engineering Fracture Mechanics, 148, 281-303, (2015)
- D. C. Ma, B. Grabowski, F. Körmann et al. Ab initio thermodynamics of the CoCrFeMnNi high entropy alloy: Importance of entropy contributions beyond the configurational one. Acta Materialia, 100, 90-97, (2015)
- E. Borukhovich. Consistent coupling of geometrically non-linear finite deformation with alloy chemistry and diffusion within the phase-field framework. PhD Thesis, Ruhr-Universität Bochum, (2015)
- C. P. Race, R. Hadian, J. von Pezold et al. Mechanisms and kinetics of the migration of grain boundaries containing extended defects. Physical Review B, 92, 174115, (2015)
- D. Yan. Micromechanically guided design of graded ultra-fine-grained dual-phase steel. PhD Thesis, Ruhr-Universität Bochum, (2015)
- A. Monas, P. Bloembergen, W. Dong et al. Simulations of the eutectic transformations in the platinum–carbon system. International Journal of Thermophysics, 36, 3366-3383, (2015)
- X. Zhang. Structural transformations in Fe-C alloys: From atomistic simulations to a microscopic understanding. PhD Thesis, Ruhr-Universität Bochum, (2015)
- D. Ma, M. Friák, J. von Pezold et al. Ab initio study of compositional trends in solid solution strengthening in metals with low Peierls stress. Acta Materialia, 98, 367-376, (2015)
- S. Kenmoe. Ab initio study of the low-index non-polar zinc oxide surfaces in contact with water: From single molecules to multilayers. PhD Thesis, Ruhr-Universität Bochum, (2015)
- M. Kanani. Correlation of deformation mechanisms and atomistic structure of interfaces in lamellar TiAl alloys. PhD Thesis, Ruhr-Universität Bochum, (2015)
- W. S. Ko, B. Grabowski, J. Neugebauer. Development and application of a Ni-Ti interatomic potential with high predictive accuracy of the martensitic phase transition. Physical Review B, 92, 134107, (2015)
- M. Boeff, F. Gutknecht, P. Engels et al. Formulation of nonlocal damage models based on spectral methods for application to complex microstructures. Engineering Fracture Mechanics, 147, 373-387, (2015)
- K. Bhogireddy, C. Hüter, J. Neugebauer et al. From wetting to melting along grain boundaries using phase field and sharp interface methods. Computational Materials Science, 108, 293-300, (2015)
- M. Naderi, M. Peterlechner, E. Schafler et al. Kinetic, volumetric and structural effects induced by liquid Ga penetration into ultrafine grained Al. Acta Materialia, 99, 196-205, (2015)
- E. Borukhovich, P. Engels, J. Mosler et al. Large deformation framework for phase-field simulations at the mesoscale. Computational Materials Science, 108, 367-373, (2015)
- T. Wang, C. Begau, G. Sutmann et al. Large scale molecular dynamics simulation of microstructure formation during thermal spraying of pure copper. Surface and Coatings Technology, 280, 72-80, (2015)
- B. Dongre. The effect of a vacancy on the thermal conductivity of Stillinger-Weber silicon. Master Thesis, Ruhr-Universität Bochum, (2015)
- A. Gießmann. The influence of stress enhanced diffusion on the growth of pearlite in eutectoid plain carbon steel. PhD Thesis, Ruhr-Universität Bochum, (2015)
- R. Drautz, T. Hammerschmidt, M. Čák et al. Bond-order potentials: Derivation and parameterization for refractory elements. Modelling and Simulation in Materials Science and Engineering, 23, 074004, (2015)
- P. Vasconcelos, A. Gießmann, J. Dias-de-Oliveira et al. Heat treatment analysis of multiphase steels through the use of a coupled phase field and finite element model methodology. Computational Materials Science, 107, 139-150, (2015)
- L.-F. Huang, B. Grabowski, E. McEniry et al. Importance of coordination number and bond length in titanium revealed by electronic structure investigations. Physica Status Solidi B, 252, 1907-1924, (2015)
- M. Golam. Investigation of hydrogen trapping in model alloys with and without internal oxide precipitates. Master Thesis, Ruhr-Universität Bochum, (2015)
- H. Shabbir. Multi scale simulations: Interaction between γ' precipitate and interfacial dislocation in nickel base superalloys. Master Thesis, Ruhr-Universität Bochum, (2015)
- S. Gao, M. Rajendran, M. Fivel et al. Primary combination of phase-field and discrete dislocation dynamics methods for investigating athermal plastic deformation in various realistic Ni-base single crystal superalloy microstructures. Modelling and Simulation in Materials Science and Engineering, 23, 075003, (2015)
- J. Koßmann, T. Hammerschmidt, S. Maisel et al. Solubility and ordering of Ti, Ta, Mo and W on the Al sublattice in L12-Co3Al. Intermetallics, 64, 44-50, (2015)
- Nima H. Siboni, D. Raabe, F. Varnik. Aging in amorphous solids: A study of the first-passage time and persistence time distribution. Europhysics Letters, 111, 48004, (2015)
- N. Winkler, M. Peterlechner, G. Wilde. Controlling crystallization, phase transformation and magnetic properties of amorphous FeNiP by annealing in nano-confinement. Journal of Materials Chemistry C, 3, 7543-7551, (2015)
- C. Park. DFT+U calulations of delithiation at Σ2 tilt grain boundary in Li[Co1/3Ni1/3Mn1/3]O2 cathode material for Lithium-ion battery. Master Thesis, Ruhr-Universität Bochum, (2015)
- A. Monas, O. Shchyglo, S. Kim et al. Divorced eutectic solidification of Mg-Al alloys. JOM, 67, 1805-1811, (2015)
- S. Bhattacharya, G. Madsen. High-throughput exploration of alloying as design strategy for thermoelectrics. Physical Review B, 92, 085205, (2015)
- , I. Steinbach, F. Varnik. Modeling the flow in diffuse interface methods of solidification. Physical Review E, 92, 023303, (2015)
- B. Wu, Y. Yan, S. Münstermann. Modelling of chip breakage in machining process with damage mechanics model. Applied Mechanics and Materials, 784, 411-418, (2015)
- A. Kothapalli. RVE based characterization and homogenization of elasto plastic properties for woven thermoplastic composite materials. Master Thesis, Ruhr-Universität Bochum, (2015)
- M. Q. Jiang, G. Wilde, F. Jiang et al. Understanding ductile-to-brittle transition of metallic glasses from shear-transformation-zone dilatation. Theoretical and Applied Mechanics Letters, 5, 200-204, (2015)
- S. Ramesh Babu. Additive manufacturing of nickel-base superalloys: A phase-field study. Master Thesis, Ruhr-Universität Bochum, (2015)
- A. Monas, O. Shchyglo, D. Höche et al. Dual-scale phase-field simulation of Mg-Al alloy solidification. IOP Conference Series: Materials Science and Engineering, 84, 012069, (2015)
- S. Divinski. Grain boundary diffusion in severe plastically deformed metals: State of the art and unresolved issues. Diffusion Foundations, 5, 57-73, (2015)
- E. Pinatel, M. Palumbo, F. Massimino et al. Hydrogen sorption in the LaNi5-xAlx-H system (0 ≤ x ≤ 1). Intermetallics, 62, 7-16, (2015)
- D. Weygand, M. Mrovec, T. Hochrainer et al. Multiscale simulation of plasticity in bcc metals. Annual Review of Materials Research, 45, 369-390, (2015)
- V. Schmidt, H. Rösner, M. Peterlechner et al. Quantitative measurement of density in a shear band of metallic glass monitored along its propagation direction. Physical Review Letters, 115, 035501, (2015)
- M. Heyn. Evolution of the grain boundary microstructure on tempering of a 2.25Cr1Mo steel. Master Thesis, Ruhr-Universität Bochum, (2015)
- D. Liu, M. Peterlechner, J. Fiebig et al. Grain boundary diffusion and precipitates in B2 Ti−50.2 at.% Ni alloy. Intermetallics, 61, 30-37, (2015)
- A. Kauws. Investigation of mechanical properties of martensite packets using inverse analysis. Master Thesis, Ruhr-Universität Bochum, (2015)
- J. Koßmann, C. H. Zenk, I. Lopez-Galilea et al. Microsegregation and precipitates of an as-cast Co-based superalloy - microstructural characterization and phase stability modelling. Journal of Materials Science, 50, 6329-6338, (2015)
- A. Katre. Modelling thermal transport in nanostructured materials. PhD Thesis, Ruhr-Universität Bochum, (2015)
- A. Gupta. Precipitation kinetics in binary alloys. Master Thesis, Ruhr-Universität Bochum, (2015)
- M. Shepelenko, L. Klinger, E. Rabkin et al. Recovery, recrystallization and diffusion in cold-rolled Ni. International Journal of Materials Research, 106, 554-564, (2015)
- N. Rivas. Sulfidation resistance of Ni-Cr alloys exposed to simulated coal power plant atmospheres. Master Thesis, Ruhr-Universität Bochum, (2015)
- R. Darvishi Kamachali, S. Kim, I. Steinbach. Texture evolution in deformed AZ31 magnesium sheets: Experiments and phase-field study. Computational Materials Science, 104, 193-199, (2015)
- J. Zhang, C. Begau, L. Geng et al. Atomistic investigation of wear mechanisms of a copper bi-crystal. Wear, 332-333, 941-948, (2015)
- T. Chakraborty, A. Hens, S. Kulashrestha et al. Calculation of diffusion coefficient of long chain molecules using molecular dynamics. Physica E, 69, 371-377, (2015)
- R. Darvishi Kamachali, A. Abbondandolo, K. F. Sieburg et al. Geometrical grounds of mean field solutions for normal grain growth. Acta Materialia, 90, 252-258, (2015)
- B. Dutta, T. Hickel, J. Neugebauer et al. Interplay of strain and interdiffusion in Heusler alloy bilayers. Physica Status Solidi RRL, 9, 321-325, (2015)
- T. Wang. Large-scale molecular dynamics simulation of growth, microstructure and properties of thermal-sprayed coatings. PhD Thesis, Ruhr-Universität Bochum, (2015)
- T. Wang. Large-scale molecular dynamics simulation of growth, microstructure and properties of thermal-sprayed coatings. PhD Thesis, Ruhr-Universität Bochum, (2015)
- J. Buenz, K. A. Padmanabhan, G. Wilde. On the applicability of a mesoscopic interface sliding controlled model for understanding superplastic flow in bulk metallic glasses. Intermetallics, 60, 50-57, (2015)
- J. Frenzel, A. Wieczorek, I. Opahle et al. On the effect of alloy composition on martensite start temperatures and latent heats in Ni–Ti-based shape memory alloys. Acta Materialia, 90, 213-231, (2015)
- D. Prokoshkina, L. Klinger, A. Moros et al. Persistence of ultrafast atomic diffusion paths in recrystallizing ultrafine grained Ni. Scripta Materialia, 101, 91-94, (2015)
- B. Grabowski, A. Glensk, T. Hickel et al. Random phase approximation up to the melting point: Impact of anharmonicity and nonlocal many-body effects on the thermodynamics of Au. Physical Review B, 91, 201103, (2015)
- Y.P. Mitrofanov, M. Peterlechner, I. Binkowski et al. The impact of elastic and plastic strain on relaxation and crystallization of Pd–Ni–P-based bulk metallic glasses. Acta Materialia, 90, 318-329, (2015)
- A. Glensk, B. Grabowski, T. Hickel et al. Understanding anharmonicity in the fcc materials: From its origin to ab initio strategies beyond the quasiharmonic approximation. Physical Review Letters, 114, 195901, (2015)
- A. Ladines. Influence of light elements on precipitates of complex phases in steel. PhD Thesis, Ruhr-Universität Bochum, (2015)
- S. Gupta, A. Ma, A. Hartmaier. Investigating the influence of crystal orientation on bending size effect of single crystal beams. Computational Materials Science, 101, 201-210, (2015)
- C. Teijeiro Barjas, T. Hammerschmidt, R. Drautz et al. Parallel bond order potentials for materials science simulations. Proceedings of the 4th International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering, (2015)
- A. Ladines, T. Hammerschmidt, R. Drautz. Structural stability of Fe-based topologically close-packed phases. Intermetallics, 59, 59-67, (2015)
- A. Lange. Ti-Ta based high-temperature shape memory alloy thin films. Master Thesis, Ruhr-Universität Bochum, (2015)
- S. Bhattacharya, N. Gunda, R. Stern et al. Achieving optimum carrier concentrations in p-doped SnS thermoelectrics. Physical Chemistry Chemical Physics, 17, 9161-9166, (2015)
- C. Simon, M. Peterlechner, G. Wilde. Experimental determination of the nucleation rates of undercooled micron-sized liquid droplets based on fast chip calorimetry. Thermochimica Acta, 603, 39-45, (2015)
- L. Sharma. Implementation and comparison of different damage criteria in the framework of crystal plasticity. Master Thesis, Ruhr-Universität Bochum, (2015)
- S. Gao, M. Fivel, A. Ma et al. Influence of misfit stresses on dislocation glide in single crystal superalloys: A three-dimensional discrete dislocation dynamics study. Journal of the Mechanics and Physics of Solids, 76, 276-290, (2015)
- A. Wengert. Initial stages of internal oxidation of iron base alloys in the temperature range of 600°C to 850°C. Master Thesis, Ruhr-Universität Bochum, (2015)
- T. Chakraborty, J. Rogal, R. Drautz. Martensitic transformation between competing phases in Ti-Ta alloys: A solid-state nudged elastic band study. Journal of Physics: Condensed Matter, 27, 115401, (2015)
- M. Tegeler, A. Monas, G. Sutmann. Massively parallel multiphase field simulations. Proceedings of the 4th International Conference on Parallel, Distributed, Grid and Cloud Computing for Engineering, (2015)
- W. Kochański, M. Boeff, Z. Hashemiyan et al. Modelling and numerical simulations of in-air reverberation images for fault detection in medical ultrasonic transducers: A feasibility study. Journal of Sensors, 2015, 796439, (2015)
- R. Chmielowski, D. Pere, C. Bera et al. Theoretical and experimental investigations of the thermoelectric properties of Bi2S3. Journal of Applied Physics, 117, 125103, (2015)
- U. Kaya. Development of simulation methods for characterization and modeling of tribological properties of thin metal sheets. Master Thesis, Ruhr-Universität Bochum, (2015)
- D. Belardinelli, M. Sbragaglia, L. Biferale et al. Fluctuating multicomponent lattice Boltzmann model. Physical Review E, 91, 023313, (2015)
- M. Gross, T. Krüger, F. Varnik. Fluctuations and diffusion in sheared athermal suspensions of deformable particles. Europhysics Letters, 108, 68006, (2015)
- L. Zhang, M. Stratmann, Y. Du et al. Incorporating the CALPHAD sublattice approach of ordering into the phase-field model with finite interface dissipation. Acta Materialia, 88, 156-169, (2015)
- M. Ford, D. Pettifor, R. Drautz. Non-collinear magnetism with analytic bond-order potentials. Journal of Physics: Condensed Matter, 27, 086002, (2015)
- M. Q. Jiang, G. Wilde, L. H. Dai. Origin of stress overshoot in amorphous solids. Mechanics of Materials, 81, 72-83, (2015)
- J. Gehrmann, D. Pettifor, A. Kolmogorov et al. Reduced tight-binding models for elemental Si and N, and ordered binary Si-N systems. Physical Review B, 91, 054109, (2015)
- S. Ayodele, D. Raabe, F. Varnik. Shear-flow-controlled mode selection in a nonlinear autocatalytic medium. Physical Review E, 91, 022913, (2015)
- P. Nörtershäuser, J. Frenzel, A. Ludwig et al. The effect of cast microstructure and crystallography on rafting, dislocation plasticity and creep anisotropy of single crystal Ni-base superalloys. Materials Science and Engineering A, 626, 305-312, (2015)
- L. Morales-Rivas, V. Yardley, C. Capdevila et al. A procedure for indirect and automatic measurement of prior austenite grain size in bainite/martensite microstructures. Journal of Materials Science, 50, 258-267, (2015)
- A. Ma, A. Hartmaier. A study of deformation and phase transformation coupling for TRIP-assisted steels. International Journal of Plasticity, 64, 40-55, (2015)
- C. Begau, G. Sutmann. Adaptive dynamic load-balancing with irregular domain decomposition for particle simulations. Computer Physics Communications, 190, 51-61, (2015)
- G. Reglitz, B. Oberdorfer, N. Fleischmann et al. Combined volumetric, energetic and microstructural defect analysis of ECAP-processed nickel. Acta Materialia, 103, 396-406, (2015)
- B. Sundman, M. Stratmann, L. Zhang et al. Computational thermodynamics and its applications in materials science. Materials China, 34, 15-29, (2015)
- S. Divinski, G. Reglitz, I. S. Golovin et al. Effect of heat treatment on diffusion, internal friction, microstructure and mechanical properties of ultra-fine-grained nickel severely deformed by equal-channel angular pressing. Acta Materialia, 82, 11-21, (2015)
- A. Katre, A. Togo, I. Tanaka et al. First principles study of thermal conductivity cross-over in nanostructured zinc-chalcogenides. Journal of Applied Physics, 117, 045102, (2015)
- O. Güvenc, F. Roters, T. Hickel et al. ICME for crashworthiness of TWIP steels: From ab initio to the crash performance. JOM, 67, 120-128, (2015)
- P. Schwittek. Micromechanical and continuum modeling of hydrogen assisted steel degradation. PhD Thesis, Ruhr-Universität Bochum, (2015)
- S. Gupta. Micromechanical modeling of martensitic phase transformation in steels based on nonlocal crystal plasticity. PhD Thesis, Ruhr-Universität Bochum, (2015)
- P. Wollgramm, H. Buck, K. Neuking et al. On the role of Re in the stress and temperature dependence of creep of Ni-base single crystal superalloys. Materials Science and Engineering A, 628, 382-395, (2015)
- B. Sundman, U. Kattner, M. Palumbo et al. OpenCalphad - a free thermodynamic software. Integrating Materials and Manufacturing Innovation, 4, 1, (2015)
- A. Hariri. Phase transitions in high manganese steels: Simulation and experiment. Master Thesis, Ruhr-Universität Bochum, (2015)
- U. Unije. Simulation of transport processes through asymmetric gas separation membrane. Master Thesis, Ruhr-Universität Bochum, (2015)
- X. Zhang, T. Hickel, J. Rogal et al. Structural transformations among austenite, ferrite and cementite in Fe-C alloys: A unified theory based on ab initio simulations. Acta Materialia, 99, 281-289, (2015)
2014
- N. Gunda. Coarse grained lattice dynamics using compressive sensing. Master Thesis, Ruhr-Universität Bochum, (2014)
- A. Breidi, M. Andasmas, J. Crivello et al. Experimental and computed phase diagrams of the Fe-Re system. Journal of Physics: Condensed Matter, 26, 485402, (2014)
- L. Klein, A. Zendegani, M. Palumbo et al. First approach for thermodynamic modelling of the high temperature oxidation behaviour of ternary γ strengthened Co-Al-W superalloys. Corrosion Science, 89, 1-5, (2014)
- F. Farahpour, M. Ejtehadi, F. Varnik. Polyelectrolytes polarization in nonuniform electric fields. International Journal of Modern Physics C, 25, 1 - 9, (2014)
- S. Schuwalow, J. Rogal, R. Drautz. Vacancy mobility and interaction with transition metal solutes in Ni. Journal of Physics: Condensed Matter, 26, 485014, (2014)
- J. Lian, N. Vajragupta, S. Münstermann et al. A method to quantitatively upscale the damage initiation of dual-phase steels under various stress states from microscale to macroscale. Computational Materials Science, 94, 245–257, (2014)
- M. Kanani, A. Hartmaier, R. Janisch. Interface properties in lamellar TiAl microstructures from density functional theory. Intermetallics, 54, 154-163, (2014)
- M. Sharaf, P. Kucharczyk, N. Vajragupta et al. Modeling the microstructure influence on fatigue life variability in structural steels. Computational Materials Science, 94, 258-272, (2014)
- A. Zendegani. Modelling the morphological instability of the oxidation front in binary alloys by phase-field. Master Thesis, Ruhr-Universität Bochum, (2014)
- N. Vajragupta, P. Wechsuwanmanee, J. Lian et al. The modeling scheme to evaluate the influence of microstructure features on microcrack formation of DP-steel: the artificial microstructure model and its application to predict the strain hardening behavior. Computational Materials Science, 95, 198-213, (2014)
- T. Schablitzki. Atomistic study of kinetic processes of solid-state phase transformation in FeCr with topological fingerprints. PhD Thesis, Ruhr-Universität Bochum, (2014)
- K. Chockalingam, R. Janisch, A. Hartmaier. Coupled atomistic-continuum study of the effects of C atoms at α-Fe dislocation cores. Modelling and Simulation in Materials Science and Engineering, 22, 075007, (2014)
- U. Tutsch, B. Wolf, S. Wessel et al. Evidence of a field-induced Berezinskii-Kosterlitz-Thouless scenario in a two-dimensional spin-dimer system. Nature Communications, 5, 5169, (2014)
- V. Perekrestov, A. Kornyushchenko, Y. Kosminska et al. Formation of porous low-dimensional nickel systems during near-equilibrium condensation in ultrapure inert environment. Applied Surface Science, 316, 155-162, (2014)
- G. Laplanche, J. Pfetzing-Micklich, G. Eggeler. Sudden stress-induced transformation events during nanoindentation of NiTi shape memory alloys. Acta Materialia, 78, 144-160, (2014)
- F. Körmann, B. Grabowski, B. Dutta et al. Temperature dependent magnon-phonon coupling in bcc Fe from theory and experiment. Physical Review Letters, 113, 165503, (2014)
- H. Sözen. Ab initio investigation on the energetics and kinetics of defects in Fe-Al alloys. Master Thesis, Ruhr-Universität Bochum, (2014)
- M.Q. Jiang, G. Wilde, J.H. Chen et al. Cryogenic-temperature-induced transition from shear to dilatational failure in metallic glasses. Acta Materialia, 77, 248-257, (2014)
- J. Millán, S. Sandlöbes, A. Al-Zubi et al. Designing Heusler nanoprecipitates by elastic misfit stabilization in Fe-Mn maraging steels. Acta Materialia, 76, 94-105, (2014)
- M. Wegner, J. Leuthold, M. Peterlechner et al. Grain boundary and triple junction diffusion in nanocrystalline copper. Journal of Applied Physics, 116, 093514, (2014)
- G. Wilde. Physical metallurgy of nanocrystalline metals. Physical Metallurgy, 2707-2805, (2014)
- M. Boeff, A. Ma, A. Hartmaier. Plastic deformation modelling of tempered martensite steel block structure by a nonlocal crystal plasticity model. Theoretical and Applied Mechanics Letters, 4, 051007, (2014)
- M.Q. Jiang, G. Wilde, C.B. Qu et al. Wavelike fracture pattern in a metallic glass: a Kelvin-Helmholtz flow instability. Philosophical Magazine Letters, 94, 669-677, (2014)
- J. Mosler, O. Shchyglo, H. Montazer Hojjat. A novel homogenization method for phase field approaches based on partial rank-one relaxation. Journal of the Mechanics and Physics of Solids, 68, 251-266, (2014)
- L. Govinda Sharma. Effect of martensite fraction on cooling rate and grain size. Master Thesis, Ruhr-Universität Bochum, (2014)
- J. Bokeloh, G. Wilde. High-precision nucleation rate measurements for higher-melting metals. Journal of Metals, 66, 1512-1519, (2014)
- T. Hickel, S. Sandlöbes, R.K.W. Marceau et al. Impact of nanodiffusion on the stacking fault energy in high-strength steels. Acta Materialia, 75, 147-155, (2014)
- N. Alemayehu. Intercalation kinetics of battery- and related materials. PhD Thesis, Ruhr-Universität Bochum, (2014)
- M. Ilyas. Lagrangian dynamics simulation of cubic to tetragonal martensitic phase transformations. Master Thesis, Ruhr-Universität Bochum, (2014)
- M. Rajendran, O. Shchyglo, I. Steinbach. Large scale 3-D phase-field simulation of coarsening in Ni-base superalloys. MATEC Web of Conferences: EUROSUPERALLOYS 2014 – 2nd European Symposium on Superalloys and their Applications, 14, 11001, (2014)
- R. Sivanesapillai, H. Steeb, A. Hartmaier. Transition of effective hydraulic properties from low to high Reynolds number flow in porous media. Geophysical Research Letters, 41, 4920-4928, (2014)
- A. Paul, T. Laurila, V. Vuorinen et al. . Thermodynamics, diffusion and the Kirkendall effect in solids, (2014)
- H. Sözen. Ab initio investigations on the energetics and kinetics of defects in Fe-Al Alloys. Master Thesis, Ruhr-Universität Bochum, (2014)
- V. Yardley, E. Payton. Austenite-martensite/bainite orientation relationship: characterisation parameters and their application. Materials Science and Technology, 30, 1125-1130, (2014)
- H. Rösner, M. Peterlechner, C. Kübel et al. Density changes in shear bands of a metallic glass determined by correlative analytical transmission electron microscopy. Ultramicroscopy, 142, 1-9, (2014)
- A. Tahir, R. Janisch, A. Hartmaier. Hydrogen embrittlement of a carbon segregated Σ5(310)[001] symmetrical tilt grain boundary in α-Fe. Material Science and Engineering A, 612, 462-467, (2014)
- C. Bera, S. Jacob, I. Opahle et al. Integrated computational materials discovery of silver doped tin sulfide as a thermoelectric material. Physical Chemistry Chemical Physics, 16, 19894-19899, (2014)
- S. Cosentino, S. Knebel, S. Mirabella et al. Light absorption in Ge nanoclusters embedded in SiO2: comparison between magnetron sputtering and sol-gel synthesis. Applied Physics A, 116, 233-241, (2014)
- S. Mandal, S. Lang, M. Gross et al. Multiple reentrant glass transitions in confined hard-sphere glasses. Nature Communications, 5, 4435, (2014)
- S. Urazhdin, V. E. Demidov, H. Ulrichs et al. Nanomagnonic devices based on the spin transfer torque. Nature Nanotechnology, 9, 509-513, (2014)
- Y. Zhang, C. Simon, T. Volkmann et al. Nucleation transitions in an undercooled Cu70Co30 immiscible alloy. Applied Physics Letters, 105, 041908, (2014)
- Y. Zhang, J. Gao, H. Yasuda et al. Particle size distribution and composition in phase-separated Cu75Co25 alloys under various magnetic fields. Scripta Materialia, 82, 5-8, (2014)
- V. Sai Pavan Bhogireddy, C. Hüter, J. Neugebauer et al. Phase-field modeling of grain-boundary premelting using obstacle potentials. Physical Review E, 90, 012401, (2014)
- M. Palumbo, S. Fries, A. Dal Corso et al. Reliability evaluation of thermophysical properties from first-principles calculations. Journal of Physics: Condensed Matter, 26, 335401, (2014)
- M. Ghasemi, B. Sundman, S. Fries et al. The thermodynamic assessment of the Au-In-Ga system. Journal of Alloys and Compounds, 600, 178–185, (2014)
- I. Eremin, J. Knolle, R. M. Fernandes et al. Antiferromagnetism in iron-based superconductors: selection of magnetic order and quasiparticle interference. Journal Of The Physical Society Of Japan, 83, 061015, (2014)
- G. Dennler, R. Chmielowski, S. Jacob et al. Are binary copper sulfides/selenides really new and promising thermoelectric materials?. Advanced Energy Materials, 4, 1301581, (2014)
- P. Schumacher, M. Reich, V. Mohles et al. Correlation between supersaturation of solid solution and mechanical behaviour of two binary Al-Si-alloys. Materials Science Forum: Proceedings of the Aluminium Alloys 2014 - ICAA14, 794-796, 508-514, (2014)
- B. Reinholz. Discrete disclination dynamics: microstructure evolution in Ni-Mn-Ga shape-memory alloys. PhD Thesis, Ruhr-Universität Bochum, (2014)
- S. Roy, S. Prasad, S. Divinski et al. Diffusion pattern in MSi2 and M5Si3 silicides in group VB (M = V, Nb, Ta) and VIB (M = Mo, W) refractory metal-silicon systems. Philosophical Magazine, 94, 1508-1528, (2014)
- D. Prokoshkina, L. Klinger, A. Moros et al. Effect of recrystallization on diffusion in ultrafine-grained Ni. Acta Materialia, 69, 314-325, (2014)
- Y. Zhang, Z. Wu, M. Wang et al. Effect of undercooling on particle size distribution in phase separated Cu75Co25-xMx (M = Ni, Fe) alloys with low M content. Journal of Alloys and Compounds, 596, 55-57, (2014)
- A. Janghorban, J. Pfetzing-Micklich, J. Frenzel et al. Investigation of the thin-film phase diagram of the Cr-Ni-Re system by high-throughput experimentation. Advanced Engineering Materials, 16, 588-593, (2014)
- P. Xiao, D. Sheppard, J. Rogal et al. Solid-state dimer method for calculating solid-solid phase transitions. The Journal of Chemical Physics, 140, 174104, (2014)
- R. Nazarov, T. Hickel, J. Neugebauer. Ab initio study of H-vacancy interactions in fcc metals: implications for the formation of superabundant vacancies. Physical Review B, 89, 144108, (2014)
- M. Čák, T. Hammerschmidt, J. Rogal et al. Analytic bond-order potentials for the bcc refractory metals Nb, Ta, Mo and W. Journal of Physics: Condensed Matter, 26, 195501, (2014)
- M. Palumbo, S. Fries, A. Pasturel et al. Anharmonicity, mechanical instability, and thermodynamic properties of the Cr-Re σ-phase. The Journal of Chemical Physics, 140, 144502, (2014)
- R. Drautz, I. Steinbach. Applications of scale-bridging to computational materials design. Modelling and Simulation in Materials Science and Engineering, 22, 030201, (2014)
- J. Amodeo, C. Begau, E. Bitzek. Atomistic simulations of compression tests on Ni3Al nanocubes. Materials Research Letters, 2, 140-145, (2014)
- M. Ford, R. Drautz, T. Hammerschmidt et al. Convergence of an analytic bond-order potential for collinear magnetism in Fe. Modelling and Simulation in Materials Science and Engineering, 22, 034005, (2014)
- F. Varnik, S. Mandal, V. Chikkadi et al. Correlations of plasticity in sheared glasses. Physical Review E, 89, 1 - 6, (2014)
- R. Darvishi Kamachali, E. Borukhovich, N. Hatcher et al. DFT-supported phase-field study on the effect of mechanically driven fluxes in Ni4Ti3 precipitation. Modelling and Simulation in Materials Science and Engineering, 22, 034003, (2014)
- G. Wilde. Early stages of crystal formation in glass-forming metallic alloys. Glass – selected properties and crystallization, 95-135, (2014)
- Y.P. Mitrofanov, M. Peterlechner, S. Divinski et al. Impact of plastic deformation and shear band formation on the boson heat capacity peak of a bulk metallic glass. Physical Review Letters, 112, 135901, (2014)
- E. Borukhovich, P. Engels, T. Böhlke et al. Large strain elasto-plasticity for diffuse interface models. Modelling and Simulation in Materials Science and Engineering, 22, 034008, (2014)
- J. Bünz, T. Brink, K. Tsuchija et al. Low temperature heat capacity of a severely deformed metallic glass. Physical Review Letters, 112, 135501, (2014)
- J. Drain, R. Drautz, D. Pettifor. Magnetic analytic bond-order potential for modeling the different phases of Mn at zero Kelvin. Physical Review B, 89, 134102, (2014)
- S. V. Madge, A. Caron, R. Gralla et al. Novel W-based metallic glass with high hardness and wear resistance. Intermetallics, 47, 6-10, (2014)
- G. Laplanche, J. Pfetzing-Micklich, G. Eggeler. Orientation dependence of stress-induced martensite formation during nanoindentation in NiTi shape memory alloys. Acta Materialia, 68, 19-31, (2014)
- N. Hatcher, G. Madsen, R. Drautz. Parameterized electronic description of carbon cohesion in iron grain boundaries. Journal of Physics: Condensed Matter, 26, 145502, (2014)
- H. Kim, S. Kim, W. Dong et al. Phase-field modeling for 3D grain growth based on a grain boundary energy database. Modelling and Simulation in Materials Science and Engineering, 22, 034004, (2014)
- F. Falsafi. Thermophysical properties of Ti and Ni-Ti alloys: first-principle calculations compared to evaluated emperimental results. Master Thesis, Ruhr-Universität Bochum, (2014)
- T. Wang, G. Madsen, A. Hartmaier. Atomistic study of the influence of lattice defects on the thermal conductivity of silicon. Modelling and Simulation in Materials Science and Engineering, 22, 035011, (2014)
- S. Divinski, G. Reglitz, M. Peterlechner et al. Effect of pinning by an orientation gradient on the thermal stability of ultrafine grained Ni produced by equal channel angular pressing. Journal of Applied Physics, 115, 113503, (2014)
- T. Katiyar. Phase-field study of mechanically driven grain growth. Master Thesis, Ruhr-Universität Bochum, (2014)
- S. Roy, S. Divinski, A. Paul. Reactive diffusion in the Ti-Si system and the significance of the parabolic growth constant. Philosophical Magazine, 94, 683-699, (2014)
- M. Gross, T. Krüger, F. Varnik. Rheology of dense suspensions of elastic capsules: normal stresses, yield stress, jamming and confinement effects. Soft Matter, 10, 4360-4372, (2014)
- A. Glensk, B. Grabowski, T. Hickel et al. Breakdown of the Arrhenius Law in describing vacancy formation energies: the importance of local anharmonicity revealed by ab initio thermodynamics. Physical Review X, 4, 011018, (2014)
- Y. Zhou, Z. Yang, T. Wang et al. Crack propagation behaviours at Cu/SiC interface by molecular dynamics simulation. Computational Materials Science, 82, 17-25, (2014)
- H. Emmerich, P. Virnau, G. Wilde et al. Heterogeneous nucleation and microstructure formation: steps towards a system and scale bridging understanding. European Physical Journal Special Topics, 223, 337-346, (2014)
- J. Zhang, R. Rynko, J. Frenzel et al. Ingot metallurgy and microstructural characterization of Ti–Ta alloys. International Journal of Materials Research, 105, 156-167, (2014)
- M. Addis. Lattice Boltzmann studies of non-Newtonian fluids. Master Thesis, Ruhr-Universität Bochum, (2014)
- J. Bokeloh, G. Wilde, R. E. Rozas et al. Nucleation barriers for the liquid-to-crystal transition in simple metals: experiment vs. simulation. European Physical Journal Special Topics, 223, 511-526, (2014)
- M. M. Franke, R. Singer, I. Steinbach. Tertiary dendritic instability in late stage solidification of Ni-based superalloys. Modelling and Simulation in Materials Science and Engineering, 22, 025026, (2014)
- A. S. Makarov, V. A. Khonik, G. Wilde et al. "Defect"-induced heat flow and shear modulus relaxation in a metallic glass. Intermetallics, 44, 106-109, (2014)
- T. Hickel, U. Kattner, S. Fries. Computational thermodynamics: recent developments and future potential and prospects. Physica Status Solidi B, 251, 9-13, (2014)
- A. Tahir. Development and validation of a scale-bridging method for simulation of intergranular fracture in body-centered cubic metals. PhD Thesis, Ruhr-Universität Bochum, (2014)
- J. Pfetzing-Micklich, N. Wieczorek, T. Simon et al. Direct microstructural evidence for the stress induced formation of martensite during nanoindentation of NiTi. Materials Science and Engineering A - Structural Material Properties, 591, 33-37, (2014)
- M. Palumbo, S. Fries, T. Hammerschmidt et al. First-principles-based phase diagrams and thermodynamic properties of TCP phases in Re-X systems (X = Ta, V, W) . Computational Materials Science, 81, 433-445, (2014)
- T. Hammerschmidt, I.A. Abrikosov, D. Alfe et al. Including the effects of pressure and stress in thermodynamic functions. Physica Status Solidi B, 251, 81-96, (2014)
- F. Körmann, A. Breidi, S. Dudarev et al. Lambda transitions in materials science: recent advances in CALPHAD and first-principles modelling. Physica Status Solidi B, 251, 53-80, (2014)
- J. Görler. Mesoscopic simulation of the influence of misfit dislocations on the morphology of the γ′-phase in Ni-Base superalloys. Master Thesis, Ruhr-Universität Bochum, (2014)
- J. Heyer, S. Brinckmann, J. Pfetzing-Micklich et al. Microshear deformation of gold single crystals. Acta Materialia, 62, 225-238, (2014)
- C. Begau, A. Hartmaier. Microstructural characterization of shape memory alloys on the atomic scale. TMS 2014 Supplemental Proceedings, 247-256, (2014)
- L. Bjerg, B. B. Iversen, G. Madsen. Modeling the thermal conductivity of the zinc antimonides ZnSb and Zn4Sb3. Physical Review B, 89, 024304, (2014)
- P. Engels, C. Begau, S. Gupta et al. Multiscale modelling of nanoindentation: from atomistic to continuum models. Nanomechanical analysis of high performance materials, 203, 285-322, (2014)
- A. Ma, A. Hartmaier. On the influence of isotropic and kinematic hardening caused by strain gradients on the deformation behaviour of polycrystals. Philosophical Magazine, 94, 125-140, (2014)
- J. Rogal, S. V. Divinski, M. Finnis et al. Perspectives on point defect thermodynamics. Physica Status Solidi B, 251, 97-129, (2014)
- W. Arif. Superalloy single crystal creep deformation modelling by crystal plasticity finite element method. Master Thesis, Ruhr-Universität Bochum, (2014)
- R. Stern, F. Effenberger, H. Fichtner et al. The space-fractional diffusion-advection equation: analytical solutions and critical assessment of numerical solutions. Fractional Calculus and Applied Analysis, 17, 171-190, (2014)
- M. Palumbo, B. Burton, A. Costa e Silva et al. Thermodynamic modelling of crystalline unary phases. Physica Status Solidi B, 251, 14-32, (2014)
2013
- W. Song, J. von Appen, P. Choi et al. Atomic-scale investigation of ε and θ precipitates in bainite in 100Cr6 bearing steel by atom probe tomography and ab initio calculations. Acta Materialia, 61, 7582-7590, (2013)
- R. Mathieu, N. Dupin, J. Crivello et al. CALPHAD description of the Mo–Re system focused on the sigma phase modelling. CALPHAD, 43, 18-31, (2013)
- J. Olbricht, A. Yawny, J. L. Pelegrina et al. Characteristics of the stress-induced formation of R-phase in ultrafine-grained NiTi shape memory wire. Journal of Alloys and Compounds, 579, 249-252, (2013)
- A. Behler, N. Teichert, B. Dutta et al. Thickness dependent exchange bias in martensitic epitaxial Ni-Mn-Sn thin films. AIP Advances, 3, 122112, (2013)
- M. S. Schmøkel, L. Bjerg, F. K. Larsen et al. Comparative study of X-ray charge density data on CoSb3. Acta. Cryst. Sect. A, 69, 570, (2013)
- M. Wegner, J. Leuthold, M. Peterlechner et al. Percolating porosity in ultrafine grained copper processed by high pressure torsion. Journal of Applied Physics, 114, 183509, (2013)
- R. Darvishi Kamachali, E. Borukhovich, O. Shchyglo et al. Solutal gradients in strained equilibrium. Philosophical Magazine Letters, 93, 680-687, (2013)
- T. Hammerschmidt, A. Bialon, D. Pettifor et al. Topologically close-packed phases in binary transition-metal compounds: matching high-throughput ab initio calculations to an empirical structure map. New Journal of Physics, 15, 115016, (2013)
- U. Preiss, E. Borukhovich, N. Alemayehu et al. A permeation model for the electrochemical interface . Modelling and Simulation in Materials Science and Engineering, 21, 074006, (2013)
- A. Tahir, R. Janisch, A. Hartmaier. Ab initio calculation of traction separation laws for a grain boundary in molybdenum with segregated C impurites. Modelling and Simulation in Materials Science and Engineering, 21, 16, (2013)
- H. Hajiyani, U. Preiss, R. Drautz et al. High-throughput ab initio screening of binary solid solutions in olivine phosphates for Li-ion battery cathodes. Modelling and Simulation in Materials Science and Engineering, 21, 074004, (2013)
- I. Opahle, A. Parma, E. McEniry et al. High-throughput study of the structural stability and thermoelectric properties of transition metal silicides. New Journal of Physics, 15, 105010, (2013)
- W. Song, P. Choi, G. Inden et al. On the spheroidized carbide dissolution and elemental partitioning in high carbon bearing steel 100Cr6. Metallurgical and Materials Transactions A, 1, 1, (2013)
- M. Stratmann. Simulation of vanadium carbides in microalloyed steel. Simulation of vanadium carbides in microalloyed steel, (2013)
- W. Beichel, U. Preiss, B. Benkmil et al. Temperature dependent crystal structure analyses and ion volume determinations of organic salts. Journal of Inorganic and General Chemistry, 639, 2153–2161, (2013)
- F. Körmann, B. Grabowski, P. Söderlind et al. Thermodynamic modelling of chromium: strong and weak magnetic coupling. Journal of Physics: Condensed Matter, 25, 425401, (2013)
- J. Lian, M. Sharaf, P. Kucharczyk et al. A complete damage model associated with localized and diffuse necking for AHSS Sheet. Proceedings of the 6th Forming Technology Forum, (2013)
- J. Neugebauer, T. Hickel. Density functional theory in materials science. WIREs Computational Molecular Science, 3, 438-448, (2013)
- S. Münstermann, J. Lian, N. Vajragupta. Evaluation of the cold formability of multiphase steels by damage mechancis approaches. Materials Testing, 55, 628-635, (2013)
- J. Zhang, A. Hartmaier, Y. Wei et al. Mechanisms of anisotropic friction in nanotwinned Cu revealed by atomistic simulations. Modelling and Simulation in Materials Science and Engineering, 21, 16, (2013)
- U. Preiss, P. Eiden, J. Luczak et al. Modelling the influence of salts on the critical micelle concentration of ionic surfactants. Journal of Colloid and Interface Science, 412, 13-16, (2013)
- A. Katre, R. Drautz, G. Madsen. Modelling the lattice dynamics in SixGe1-x alloys. Journal of Physics: Condensed Matter, 25, 365403, (2013)
- C. Teijeiro Barjas, G. Sutmann, G. L. Taboada et al. Parallel simulation of Brownian dynamics on shared memory systems with OpenMP and Unified Parallel C. Journal of Supercomputing, 65, 1050-1062, (2013)
- T. Schablitzki, J. Rogal, R. Drautz. Topological fingerprints for intermetallic compounds for the automated classification of atomistic simulation data. Modelling and Simulation in Materials Science and Engineering, 21, 075008, (2013)
- T. Krüger, M. Gross, D. Raabe et al. Crossover from tumbling to tank-treading-like motion in dense simulated suspensions of red blood cells. Soft Matter, 9, 9008-9015, (2013)
- C.-W. Cho, J. Ranke, J. Arning et al. In silico modelling for predicting the cationic hydrophobicity and cytotoxicity of ionic liquids towards the Leukemia rat cell line, Vibrio fischeri and Scenedesmus vacuolatus based on molecular interaction potentials of ions. SAR and QSAR in Environmental Research, 24, 863-882, (2013)
- N. Vajragupta, J. Lian, M. Sharaf et al. The influence of grain size distribution on strain hardening behaviour for dual phase steels using statistically informed artificial microstructure model and crystal plasticity. Proceedings of the International Conference on Computational Plasticity, Fundamentals and Applications, COMPLAS XII, 1458-1470, (2013)
- S. Sampath, R. Janisch. Ab initio prediction of the critical thickness of a precipitate. Journal of Physics: Condensed Matter, 25, 355005, (2013)
- A. Koitzsch, T.K. Kim, U. Treske et al. Band-dependent emergence of heavy quasiparticles in CeCoIn5. Physical Review B, 88, 035124, (2013)
- M. Rahim, J. Frenzel, M. Frotscher et al. Bending rotation HCF testing of pseudoelastic Ni-Ti shape-memory alloys. Materialwissenschaft und Werkstofftechnik, 2013, 633-640, (2013)
- J. Jadczak, L. Bryja, J. Misiewicz et al. Charge conversion of nearly free and impurity bound magneto-trions immersed in 2D electron or hole gas with optically tunable concentration. Journal of Physics Conference Series, 456, 012017, (2013)
- A. Monas, R. Spatschek, C. Hüter et al. Phase field modeling of phase transitions stimulated by Joule heating. Journal of Crystal Growth, 375, 39-48, (2013)
- I. Steinbach. Phase-field model for microstructure evolution at the mesoscopic scale. Annual Review of Materials Research, 43, 89-107, (2013)
- S. Mandal, V. Chikkadi, B. Nienhuis et al. Single-particle fluctuations and directional correlations in driven hard-sphere glasses. Physical Review E, 88, 022129, (2013)
- M. Sharaf, P. Kucharczyk, A. Ma et al. Assessment of fatigue microcrack initiation and growth capabilities in structural steels: an interdisciplinary experimental and numerical method. Proceedings of the 3rd International Conference of Engineering Against Failure, (2013)
- M. Rahim, J. Frenzel, M. Frotscher et al. Impurity levels and fatigue lives of pseudoelastic NiTi shape memory alloys. Acta Materialia, 61, 3667-3686, (2013)
- J. Wang, J. Albina, T. Iwasaki et al. Influence of normal and shear strain on magnetic anisotropy energy of hcp cobalt: An ab initio study. Journal of Materials Research, 28, 1559-1566, (2013)
- J. Lian, N. Vajragupta, S. Münstermann. Micromechanical modeling of damage and failure in dual phase steels. Key Engineering Materials, 554-557, 2369-2374, (2013)
- A. Bialon. The iron-boron system : ordered structures and point defects. PhD Thesis, Ruhr-Universität Bochum, (2013)
- I. Steinbach. Why solidification? Why phase-field?. JOM - The Journal of The Minerals, Metals & Materials Society (TMS), 65, 1096-1102, (2013)
- S. Münstermann, N. Vajragupta, B. Weisgerber et al. A numerical study on the mechanical properties and the processing behaviour of composite high strength steels. Materials Testing, 55, 336-344, (2013)
- M. Čák, T. Hammerschmidt, R. Drautz. Comparison of analytic and numerical bond-order potentials for W and Mo. Journal of Physics: Condensed Matter, 25, 265002, (2013)
- L. Agudo, P. Nörtershäuser, J. Heyer et al. High-temperature and low-stress creep anisotropy of single-crystal superalloys. Acta Materialia, 61, 2926-2943, (2013)
- D. Medvedev, F. Varnik, I. Steinbach. Simulating mobile dendrites in a flow. Procedia Computer Science, 18, 2512-2520, (2013)
- M. Gross, I. Steinbach, D. Raabe et al. Viscous coalescence of droplets: a lattice Boltzmann study. Physics of Fluids, 25, 052101, (2013)
- U. Preiss, G. Steinfeld, H. Scherer et al. Fluorinated weakly coordinating anions [M(hfip)6]– (M = Nb, Ta): syntheses, structural characterizations and computations. ZAAC - Journal of Inorganic and General Chemistry, 19, 714-721, (2013)
- C. Teijeiro Barjas, G. Sutmann, G. L. Taboada et al. Parallel Brownian dynamics simulations with the message-passing and PGAS programming models. Computer Physics Communications, 184, 1191–1202, (2013)
- J. Lian, M. Sharaf, F. Archie et al. A hybrid approach for modelling of plasticity and failure behaviour of advanced high-strength steel sheets. International Journal of Damage Mechanics, 22, 188-218, (2013)
- A. Bialon, T. Hammerschmidt, R. Drautz. Ab initio study of boron in α-iron: migration barriers and interaction with point defects. Physical Review B, 87, 104109, (2013)
- B. Seiser, D. Pettifor, R. Drautz. Analytic bond-order potential expansion of recursion-based methods. Physical Review B, 87, 094105, (2013)
- L. Zhang, E. V. Danilova, I. Steinbach et al. Diffuse-interface modelling of solute trapping in rapid solidification: predictions of the hyperbolic phase-field model and parabolic model with finite interface dissipation. Acta Materialia, 61, 4155–4168, (2013)
- N. H. Siboni, D. Raabe, F. Varnik. Maintaining the equipartition theorem in small heterogeneous molecular dynamics ensembles. Physical Review E, 87, 030101, (2013)
- F. Varnik, A. Rios Nogues, M. Gross et al. Simulation of viscous sintering using the lattice Boltzmann method . Modelling and Simulation in Materials Science and Engineering, 21, 025003, (2013)
- N. Vajragupta, J. Lian, S. Münstermann et al. The strategy to consider microstructure features on the formability of AHSS: characterization of grain boundary properties. MEFORM 2013: Simulation von Umformprozessen, (2013)
- E. McEniry, R. Drautz, G. Madsen. Environmental tight-binding modelling of nickel and cobalt clusters. Journal of Physics: Condensed Matter , 25, 115502, (2013)
- M. Gross, F. Varnik. Interfacial roughening in non-ideal fluids: dynamic scaling in the weak- and strong-damping regime. Physical Review E, 87, 022407, (2013)
- V. Ganisetti. Multiscale modelling of the effect of oxygen on structure and cohesion of a symetric tilt grain boundary in molybdenum. Master Thesis, Ruhr-Universität Bochum, (2013)
- S. Bandaru. Oblique angle deposition of TiO2 thin films doped with Nb, W, Fe for solar water splitting. Master Thesis, Ruhr-Universität Bochum, (2013)
- . . Hybrid particle-continuum methods in computational material physics, 45, (2013)
- . . Hybrid particle-continuum methods in computational material physics, 46, (2013)
- M. Ford. Atomistic modelling of iron with magnetic analytic bond-order potentials. PhD Thesis, University of Oxford, (2013)
- F. Farahpour, A. Maleknejad, F. Varnik et al. Chain deformation in translocation phenomena. Soft Matter, 9, 2750-2759, (2013)
- J. Drain. Development of magnetic bond-order potentials for Mn and Fe-Mn. (2013)
- S. Mandal, M. Gross, D. Raabe et al. Flow heterogeneity and correlations in a sheared hard sphere glass: insight from computer simulations. 4th International Symposium on Slow Dynamics in Complex Systems: Keep Going Tohoku. AIP Conference Proceedings, 1518, 266-271, (2013)
- R. Darvishi Kamachali. Grain boundary motion in polycrystalline materials. Ph.D. Thesis, (2013)
- C. Schwarze. Grain boundary motion of carbon nanotube reinforced aluminium. Grain boundary motion of carbon nanotube reinforced aluminium, (2013)
- H. Hajiyani, U. Preiss, R. Drautz et al. High-throughput ab initio screening of binary solid solutions in olivine phosphates for Li-ion battery cathodes. Modelling and Simulation in Materials Science and Engineering, 21, 074004, (2013)
- M. Sharaf, J. Lian, N. Vajragupta et al. Influence of microstructural features on the propagation of microstructurally short fatigue cracks in structural steels. Fatigue of Materials II, 243-250, (2013)
- S. Ahmed. On multiscale aspects of fluid saturated porous media. Master Thesis, Ruhr-Universität Bochum, (2013)
- G. Díaz Leines. Path-metadynamics: A computational study of conformational transitions in proteins.. (2013)
- A. Köster. Plastic deformation and phase transformation: constitutive description of transformation induced plasticity steels. PhD Thesis, Ruhr-Universität Bochum, Bochum, (2013)
- S. Sampath. Prediction of the critical thickness of a metastable precipate MoCx in bcc Mo - an ab-initio study. PhD Thesis, Ruhr-Universität Bochum, Bochum, (2013)
- M. S. Schmokel, L. Bjerg, J. Overgaard et al. Pushing X-ray electron densities to the limit: thermoelectric CoSb3. Angewandte Chemie - International Edition, 52, 1503-1506, (2013)
- D. Pettifor, B. Seiser, R. Margine et al. Size versus electronic factors in transition metal carbide and TCP phase stability. Philosophical Magazine, 93, 3907-3924, (2013)
- J. Gehrmann. Transferable reduced TB models for elemental Si and N and binary Si-N systems. (2013)
- M. Rahim. Untersuchungen zum Einfluss von Kohlen- und Sauerstoff-Verunreinigungen auf das Ermüdungsverhalten von pseudoelastischen NiTi-Formgedächtnislegierungen. (2013)
- J. Pfetzing-Micklich, C. Somsen, A. Dlouhy et al. On the crystallographic anisotropy of nanoindentation in pseudoelastic NiTi. Acta Materialia, 61, 602-616, (2013)
2012
- T. Klaver, G. Madsen, R. Drautz. A DFT study of formation energies of Fe-Zn-Al intermetallics and solutes. Intermetallics, 31, 137-144, (2012)
- D. Psiachos, T. Hammerschmidt, R. Drautz. Ab-initio study of the interaction of H with substitutional solute atoms in alpha-Fe: trends across the transition-metal series. Computational Materials Science, 65, 235-238, (2012)
- M. Gross, F. Varnik. Critical dynamics of an isothermal compressible nonideal fluid. Physical Review E, 86, 061119, (2012)
- I. Opahle, G. Madsen, R. Drautz. High throughput density functional investigations of the stability, electronic structure and thermoelectric properties of binary silicides. Physical Chemistry Chemical Physics, 14, 16197–16202, (2012)
- V. Chikkadi, S. Mandal, B. Nienhuis et al. Shear-induced anisotropic decay of correlations in hard-sphere colloidal glasses . EPL Journal, 100, 56001, (2012)
- Y. Ouyang, X. Tong, C. Li et al. Thermodynamic and physical properties of FeAl and Fe3Al: an atomistic study by EAM simulation. Physica B, 407, 4530-4536, (2012)
- I. Lopez-Galilea, S. Huth, S. Fries et al. Microsegregation and secondary phase formation during directional solidification of the single-crystal Ni based superalloy LEK94. Metallurgical and Materials Transactions A, 43, 5153–5164, (2012)
- P. Engels, A. Ma, A. Hartmaier. Continuum simulation of the evolution of dislocation densities during nanoindentation. International Journal of Plasticity, 38, 159-169, (2012)
- Y. Du, J. Rogal, R. Drautz. Diffusion of hydrogen within idealized grains of bcc Fe: A kinetic Monte Carlo study. Physical Review B, 86, 174110, (2012)
- O. Shchyglo, U. Salman, A. Finel. Martensitic phase transformations in Ni–Ti-based shape memory alloys: The Landau theory. Acta Materialia, 60, 6784–6792, (2012)
- M. Gross, F. Varnik. Spreading dynamics of nanodrops: A lattice Boltzmann study. International Journal of Modern Physics C, 25, 7, (2012)
- R. Fechner, M. Stratmann, R. Gößling et al. The functional role of the ischiopubic membrane for the mechanical loading of the pubis in the domestic fowl (Gallus gallus). Journal of Anatomy, 222, 305 - 312, (2012)
- J. Zhang, T. Sun, Y.D. Yan et al. Atomistic investigation of scratching-induced deformation twinning in nanocrystalline Cu. Journal of Applied Physics, 112, 073526, (2012)
- N. Hatcher, G. Madsen, R. Drautz. DFT-based tight-binding modeling of iron-carbon. Physical Review B, 86, 155115, (2012)
- T. Hickel, M. Uijttewaal, A. Al-Zubi et al. Ab initio-based prediction of phase diagrams: application to magnetic shape memory alloys. Advanced Engineering Materials, 14, 547-561, (2012)
- C. Begau. Characterization of crystal defects during molecular dynamics simulations of mechanical deformation. Ph.D. Thesis, Ruhr-University Bochum, (2012)
- D. Mahajan, A. Hartmaier. Mechanisms of crazing in glassy polymers revealed by molecular dynamics simulations. Physical Review E, 86, 021802, (2012)
- B. Reinholz, S. Brinckmann. Phase transformations in the proximity of TiC precipitates in a NiTi matrix during fatigue. International Journal of Fatigue, 41, 72-82, (2012)
- C. Hüter, G. Boussinot, E. Brener et al. Solidification in syntectic and monotectic systems. Physical Review E, 86, 021603, (2012)
- X. Pang, N. Ahmed, R. Janisch et al. The mechanical shear behavior of Al single crystals and grain boundaries. Journal of Applied Physics, 112, 023503, (2012)
- J. Zhang, T. Sun, A. Hartmaier et al. Atomistic simulation of the influence of nanomachining-induced deformation on subsequent nanoindentation. Computational Materials Science, 59, 14-21, (2012)
- M. Schick, B. Hallstedt, A. Glensk et al. Combined ab initio, experimental, and CALPHAD approach for an improved thermodynamic evaluation of the Mg-Si system. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 37, 77-86, (2012)
- L. Bjerg, G. Madsen, B. Iversen. Ab initio calculations of intrinsic point defects in ZnSb. Chemistry of Materials, 24, 2111−2116, (2012)
- A. Köster, A. Ma, A. Hartmaier. Atomistically informed continuum model for body centered cubic iron. Actra Materialia, 60, 3894-3901, (2012)
- A. Köster, A. Ma, A. Hartmaier. Atomistically informed crystal plasticity model for body-centered cubic iron. Acta Materialia, 60, 3894–3901, (2012)
- M. Gross, F. Varnik. Simulation of static critical phenomena in nonideal fluids with the Lattice Boltzmann method. Physical Review E, 85, 056707, (2012)
- I. Steinbach, L. Zhang, M. Plapp. Phase-field model with finite interface dissipation. Acta Materialia, 60, 2689-2701, (2012)
- L. Zhang, I. Steinbach. Phase-field model with finite interface dissipation: extension to multi-component multi-phase alloys. Acta Materialia, 60, 2702-2710, (2012)
- U. Aydin, L. Ismer, T. Hickel et al. Solution enthalpy of hydrogen in fourth row elements: systematic trends derived from first principles. Physical Review B, 85, 155144, (2012)
- S. Sandlöbes, M. Friák, S. Zäfferer et al. The relation between ductility and stacking fault energies in Mg and Mg-Y alloys. Acta Materialia, 60, 3011-3021, (2012)
- R. Nazarov, T. Hickel, J. Neugebauer. Vacancy formation energies in fcc metals: influence of exchange-correlation functionals and correction schemes. Physical Review B, 85, 144118, (2012)
- R. Darvishi Kamachali, I. Steinbach. 3-D phase-field simulation of grain growth: topological analysis versus mean-field approximations. Acta Materialia, 60, 2719-2728, (2012)
- N. Vajragupta, V. Uthaisangsuk, B. Schmaling et al. A micromechanical damage simulation of dual phase steels using XFEM. Computational Materials Science , 54, 271-279, (2012)
- F. Körmann, A. Dick, B. Grabowski et al. Atomic forces at finite magnetic temperatures: phonons in paramagnetic iron. Physical Review B, 85, 125104, (2012)
- S. Mandal, M. Gross, D. Raabe et al. Heterogeneous shear in hard sphere glasses. Physical Review Letters, 108, 098301, (2012)
- A. Hartmaier. Large-scale molecular dynamics studies and scale-briding models for deformation and failure of materials. Hierarchical Methods for Dynamics in Complex Molecular Systems, 10, 107-114, (2012)
- A. Monas. Modeling of phase change materials for nonvolatile data storage using GPU simulations. Master Thesis, Ruhr-Universität Bochum, (2012)
- F. Otto, E. Payton, J. Frenzel et al. The effectiveness of coincidence site lattice criteria in predicting creep cavitation resistance. Journal of Materials Science, 47, 2915-2927, (2012)
- T. Hickel, B. Grabowski, F. Körmann et al. Advancing density functional theory to finite temperatures: methods and applications in steel design. Journal of Physics: Condensed matter, 24, 053202, (2012)
- Y. Du, L. Zhang, S.L. Cui et al. Atomic mobilities and diffusivities in Al alloys. Science China - Technological Science, 55, 306-328, (2012)
- L. Zhu, M. Friák, A. Dick et al. First-principles study of the thermodynamic and elastic properties of eutectic Fe-Ti alloys. Acta Materialia, 60, 1594-1602, (2012)
- P. Söderlind, B. Grabowski, L. Yang et al. High-temperature phonon stabilization of γ-uranium from relativistic first-principles theory. Physical Review B, 85, 060301, (2012)
- Y. Gao, N. Zhou, F. Yang et al. P-phase precipitation and its effect on martensitic transformation in (Ni,Pt)Ti shape memory alloys. Acta Materialia, 60, 1514-1527, (2012)
- L. Zhang, Y. Du, H.H. Xu et al. Thermodynamic description of the Mn-Si-Zn system. Science China - Technological Science, 55, 475-483, (2012)
- V. Arima, M. Iurlo, L. Zoli et al. Toward quantum-dot cellular automata units: thiolated-carbazole linked bisferrocenes. Nanoscale, 4, 813-823, (2012)
- D. Holec, M. Friák, J. Neugebauer et al. Trends in the elastic response of binary early transition metal nitrides. Physical Review B, 85, 064101, (2012)
- J. Zhang, Y. Wei, T. Sun, A. Hartmaier, et al.. Twin boundary spacing-dependent friction in nanotwinned copper. Physical Review B , 85, 054109, (2012)
- J. Zhang, W. Yujie, S. Tao et al. Twin boundary spacing-dependent friction in nanotwinned copper. Physical Review B, 85, 5, (2012)
- Y. S. Lin, M. Čák, V. Paidar et al. Why is the slip direction different in different B2 alloys?. Acta Materialia, 60, 881-888, (2012)
- C.W. Cho, C. Jungnickel, S. Stolte et al. Determination of LFER descriptors of 30 cations of ionic liquids—progress in understanding their molecular interaction potentials. ChemPhysChem, 13, 780–787, (2012)
- B. Schmaling. Determination of plastic material properties on different length scales by indentation techniques and inverse analyses. Ph.D. Thesis, Ruhr-University Bochum, (2012)
- D. Korbmacher. Dual scale modeling of hydrogen embrittlement. Master Thesis, Ruhr-University Bochum, (2012)
- A. Ma, A. Hartmaier. Scale bridging modeling of plastic deformation and damage initiation in polycrystals. Polycrystalline materials - theoretical and practical aspects, 3-26, (2012)
- T. Hammerschmidt, B. Seiser, M. Čák et al. Structural stability of topologically close-packed phases: understanding experimental trends in terms of the electronic structure. Superalloys 2012, 135-142, (2012)
- Y. Tang, Y. Du, L. Zhang et al. Thermodynamic description of the Al–Mg–Si system using a new formulation for the temperature dependence of the excess Gibbs energy. Thermochimica Acta, 527, 131-142, (2012)
- C. Begau, J. Hua, A. Hartmaier. A novel approach to study dislocation density tensors and lattice-rotation patterns in atomistic simulations. Journal of the Mechanics and Physics of Solids, 60, 711-722, (2012)
- S. Brinckmann, D. Mahajan, A. Hartmaier. A scheme to combine molecular dynamics and dislocation dynamics . Modelling and Simulation in Materials Science and Engineering, 20, 045001, (2012)
- B. Schmaling, A. Hartmaier. Determination of plastic material properties by analysis of residual imprint geometry of indentation. Journal of Materials Research, 27, 2167-2177, (2012)
- F. Otto, G. B. Viswanathan, E. Payton et al. On the effect of grain boundary segregation on creep and creep rupture. Acta Materialia, 60, 2982–2998, (2012)
- B. Seiser, T. Hammerschmidt, R. Drautz et al. TCP phase stability in Ni-based superalloys. Proceedings of NATO STO MP AVT 187 'Design, Modelling, Lifing and Validation of Advanced Materials in Extreme Military Environments.', (2012)
2011
- X. Pang, Z.Q. Liu, S.Q. Wang et al. Effects of Bi segregation on the tensile properties of Cu/Cu3Sn(100) interface. Microelectronics Reliability, 51, 2330-5, (2011)
- R. Hameed. Fitting of plasticity parameters based on indentatiotion results. Master thesis, (2011)
- C. Dai, H.H. Xu, S.Q. Wang et al. Interdiffusivities and atomic mobilities in fcc Cu–Al–Fe alloys. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 35, 556–561, (2011)
- B. Grabowski, P. Söderlind, T. Hickel et al. Temperature-driven phase transitions from first principles including all relevant excitations: the fcc-to-bcc transition in Ca. Physical Review B, 84, 214107, (2011)
- Y. Peng, Y. Du, L. Zhang et al. Thermodynamic modeling of the C–RE (RE = La, Ce and Pr) systems. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 35, 533–541, (2011)
- R. Drautz, D. Pettifor. Valence-dependent analytic bond-order potential for magnetic transition metals. Physical Review B, 84, 214114, (2011)
- M. Siewert, M. Gruner, A. Dannenberg et al. Designing shape-memory Heusler alloys from first-principles. Applied Physics Letters, 99, 191904, (2011)
- U. Preiss, W. Beichel, A. M. T. Erle et al. Is universal, simple melting point prediction possible?. ChemPhysChem, 12, 2959–2972, (2011)
- R. Margine, A. Kolmogorov, M. Reese et al. Development of orthogonal tight-binding models for Ti-C and Ti-N systems. Physical Review B, 84, 155120, (2011)
- Y. Du, L. Ismer, J. Rogal et al. First-principles study on the interaction of H interstitials with grain boundaries in α- and γ-Fe. Physical Review B, 84, 144121, (2011)
- M. Friák, T. Hickel, B. Grabowski et al. Methodological challenges in combining quantum-mechanical and continuum approaches for materials science applications. European Physical Journal Plus, 126, 101, (2011)
- S. Brinckmann, R. Sivanesapillai, A. Hartmaier. On the formation of vacancies by edge dislocation dipole annihilation in fatigued copper. International Journal of Fatigue, 33, 1369-1375, (2011)
- A. Dick, F. Körmann, T. Hickel et al. Ab initio based determination of thermodynamic properties of cementite including vibronic, magnetic and electronic excitations. Physical Review B, 84, 125101, (2011)
- Y. Liu, L. Zhang, Y. Du et al. Atomic mobilities, zero-flux planes and flux reversals in fcc Cu–Fe–Ni alloys. International Journal of Materials Research, 35, 376-383, (2011)
- Y. Du, T. J. Lenosky, R. G. Hennig et al. Energy landscape of silicon tetra-interstitials using an optimized classical potential. Physica Status Solidi B, 248, 2050–2055, (2011)
- A. Monas. Funktionsweise und Einflüsse auf die mobile Ultrasonic Contact Impedance (UCI)-Härteprüfung. Prakt. Met. Sonderband, 43, 91-96, (2011)
- J. Lian, N. Vajragupta, S. Münstermann et al. On application of a damage plasticity model to sheet metal forming of DP steel. Steel Research International Special Edition: 10th International Conference on Technology of Plasticity, Aachen, 901-906, (2011)
- N. A. W. Holzwarth, N. D. Lepley, Y. Du. Computer modeling of lithium phosphate and thiophosphate electrolyte materials. Journal of Power Sources, 196, 6870-6876, (2011)
- N. Moradi, F. Varnik, I. Steinbach. Contact angle dependence of the velocity of sliding cylindrical drop on flat substrates. Europhysics Letters, 95, 44003, (2011)
- L. Bjerg, G. Madsen, B. Iversen. Enhanced thermoelectric properties in zinc antimonides. Chemistry of Materials, 23, 3907-3914, (2011)
- J. von Pezold, L. Lymperakis, J. Neugebauer. Hydrogen-enhanced local plasticity at dilute bulk H concentrations: The role of H-H interactions and the formation of local hydrides. Acta Materialia, 59, 2969-2980, (2011)
- H. Zheng, D. Wu, S. Xue et al. Martensitic transformation in rapidly solidified Heusler Ni49Mn39Sn12 ribbons. Acta Materialia, 59, 5692-5699, (2011)
- L. Ferrighi, G. Madsen, B. Hammer. Self-consistent meta-generalized gradient approximation study of adsorption of aromatic molecules on noble metal surfaces. Journal of Chemical Physics, 135, 084704, (2011)
- I. Lopez-Galilea, S. Huth, S. Fries et al. Simulation of the external pressure influence on the micro-structural evolution of a single crystal Ni-based superalloy. Advanced Materials Research, 278, 247-252, (2011)
- E. McEniry, G. Madsen, J. Drain et al. Tight-binding simulation of transition-metal alloys. Journal of Physics: Condensed Matter, 23, 276004, (2011)
- D. Psiachos, T. Hammerschmidt, R. Drautz. Ab initio study of the modification of elastic properties of alpha-iron by hydrostatic strain and by hydrogen interstitials. Acta Materialia, 59, 4255-4263, (2011)
- S. Cui, W. Zhang, L. Zhang et al. Assessment of atomic mobilities in fcc Cu-Ni-Zn alloys. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 35, 231-241, (2011)
- B. Grabowski, T. Hickel, J. Neugebauer. Formation energies of point defects at finite temperatures. Physica Status Solidi B, 248, 1295–1308, (2011)
- T. Hammerschmidt, G. Madsen, J. Rogal et al. From electrons to materials. Physica Status Solidi B - Basic Solid State Physics, 248, 2213, (2011)
- D. Peter, F. Otto, T. Depka et al. High temperature test rig for inert atmosphere miniature specimen creep testing. Materialwissenschaft und Werkstofftechnik, 42, 493-499, (2011)
- M. Lodes, A. Hartmaier, M. Göken et al. Influence of dislocation density on the pop-in behavior and indentation size effect in CaF(2) single crystals: Experiments and molecular dynamics simulations. Acta Materialia, 59, 4264-4273, (2011)
- M. A. Lodes, A. Hartmaier, M. Göken et al. Influence of dislocation density on the pop-in behavior and indentation size effect in CaF2 single crystals: Experiments and molecular dynamics simulations. Acta Materialia, 59, 4264-4273, (2011)
- N. Ahmed, A. Hartmaier. Mechanisms of grain boundary softening and strain-rate sensitivity in deformation of ultrafine-grained metals at high temperatures. Acta Materialia, 59, 4323-4334, (2011)
- M. Gross, R. Adhikari, M. Cates et al. Modelling thermal fluctuations in non-ideal fluids with the lattice Boltzmann method. Philosophical Transactions of The Royal Society A, 13, 2274–2282, (2011)
- N. Moradi, M. Gross, F. Varnik et al. Morphologies of small droplets on patterned hydrophobic substrates. Modelling and Simulation in Materials Science and Engineering, 19, 45005, (2011)
- Y. Schneider, E. Soppa, C. Kohler et al. Numerical and experimental investigations of the global and local behaviour of an Al(6061)/Al2O3 metal matrix composite under low cycle fatigue. Procedia Engineering, 10, 1515–1520, (2011)
- T. Krüger, F. Varnik, D. Raabe. Particle stress in suspensions of soft objects. Philosophical Transactions of The Royal Society A, 13, 2414-2421, (2011)
- W. Gong, L. Zhang, H. Wei et al. Phase equilibria, diffusion growth and diffusivities in Ni-Al-Pt system using Pt/β-NiAl diffusion couples. Progress in Natural Science: Materials International, 21, 221-226, (2011)
- I. Steinbach, O. Shchyglo. Phase-field modelling of microstructure evolution in solids: Perspectives and challenges. Current Opinion in Solid State and Materials Science, 15, 87-92, (2011)
- N. Masquelier, H. Zapolsky, W. Lefebvre et al. Precipitation kinetics study of Al – Zr – X(Sc or Ti) alloys by phase-field simulations and atom-probe tomography. Solide State Phenomena, 172-174, 869-874, (2011)
- T. Gebhardt, D. Music, M. Ekholm et al. The influence of additions of Al and Si on the lattice stability of fcc and hcp Fe–Mn random alloys. Journal of Physics: Condensed Matter, 23, 246003, (2011)
- B. Seiser, T. Hammerschmidt, A. Kolmogorov et al. Theory of structural trends within 4d and 5d transition metal topologically close-packed phases. Physical Review B, 83, 224116, (2011)
- K. A. Fichthorn, Y. Tiwary, T. Hammerschmidt et al. Analytic many-body potential for GaAs(001) homoepitaxy: Bulk and surface properties. Physical Review B, 83, 195328, (2011)
- W. Song, U. Prahl, W. Bleck. Atomic analysis on bainitic reaction in high-carbon steel 100Cr6. 8th International Symposium on Atomic Level Characterization for New Materials and Devices’11 (ALC’11), 84-86, (2011)
- W. Song, U. Prahl, W. Bleck. Atomic scale observation on second phase precipitation in bainite reaction in high carbon steel 100Cr6. 26. Aachener Stahlkolloquium 2011, 29-35, (2011)
- A. Abbasi, A. Dick, T. Hickel et al. First-principles investigation of the effect of carbon on the stacking fault energy of Fe–C alloys. Acta Materialia, 59, 3041-3048, (2011)
- U. Preiss, S.P. Verevkin, T. Koslowski et al. Going full circle: Phase-transition thermodynamics of ionic liquids. Chemistry - A European Journal, 17, 6508-6517, (2011)
- P. Kucharczyk, M. Sharaf, S. Münstermann. Influence of microstructure on fatigue crack growth in structural steel. 26. Aachener Stahlkolloquium 2011, (2011)
- C.-W. Cho, U. Preiss, C. Jungnickel et al. Ionic Liquids: Predictions of physicochemical properties with experimental and/or DFT-calculated LFER parameters to understand molecular interactions in solution. The Journal of Physical Chemistry B, 115, 6040-6050, (2011)
- P. Uhlmann, F. Varnik, P. Truman et al. Microfluidic emulsion separation-simultaneous separation and sensing by multilayer nanofilm structures. Journal of Physics: Condensed Matter, 23, 184123, (2011)
- J. Lian, N. Vajragupta, S. Münstermann. Multiscale modeling of cold formability of DP steel using XFEM and the modified Mohr-Coulomb criterion. Proceeding, 26. Aachener Stahlkolloquium, Aachen, Germany, (2011)
- W. Guo, I. Steinbach, C. Somsen et al. On the effect of superimposed external stresses on the nucleation and growth of Ni4Ti3 particles: A parametric phase field study. Acta Materialia, 59, 3287-3296, (2011)
- G. Madsen, E. McEniry, R. Drautz. Optimized orthogonal tight-binding basis: Application to iron. Physical Review B, 83, 184119, (2011)
- A. Udyansky, J. von Pezold, A. Dick et al. Orientational ordering of interstitial atoms and martensite formation in dilute Fe-based solid solutions. Physical Review B, 83, 184112, (2011)
- F. Varnik, M. Gross, N. Moradi et al. Stability and dynamics of droplets on patterned substrates: insights from experiments and lattice Boltzmann simulations. Journal of Physics: Condensed Matter, 23, 184112, (2011)
- P. Müller-Buschbaum, D. Magerl, R. Hengstler et al. Structure and flow of droplets on solid surfaces. Journal of Physics: Condensed Matter, 23, 184111, (2011)
- M. Palumbo, T. Abe, S. Fries et al. First-principles approach to phase stability for a ternary σ phase: Application to Cr-Ni-Re. Physical Review B, 83, 144109, (2011)
- F. Otto, J. Frenzel, G. Eggeler. On the evolution of microstructure in oxygen-free high conductivity copper during thermo-mechanical processing using rotary swaging. International Journal of Materials Research, 102, 363-370, (2011)
- L. Zhang, I. Steinbach, Y. Du. Phase-field simulation of diffusion couples in the Ni-Al system. International Journal of Materials Research, 102, 371-380, (2011)
- W. Song, U. Prahl, W. Bleck et al. Phase-field simulations of baintic phase transformation in 100Cr6. TMS 2011 - 140th Annual Meeting and Exhibition, 417-425, (2011)
- F. Körmann, A. Dick, T. Hickel et al. Role of spin quantization in determining the thermodynamic properties of magnetic transition metals. Physical Review B, 83, 165114, (2011)
- M. Gross, M. Cates, F. Varnik et al. Langevin theory of fluctuations in the discrete Boltzmann equation. Journal of Statistical Mechanics: Theory and Experiment, 03, 1742-5468, (2011)
- J. Pfetzing-Micklich, S. Brinckmann, S.J. Dey et al. Micro-shear deformation of pure copper. Materialwissenschaft und Werkstofftechnik, 42, 219-223, (2011)
- F. Otto, J. Frenzel, G. Eggeler. On the influence of small quantities of Bi and Sb on the evolution of microstructure during swaging and heat treatments in copper. Journal of Alloys and Compounds, 509, 4073-4080, (2011)
- M. Prechtel, P. Leiva-Ronda, R. Janisch et al. Simulation of fracture in heterogeneous elastic materials with cohesive zone models. International Journal of Fracture, 168, 15-29, (2011)
- O. Dezellus, R. Arroyave, S. Fries. Thermodynamic modelling of the Ag-Cu-Ti ternary system. International Journal of Materials Research, 03, 286-294, (2011)
- W. Guo, R. Spatschek, I. Steinbach. An analytical study of the static state of multi-junctions in a multi-phase field model. Physica D, 240, 382-388, (2011)
- C. Begau, A. Hartmaier, E.P. George et al. Atomistic processes of dislocation generation and plastic deformation during nanoindentation. Acta Materialia, 59, 934-942, (2011)
- B. Eidel. Crystal plasticity finite-element analysis versus experimental results of pyramidal indentation into (001) fcc single crystal. Acta Materialia, 59, 1761-1771, (2011)
- M. Friák, T. Hickel, F. Körmann et al. Determining the elasticity of materials employing quantum-mechanical approaches: from the electronic ground state to the limits of materials stability. Steel Research International, 82, 86-100, (2011)
- A. Bialon, T. Hammerschmidt, R. Drautz et al. Possible routes for synthesis of new boron-rich Fe-B and Fe1-xCrxB4 compounds. Applied Physics Letters, 98, 081901-(1-3), (2011)
- J. Zhao, Y. Du, L. Zhang et al. Thermodynamic assessment of the Sn-Sr system supported by first-principles calculations. Thermochimica Acta, 529, 74-79, (2011)
- T. Böhme, T. Hammerschmidt, R. Drautz et al. Closing the gap between nano- and macroscale: Atomic interactions vs. macroscopic materials behavior. Thermodynamics - Kinetics of Dynamic Systems, 129-164, (2011)
- P. Wang, J. Zhao, Y. Du et al. Experimental investigation and thermodynamic calcualtion of the Fe-Mg-Mn and Fe-Mg-Ni systems. International Journal of Materials Research, 102, 6-16, (2011)
- S. Ayodele, F. Varnik, D. Raabe. Lattice Boltzmann study of pattern formation in reaction-diffusion systems. Physical Review E, 83, 14, (2011)
- M. Pouya. Lattice-Boltzmann simulation of Gray-Scott model with inhomogeneous reaction rates: Towards applications in vegetation pattern formation. Master Thesis, Ruhr-University Bochum, (2011)
- R. Schultz. Mesoscale-modelling of pine tree nanowires. Master Thesis, Ruhr-University Bochum, 1-92, (2011)
- M. Gross, N. Moradi, G. Zikos et al. Shear stress in nonideal fluid lattice Boltzmann simulations. Physical Review E, 83, 17701, (2011)
- E. Hristova, R. Janisch, R. Drautz et al. Solubility of carbon in α-iron under volumetric strain and close to the Σ5(310)[001] grain boundary: Comparison of DFT and empirical potential methods. Computational Materials Science, 50, 1088-1096, (2011)
- X. Pang, Z.Q. Liu, S.Q. Wang et al. First-principles calculations of doped elements on electromigration of Bi. The Chinese Journal of Nonferrous Metals, 21, 875, (2011)
- I. Steinbach, M. Plapp. Pearlite revisited. Continuum Mechanics and Thermodynamics, 1, 0935-1175, (2011)
- B. Seiser, R. Drautz, D. Pettifor. TCP phase predictions in Ni-based superalloys: Structure maps revisited. Acta Materialia, 59, 749-763, (2011)
2010
- N. Ahmed, A. Hartmaier. A two-dimensional dislocation dynamics model of the plastic deformation of polycrystalline metals. Journal of the Mechanics and Physics of Solids, 58, 2054-2064, (2010)
- M. Palumbo, T. Abe, C. Kocer et al. Ab initio and thermodynamic study of the Cr-Re system. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 34, 495-503, (2010)
- P. Elsternová, M. Friák, H. Fabritius et al. Ab initio study of thermodynamic, structural, and elastic properties of Mg-substituted crystalline calcite. Acta Biomaterialia, 6, 4506-4512, (2010)
- H. Ji, J. Frenzel, Z. Qi et al. An ultrafine nanoporous bimetallic Ag–Pd alloy with superior catalytic activity. CrystEngComm, 12, 4059-4062, (2010)
- R. Nazarov, T. Hickel, J. Neugebauer. First-principles study of the thermodynamics of hydrogen-vacancy interaction in fcc iron. Physical Review B, 82, 224104, (2010)
- D. Peter, G. Viswanathan, A. Dlouhy et al. Analysis of local microstructure after shear creep deformation of a fine grained duplex γ-TiAl alloy. Acta Materialia, 58, 6431-6443, (2010)
- S. Johnsen, M. Christensen, B. Thomsen et al. Barium dynamics in noble-metal clathrates. Phys. Rev. B, 82, 184303, (2010)
- R. Darvishi Kamachali, J. Hua, I. Steinbach et al. Multiscale simulations on the grain growth process in nanostructured materials. International Journal of Materials Research, 11, 1332-1338, (2010)
- A. N. Kolmogorov, S. Shah, E. R. Margine et al. New superconducting and semiconducting Fe-B compounds predicted with an ab initio evolutionary search. Physical Review Letters, 105, 217003, (2010)
- W. Lechner, J. Rogal, J. Juraszek et al. Nonlinear reaction coordinate analysis in the reweighted path ensemble. Journal of Chemical Physics, 133, 174110, (2010)
- J. Rogal, W. Lechner, J. Juraszek et al. The reweighted path ensemble. Journal of Chemical Physics, 133, 174109, (2010)
- M. Gross, R. Adhikari, M. Cates et al. Thermal fluctuations in the lattice Boltzmann method for nonideal fluids. Physical Review E, 82, 056714, (2010)
- J. Crivello, M. Palumbo, T. Abe et al. Ab initio ternary σ -phase diagram: The Cr–Mo–Re system. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 34, 487-494, (2010)
- D. Mahajan, R. Estevez, S. Basu. Ageing and rejuvenation in glassy amorphous polymers. Journal of the Mechanics and Physics of Solids, 58, 1474-1488, (2010)
- Z. Zhang, Y. Wang, J. Frenzel. Ancient technology/novel nanomaterials: casting titanium carbide nanowires. CrystEngComm, 12, 2835-2840, (2010)
- J. Stausholm-Møller, H. H. Kristoffersen, B. Hinnemann et al. DFT+U study of defects in bulk rutile TiO2. Journal of Chemical Physics, 133, 144708, (2010)
- E. McEniry, Y. Wang, D. Dundas et al. Modelling non-adiabatic processes using correlated electron-ion dynamics. The European Physical Journal B, 77, 305-329, (2010)
- F. Della Sala, E. Fabiano, S. Laricchia et al. The role of exact-exchange in the theoretical description of organic-metal interfaces. International Journal of Quantum Chemistry, 110, 2162 - 2172, (2010)
- M. Baricco, M. Palumbo, E. Pinatel et al. Thermodynamic database for hydrogen storage materials. Advances in Science and Technology, 72, 213-218, (2010)
- Y. Liu, J. Wang, Y. Du et al. Mobilities and diffusivities in fcc Fe-X (X = Ag, Au, Cu, Pd and Pt) alloys. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 34, 253-262, (2010)
- D. Mahajan, S. Basu. On the simulation of uniaxial, compressive behavior of amorphous, glassy polymers. International Journal of Applied Mechanics, 2, 515-541, (2010)
- L. Zhang. Phase diagram, thermodynamics, diffusion and simulation of microstructure evolution of alloys in the Al-Cu-Fe-Mn-Ni system. Ph.D. Thesis, Central South University, Changsha, P.R. China, (2010)
- T. Krüger, F. Varnik, D. Raabe. Second-order convergence of the deviatoric stress tensor in the standard Bhatnagar-Gross-Krook lattice Boltzmann method. Physical Review E, 82, 025701, (2010)
- W. Counts, M. Friák, D. Raabe et al. Ab initio guided design of bcc ternary Mg-Li-X (X=Ca, Al, Si, Zn, Cu) alloys for ultra-lightweight applications. Advanced Engineering Materials, 12, 572-576, (2010)
- M. Friák, J. Neugebauer. Ab initio study of the anomalous volume-composition dependence in Fe-Al alloys. Intermetallics, 18, 1316-1321, (2010)
- M. Friák, J. Deges, R. Krein et al. Combined ab initio and experimental study of structural and elastic properties of Fe3Al-based ternaries. Intermetallics, 18, 1310-1315, (2010)
- J. Rogal, P. G. Bolhuis. On the efficiency of biased sampling of the multiple state path ensemble. Journal of Chemical Physics, 133, 034101, (2010)
- D. Mahajan, B. Singh, S. Basu. Void nucleation and disentanglement in glassy amorphous polymers. Physical Review E, 82, 011803, (2010)
- V. Paidar, Y.-S. Lin, M. Čák et al. Why is the slip direction in CuZn and FeAl different than in CoTi?. Intermetallics, 18, 1285-1287, (2010)
- R. Spatschek, A. Karma. Amplitude equations for polycrystalline materials with interaction between composition and Stress. Physical Review B, 81, 214201, (2010)
- S. Brookes, H.-J. Kühn, B. Skrotzki et al. Axial–torsional thermomechanical fatigue of a near-γ TiAl-alloy. Materials Science and Engineering: A, 527, 3829-3839, (2010)
- J. Hua, A. Hartmaier. Determining Burgers vectors and geometrically necessary dislocation densities from atomistic data. Modelling and Simulation in Materials Science and Engineering, 18, 045007, (2010)
- L. Zhang, Y. Du, I. Steinbach et al. Diffusivities of an Al-Fe-Ni melt and their effects on the microstructure during solidification. Acta Materialia, 58, 3664-3675, (2010)
- M. F.-X. Wagner, S. R. Dey, H. Gugel et al. Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling. Intermetallics, 18, 1172-1179, (2010)
- J. Enkovaara, C. Rostgaard, J. Mortensen et al. Electronic structure calculations with GPAW: a real-space implementation of the projector augmented-wave method. Journal of Physics: Condensed Matter, 22, 253202, (2010)
- R. Zarnetta, R. Takahashi, M. L. Young et al. Identification of quaternary shape memory alloys with near-zero thermal hysteresis and unprecedented functional stability. Advanced Functional Materials, 20, 1917-1923, (2010)
- D. Peter, M. Wagner, G. Eggeler. Microstructural characterization of lamellar features in TiAl by FIB imaging. Advanced Engineering Materials, 12, 447-452, (2010)
- R. Spatschek, E. A. Brener, A. Karma. Phase field modeling of crack propagation. Philosophical Magazine, 91, 75-95, (2010)
- G. Cacciamani, A. Dinsdale, M. Palumbo et al. The Fe-Ni system: thermodynamic modelling assisted by atomistic calculations. Intermetallics, 18, 1148-1162, (2010)
- R. Janisch, N. Ahmed, A. Hartmaier. Ab initio tensile tests of Al bulk crystals and grain boundaries: universality of mechanical behaviour. Physical Review B, 81, 184108, (2010)
- L. Ferrighi, G. Madsen, B. Hammer. Alkane dimers interaction: a semi-local MGGA functional study. Chemical Physics Letters, 492, 183-186, (2010)
- Y. Du, N. A. W. Holzwarth. First-principles study of LiPON and related solid electrolytes. Physical Review B, 81, 184106, (2010)
- J. Frenzel, E. George, A. Dlouhy et al. Influence of Ni on martensitic phase transformations in NiTi shape memory alloys. Acta Materialia, 58, 3444-3458, (2010)
- D. Medvedev. Lattice Boltzmann model for simulation of the electric breakdown in liquids. Procedia Computer Science, 1, 811-818, (2010)
- N. Wang, R. Spatschek, A. Karma. Multi-phase-field analysis of short-range forces between diffuse interfaces. Physical Review E, 81, 051601, (2010)
- G. Cirmi, D. Brida, A. Gambetta et al. Observation and control of coherent torsional dynamics in a quinquethiophene molecule. Physical Chemistry Chemical Physics, 12, 7917-7923, (2010)
- Y. Schneider, A. Bertram, T. Böhlke et al. Plastic deformation behaviour of Fe–Cu composites predicted by 3D finite element simulations. Computational Materials Science, 48, 456–465, (2010)
- M. Gross, F. Varnik, D. Raabe et al. Small droplets on superhydrophobic substrates. Physical Review E, 81, 051606, (2010)
- A. Wang, S.L. Shang, Y. Du et al. Structural and elastic properties of cubic and hexagonal TiN and AlN from first-principles calculations . Computational Materials Science, 48, 705-709, (2010)
- M. Stiemer, A. Groß-Wöhrmann, S. Gladkov et al. Efficient and reliable finite element techniques for phase field models. International Journal of Materials Research, 101, 498-502, (2010)
- M. Fleck, E. A. Brener, R. Spatschek et al. Elastic and plastic effects on solid-state transformations: a phase-field study. International Journal of Materials Research, 101, 462-466, (2010)
- W. Guo, I. Steinbach. Multi-phase field study of the equilibrium state of multi-junctions. International Journal of Materials Research, 101, 480-485, (2010)
- M. L. Young, M. F.-X. Wagner, J. Frenzel et al. Phase volume fractions and strain measurements in an ultrafine-grained NiTi shape-memory alloy during tensile loading. Acta Materialia, 58, 2344-2354, (2010)
- K. Kassner, R. Spatschek, C. Gugenberger. Phase-field modeling of surface diffusion. International Journal of Materials Research, 101, 456-461, (2010)
- F. Körmann, A. Dick, T. Hickel et al. Rescaled Monte Carlo approach for magnetic systems: ab initio thermodynamics of bcc iron. Physical Review B, 81, 134425, (2010)
- H.R. Chauke, B. Minisini, R. Drautz et al. Theoretical investigation of the Pt3Al ground state. Intermetallics, 18, 417-421, (2010)
- L. Ismer, T. Hickel, J. Neugebauer. Ab initio study of the solubility and kinetics of hydrogen in austenitic high Mn steels. Physical Review B, 81, 094111, (2010)
- J. von Pezold, A. Dick, M. Friák et al. Generation and performance of special quasirandom structures for studying the elastic properties of random alloys: Application to Al-Ti. Physical Review B, 81, 094203, (2010)
- J. Pesicka, A. Aghajani, C. Somsen et al. How dislocation substructures evolve during long-term creep of a 12% Cr tempered martensitic ferritic steel. Scripta Materialia, 62, 353-356, (2010)
- G. Ziegenhain, H. Urbassek, A. Hartmaier. Influence of crystal anisotropy on elastic deformation and onset of plasticity in nanoindentation: A simulational study. Journal of Applied Physics, 107, 061807, (2010)
- D. Senk, S. Stratemeier, B. Böttger et al. Modeling of hot ductility during solidification of steel grades in continuous casting - part I. Advanced Engineering Materials, 12, 94-100, (2010)
- B. Böttger, S. Stratmeier, E. Subasic et al. Modeling of hot ductility during solidification of steel grades in continuous casting - part II. Advanced Engineering Materials, 12, 101-109, (2010)
- B. Hallstedt, D. Djurovic, J. von Appen et al. Thermodynamic properties of cementite (Fe3C). CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 34, 129-133, (2010)
- J. Pfetzing-Micklich, M. F.-X. Wagner, R. Zarnetta et al. Nanoindentation of a pseudoelastic NiTiFe shape memory alloy. Advanced Engineering Materials, 12, 13-19, (2010)
- T. N. Todorov, D. Dundas, E. McEniry. Nonconservative generalized current-induced forces. Physical Review B, 81, 075416, (2010)
- N. Moradi, F. Varnik, I. Steinbach. Roughness-gradient-induced spontaneous motion of droplets on hydrophobic surfaces: A lattice Boltzmann study. Europhysics Letters, 89, 26006, (2010)
- Y. Liu, D. Liang, J. Zhang. Thermodynamic Descriptions for the Sn-Te and Pb-Sn-Te Systems . Journal of Electronic Materials, 29, 246-257, (2010)
- L. Zhang, Y. Du, Q. Chen et al. Atomic mobilities and diffusivities in the fcc, L12 and B2 phases of the Ni-Al system. International Journal of Materials Research, 101, 1862-5282, (2010)
- M. Fleck, C. Hüter, D. Pilipenko et al. Pattern formation during diffusion limited transformations in solids. Philosophical Magazine, 90, 265-286, (2010)
- I. Steinbach, X. Song, A. Hartmaier. Phase-field model with plastic flow for grain-growth in nanocrystalline material. Philosophical Magazine, 90, 485-499, (2010)
- B. Eidel, A. Hartmaier, P. Gumbsch. Application of atomistic simulations for the investigation of fracture processes. Multiscale modelling of plasticity and fracture by means of dislocation mechanics, CISM International Centre for Mechanical Sciences, Courses and Lectures, 522, 1-58, (2010)
- J. Hua, A. Hartmaier. Development of a method to determine Burgers vectors from atomistic data. Journal of Physics: Conference Series, 240, 012010, (2010)
- J. Enkovaara, C. Rostgaard, J. Mortensen et al. Electronic structure calculations with GPAW: A real-space implementation of the projector-augmented wave method. Psi-k Newsletter, 98, 29-76, (2010)
- D. Peter. Mechanische und mikrostrukturelle Untersuchungen zum ein- und zweiachsigen Kriechverhalten hoch-niobhaltiger γ-TiAl-Legierungen.. Ph.D. Thesis, Ruhr-Universität Bochum, (2010)
- W. Song, N. Francke, U. Prahl et al. Modeling of bainitic phase transformation in high carbon steel. International Conference of Advanced Steels, 2010, 115-124, (2010)
- X. Zeng, A. Hartmaier. Modeling size effects on fracture toughness by dislocation dynamics. Acta Materialia, 58, 301-310, (2010)
- N. Ahmed. Multiscale modeling of deformation of polycrystalline metals. Ph.D. Thesis, Ruhr-Universität Bochum, (2010)
- A. Shaban, A. Ma, A. Hartmaier. Polycrystalline material deformation modeling with grain boundary sliding and damage accumulation. Proceedings of 18th European Conference on Fracture (ECF18), 250-257, (2010)
- V. Paidar, M. Čák, M. Šob et al. Theoretical analysis of dislocation splittings in MoSi2. Journal of Physics: Conference Series, 240, 012007, (2010)
- B. Schmaling, A. Ma, A. Hartmaier. Transformation induced plasticity modelling based on micromechanical approaches. MMM 2010 Conference Proceedings, 532-535, (2010)
- G. Madsen, L. Ferrighi, B. Hammer. Treatment of layered structures using a semilocal meta-GGA density functional. Journal of Physical Chemistry Letters, 1, 515-519, (2010)
2009
- P. K. Galenko, S. Reutzel, D. M. Herlach et al. Dendritic solidification in undercooled Ni-Zr-Al melts: experiments and modeling. Acta Materialia, 57, 6166-6175, (2009)
- A. Saeed-Akbari, J. Imlau, U. Prahl et al. Derivation and variation in composition-dependent stacking fault energy maps based on subregular solution model in high-manganese steels. Metallurgical and Materials Transactions A, 40A, 3076-3090, (2009)
- Y. Liu, L. Zhang, Y. Du et al. Ferromagnetic ordering and mobility end-members for impurity diffusion in bcc Fe. CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry, 33, 732-736, (2009)
- A. Aghajani, F. Richter, C. Somsen et al. On the formation and growth of Mo-rich Laves phase particles during long-term creep of a 12% chromium tempered martensite ferritic steel. Scripta Materialia, 61, 1068-1071, (2009)
- S. Ayodele, F. Varnik, D. Raabe. Transverse diffusive mixing of solutes in pressure driven microchannels: a Lattice Boltzmann study of the scaling laws. La Houille Blanche, International Water Journal, 6, 93 - 100, (2009)
- T. Hammerschmidt, R. Drautz, D. G. Pettifor. Atomistic modelling of materials with bond-order potentials. International Journal of Materials Research, 100, 1479-1487, (2009)
- B. Eidel. Coupling atomistic accuracy with continuum effectivity for predictive simulations in materials research - the Quasicontinuum method. International Journal of Materials Research, 100, 1503-1512, (2009)
- C. Grossmann, J. Frenzel, V. Sampath et al. Elementary transformation and deformation processes and the cyclic stability of NiTi and NiTiCu shape memory spring actuators. Metallurgical and Materials Transactions A, 40, 2530-2544, (2009)
- M. Gross, F. Varnik, D. Raabe. Fall and rise of small droplets on rough hydrophobic substrates. Europhysics Letters, 88, 26002, 1-6, (2009)
- R. Janisch, C. Elsässer. Interstitial impurities at grain boundaries in metals: insight from atomistic calculations. International Journal of Materials Research, 100, 1488-1493, (2009)
- F. Varnik, K. Binder. Multiscale modelling of polymers at interfaces. International Journal of Materials Research, 100, 1494-1502, (2009)
- N. Warnken, D. Ma, A. Drevermann et al. Phase-field modelling of as-cast microstructure evolution in nickel-based superalloys. Acta Materialia, 57, 5862-5875, (2009)
- E. Torres, A. T. Blumenau, P. U. Biedermann. The role of gold adatoms in self-assembled monolayers of thiol on Au(111). International Journal of Quantum Chemistry, 109, 3466 - 3472, (2009)
- Y. Liu, D. Liang, L. Zhang. Thermodynamic Descriptions for the Sn-Te and Pb-Sn-Te Systems. Journal of Electronic Materials, 39, 246-257, (2009)
- L. Lymperakis, M. Friák, J. Neugebauer. Atomistic calculations on interfaces: bridging the length and time scales. The European Physics Journal - Special Topics, 177, 41-57, (2009)
- R. Spatschek, C. Gugenberger, E. A. Brener. Effective elastic moduli in solids with high density of cracks. Physical Review B, 80, 144106, 1-8, (2009)
- A. Brener, G. Boussinot, C. Hüter et al. Pattern formation during diffusional transformations in the presence of triple junctions and elastic effects. Journal of Physics - Condensed Matter, 21, 464106, 1-10, (2009)
- I. Steinbach. Pattern formation in constrained dendritic growth with solutal buoyancy. Acta Materialia, 57, 2640-2645, (2009)
- I. Steinbach. Phase-field models in materials science; a tutorial review. Modelling and Simulation in Materials Science and Engineering, 17, 073001-31, (2009)
- P. Suwanpinij, J. Rudnizki, U. Prahl et al. Investigation of the effect of deformation on gamma to alpha phase transformation kinetics in hot-rolled dual phase steel by phase field approach. Steel Research International, 80, 606-622, (2009)
- G. Ziegenhain, A. Hartmaier, H. M. Urbassek. Pair vs many-body potentials: influence on elastic and plastic behavior in nanoindentation of fcc metals. Journal of the Mechanics and Physics of Solids , 57, 1514–1526 , (2009)
- H. Meier, C. Haberland, J. Frenzel et al. Selective Laser Melting of NiTi shape memory components. Innovative Developments in Design and Manufacturing: Advanced Research in Virtual and Rapid Prototyping, 233-238, (2009)
- A. Dick, T. Hickel, J. Neugebauer. The effect of disorder on the concentration-dependence of stacking fault energies in Fe1-xMnx - A first principles study. Steel Research International, 80, 603 - 608, (2009)
- L. Ferrighi, B. Hammer, G. Madsen. 2D-3D transition for cationic and anionic gold clusters: A kinetic energy density functional study. Journal of the American Chemical Society, 131, 10605-10609, (2009)
- S. Fries, B. Boettger, J. Eiken et al. Upgrading CALPHAD to microstructure simulation: the phase-field method. International Journal of Materials Research, 100, 128-134, (2009)
- P. Kratzer, T. Hammerschmidt. Atomic processes in molecular beam epitaxy on strained InAs(137): a density-functional theory study. Physical Review B, 80, 035324, (2009)
- S. G. Ayodele, F. Varnik, D. Raabe. Effect of aspect ratio on transverse diffusive broadening: A lattice Boltzmann study. Physical Review E, 80, 016304, 1-9, (2009)
- V. Uthaisangsuk, U. Prahl, W. Bleck. Failure modeling of multiphase steels using representative volume elements based on real microstructures. Procedia Engineering, 1, 171-176, (2009)
- R. Garg, A. Hüe, V. Haxha et al. Tunability of the piezoelectric fields in strained III-V semiconductors. Applied Physics Letters, 95, 041912,1-3, (2009)
- B. Sundman, I. Ohnuma, N. Dupin et al. An assessment of the entire Al-Fe system including DO3 ordering. Acta Materialia, 57, 2896-2908, (2009)
- D. Peter, G. Viswanathan, M. Wagner et al. Grain-boundary sliding in a TiAl alloy with fine-grained duplex microstructure during 750 degrees C creep. Materials Science and Engineering A -Structural Materials Properties Microstructure and Processing, 510-11, 359-363, (2009)
- A. Udyansky, J. von Pezold, V. N. Bugaev et al. Interplay between long-range elastic and short-range chemical interactions on Fe-C martensite formation. Physical Review B, 79, 224112, 1-5, (2009)
- D. Peter, J. Pfetzing, M.F.-X. Wagner et al. Microstructural anisotropy, uniaxial and biaxial creep behavior of Ti-45Al-5Nb-0.2B-0.2C. Materials Science and Engineering: A, 510-11, 368-372, (2009)
- P. Armstrong, C. Knieke, M. Mackovic et al. Microstructural evolution during deformation of tin dioxide nanoparticles in a comminution process. Acta Materialia, 57, 3060–3071, (2009)
- V. Uthaisangsuk, U. Prahl, W. Bleck. Characterisation of formability behaviour of multiphase steels by micromechanical modelling. International Journal of Fracture, 157, 55-69, (2009)
- Y. Chen, T. Hammerschmidt, D. G. Pettifor et al. Influence of vibrational entropy on structural stability of Nb-Si and Mo-Si systems at elevated temperatures. Acta Materialia, 57, 2657-2664 , (2009)
- F. Körmann, A. Dick, T. Hickel et al. Pressure dependence of the Curie temperature in bcc iron studied by ab initio simulations. Physical Review B, 79, 184406-184411, (2009)
- V. Uthaisangsuk, U. Prahl, W. Bleck. Stretch-flangeability characterisation of multiphase steel using a microstructure based failure modelling. Computational Materials Science, 45, 617-623, (2009)
- G. J. Schmitz, U. Prahl. Toward a virtual platform for materials processing. JOM - Journal of the Minerals, Metals and Materials Society, 61, 19-23, (2009)
- M. Apel, S. Benke, I. Steinbach. Virtual dilatometer curves and effective Young’s modulus of a 3D multiphase structure calculated by the phase-field method. Computational Materials Science, 45, 589-592 , (2009)
- A. Böhner, R. Janisch, A. Hartmaier. Ab initio investigation of diamond coatings on steel . Scripta Materialia, 60, 504-507, (2009)
- B. Grabowski, L. Ismer, T. Hickel et al. Ab initio up to the melting point: anharmonicity and vacancies in aluminium. Physical Review B, 79, 134106, 1-16, (2009)
- J. Imlau, W. Bleck, S. Zaefferer. Comparison of damage development depending on the local microstructure in low alloyed Al-TRIP-Steels, IF steel and a DP steel. International Journal of Materials Research, 100, 584-593, (2009)
- H. Zheng, J. Pfetzing-Micklich, J. Frenzel et al. Nanoindentation of Ti50Ni48Fe2 and Ti50Ni40Cu10 shape memory alloys. International Journal of Materials Research, 100, 594-602, (2009)
- T. Krüger, F. Varnik, D. Raabe. Shear stress in lattice Boltzmann simulations. Physical Review E, 79, 046704, 1-14, (2009)
- S. S. Khan, N. Hort, J. Eiken et al. Numerical determination of heat distribution and castability simulations of as cast Mg-Al alloys. Advanced Engineering Materials, 11, 162-168, (2009)
- R. Garg, V. Haxha, M. A. Migliorato et al. Strain dependence of piezoelectric coefficients for pseudomorphically grown semiconductors. Microelectronics Journal, 40, 601-603, (2009)
- C. Colinet, J. C. Tedenac, S. Fries. Structural stability of intermetallic phases in the Sn Ti system. Calphad - Experimental and Computational investigation of intermetallic systems: A Special Issue Dedicated to Prof. Riccardo Ferro, 33, 250-259, (2009)
- M. Apel, B. Böttger, J. Rudnizki et al. Grain growth simulations including particle pinning using the multiphase-field concept. ISIJ International, 49, 1024-1029, (2009)
- E. Torres, A. T. Blumenau, P. U. Biedermann. Mechanism for phase transitions and vacancy island formation in alkylthiol/Au(111)self-assembled monolayers based on adatom and vacancy-induced reconstructions. Physical Review B, 79, 075440, 1-6, (2009)
- S.P. Brookes, H.J. Kühn, B. Skotzki et al. Multi-axial thermo-mechanical fatigue of a near-gamma TiAl-alloy. Advanced Materials Research, 59, 283-287, (2009)
- T. Hickel, A. Dick, B. Grabowski et al. Steel design from fully parameter-free ab initio computer simulations. Steel Research International, 80, 4-8, (2009)
- J. Pfetzing-Micklich, M. F.-X. Wagner, J. Frenzel et al. Thermomechanical constraints on pseudoelasticity during nanoindentation of binary and ternary NiTi(Fe) alloys. TMS, 639-644, (2009)
- M. A. Uijttewaal, T. Hickel, J. Neugebauer et al. Understanding the phase transitions of the Ni2MnGa magnetic shape memory system from first principles. Physical Review Letters, 102, 035702, 1-4, (2009)
- B. Eidel, A. Stukowski. A variational formulation of the quasicontinuum method based on energy sampling in clusters. Journal of the Mechanics and Physics of Solids, 57, 87-108, (2009)
- T. Hammerschmidt, R. Drautz. Bond-order potentials for bridging the electronic to atomistic modelling hierarchies. Multiscale Simulation Methods in Molecular Science, 229-246, (2009)
- X. Guo, W. Bleck, J. Post et al. Delayed cracking in meta-stable austenitic stainless steels and its prediction by FEM simulation. Stainless Steel World Conference & Exhibition, Maastricht, (2009)
- W. Bleck, K. Imlau, K. Phiu-On. Gefüge und mechanische Eigenschaften von kalt umformbaren Stählen mit TWIP/TRIP-Effekt. 9. Tagung Gefüge und Bruch, Leoben, 125-138, (2009)
- J. Rudnizki, B. Zeislmair, U. Prahl et al. Gefügesimulation beim Hochtemperatur-Einsatzhärten. HTM - Journal of Heat Treatment and Materials, 64, 176-185, (2009)
- D. Gosslar, R. Günther, C. Hartig et al. Grain refinement of γ-TiAl alloys by inoculation. Material Research Society Symposium Proceedings, 1128, 1128-U03-02, (2009)
- M. Urban, C. Keul, W. Bleck et al. High-strength ductile bainitic steel for high-stressed forged structural parts. Proceedings of the 5th JSTP International Seminar on Precision Forging, Kyoto, 163-166, (2009)
- W. Bleck. High-strength steels for car bodies. Proceedings of the 2009 International Symposium on Automobile Steel, Dalian, China., 27-32, (2009)
- C. Kords. Leistungssteigerung beim trochoiden Fräsen durch Optimierung der mikroskopischen und makroskopischen Eingriffsbedingungen. Master Thesis, RWTH Aachen, (2009)
- V. Uthaisangsuk, U. Prahl, W. Bleck. Microstructure based failure analysis of multiphase steels using damage mechanics modeling. TMS 2009, 138th Annual Meeting & Exhibition, Supplemental Proceedings, Materials Characterization, Computation and Modeling, 2, 335-343, (2009)
- M. Fischer, F. Gerdemann, W. Bleck. Object based quantitative analysis of complex multiphase microstructures in steel. EPD Congress 2009, TMS 2009, San Francisco (CA), 101-109, (2009)
- W. Bleck. Quantum mechanics guided design of new Fe based materials. Proceedings of the Workshop on High Mn Steels, Pohang, 1, 1-39, (2009)
- J. von Appen, W. Bleck, S. Brühl et al. SFB 761 - Stahl ab initio: Quantenmechanisch geführtes Design neuer Eisenbasiswerkstoffe. Jahresmagazin Ingenieurwissenschaften, 132-134, (2009)
- W. A. Counts, M. Friák, D. Raabe et al. Using ab initio calculations in designing bcc Mg–Li alloys for ultra-lightweight applications. Acta Materialia, 57 , 69-76, (2009)
2008
- W.A. Counts, M. Friák, C.C. Battaile et al. A comparison of polycrystalline elastic properties computed by analytic homogenization schemes and FEM. Physica Status Solidi b, 245, 2630 - 2635, (2008)
- D. Lencer, M. Salinga, B. Grabowski et al. A map for phase-change materials. Nature Materials, 7, 972-978, (2008)
- T. Qin, R. Drautz, D. G. Pettifor. Binding-energy relations and equations of state for the 4d and 5d transition metals. Physical Review B, 78, 214108,1-12, (2008)
- F. Otto, J. Frenzel, G. Eggeler. Strukturbildungsprozesse bei der thermomechanischen Behandlung von Kupfer durch Rundkneten. Metall, 62, 612, (2008)
- Y. Schneider, A. Bertram, T. Böhlke et al. Plastic deformation behaviour of Fe-Cu composites modelled by real morphologies. MicroMacro-Interactions, 63-76, (2008)
- K. Higashida, M. Tanaka, A. Hartmaier et al. Analyzing crack-tip dislocations and their shielding effect on fracture toughness. Materials Science and Engineering, A 483, 13-18, (2008)
- T. Qin, R. Drautz, D. G. Pettifor. Equation of state for transition metals. Physical Review B, 77, 220103,1-4, (2008)
- D. Peter, J. Pfetzing, M. Wagner et al. Quantitative Characterisation and Microstructural Anisotropy of a Hot-Extruded TiAl Alloy. Praktische Metallographie, 45, 210-224, (2008)
- S.P. Brookes, H.J. Kühn, B. Skotzki et al. Axial-torsional thermo-mechanical fatigue of Ti-45Al-5Nb-0.2B-0.2C. Proceedings of the Structural Aluminides for Elevated Temperatures Symposium, 103-109, (2008)
- M. Apel, I. Steinbach. Dendritic solidification in the diffuse regime and under the influence of buoyancy-driven melt convection. Phase Transformations in Multicomponent Melts, 373-385, (2008)
- J. Imlau, W. Bleck, S. Zaefferer et al. Development of a simulation approach to microstructure evolution during solidification and homogenization using the phase-field method. Superalloys, 951-960, (2008)
- I. Steinbach. Effect of interface anisotropy on spacing selection in constrained dendrite growth. Acta Materialia, 56, 4965-4971, (2008)
- D. Rupp, X. Zeng, S.M. Weygand et al. Loading rate dependence of the fracture toughness of polycrystalline tungsten in the brittle and semi-brittle regime: experiments and modelling. Proceedings of 17th European Conference on Fracture (ECF17), 667, (2008)
- D. Peter, M. Wagner, G. Eggeler. Mikrostruktur und Kriechen einer stranggepressten TiAl-Legierung. Praktische Metallographie, 40, 317-322, (2008)
- D. Ma, M. Friák, J. Neugebauer et al. Multiscale simulation of polycrystal mechanics of textured β-Ti alloys using ab initio and crystal-based finite element methods. Physica Status Solidi b, 245, 2642 - 2648, (2008)
- F. Gerdemann, C. Keul, W. Bleck. Bainitumwandlung in Stählen mit mittlerem Kohlenstoffgehalt. Simulation von Umformprozessen, MEFORM, 50-64, (2008)
- F. Gerdemann, M. Fische, C. Keul et al. Charakterisierung von bainitischen Stählen. Werkstofftechnik, Tagungsband zum 23. Aachener Stahlkolloquium “Stahl – ein exzellenter Werkstoff", 185-195, (2008)
- J. Imlau, W. Bleck, S. Zaefferer. Crack development in dependence of the local microstructure in Al-Trip steels. New developments on metallurgy and applications of high strength steels, (2008)
- M. Tanaka, Y. Hoshino, A. Hartmaier et al. Crack tip dislocations and its shielding effect. Materials Science Forum, 561-565, 1833-1836, (2008)
- T. Hickel, M. Uijttewaal, B. Grabowski et al. Determination of symmetry reduced structures by a soft-phonon analysis in Ni2MnGa. Materials Research Society Symposium Proceedings, 1050, 1050-BB03-02, (2008)
- T. Hickel, M. Uijttewaal, B. Grabowski et al. Determination of symmetry reduced structures using a soft phonon analysis for magnetic shape memory alloys. Journal of Physics: Condensed Matter, 20, 064219, (2008)
- Ch. A. Gandin, I. Steinbach. Direct modeling of structure formation. ASM Handbook, 15, 435-444, (2008)
- M. Friák, W.A. Counts, D. Raabe et al. Error propagation in multiscale approaches to the elasticity of polycrystals. Physica Status Solidi (b), 245, 2636 - 2641, (2008)
- L. Ismer, J. Ireta, J. Neugebauer. First-principles free-energy analysis of helix stability: The origin of the low entropy in π helices. Journal of Physical Chemistry B, 112 , 4109-4112, (2008)
- N. C. Broedling, A. Hartmaier, H. Gao. Fracture toughness of layered structures: Embrittlement due to confinement of plasticity . Engineering Fracture Mechanics, 75, 3743-3754 , (2008)
- F. Körmann, A. Dick, B. Grabowski et al. Free energy of bcc iron: Integrated ab initio derivation of vibrational, electronic and magnetic contributions. Physical Review B, 78, 033102,1-4, (2008)
- F. Körmann, A. Dick, B. Grabowski et al. Free energy of bcc iron: Integrated ab initio derivation of vibrational, electronic, and magnetic contributions. Physical Review B, 78, 033102, (2008)
- W. Bleck, F. Gerdemann. Improved mechanical properties by control of bainite transformation. Thermo-Mechanical Simulation and Processing of Steels, 2nd International Conference SimPro, 12-23, (2008)
- V. Uthaisangsuk, U. Prahl, W. Bleck. Micromechanical modelling of damage behaviour of multiphase steels. Computational Materials Science , 43, 27-35, (2008)
- I. Steinbach. Microstructure evolution and phase transitions in metals simulated by the multi-phase-field method. La Revue de Métallurgie, 105, 637-640, (2008)
- W. Bleck, W. Dahl, S. Münstermann. Modellierung von Schädigung und Versagen bei der Kaltumformung von Feinblech. Umformtechnik im Spannungsfeld zwischen Plastomechanik und Werkstofftechnik, 53-69, (2008)
- T. Hammerschmidt, B. Seiser, R. Drautz et al. Modelling topologically close-packed phases in superalloys: Valence-dependent bond-order potentials based on ab-initio calculations. Superalloys, 847-853, (2008)
- M. Fischer, F. Gerdemann, W. Bleck et al. Objektbasierte quantitative Analyse von komplexen Mikrostrukturen in Stählen. Fortschritte in der Metallographie, Vortragstexte der 42. Metallographie-Tagung, 243-248, (2008)
- B. Boettger, M. Apel, J. Eiken et al. Phase-field simulation of solidification and solid-state transformations in multicomponent steels. Steel Research International, 79, 608-616, (2008)
- N. C. Broedling, A. Hartmaier, M. J. Buehler et al. The strength limit in a bio-inspired metallic nanocomposite. Journal of the Mechanics and Physics of Solids, 56, 1086-1104 , (2008)